2014 Land Rover Range Rover Sport Technical Service Bulletins

1,006 technical service bulletins (TSBs) are on record for the 2014 Land Rover Range Rover Sport. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10106108Jan 18, 2016Electrical system, Equipment. "issue: a customer may report that the global positioning system (gps) icon has a strike through line across it, when navigation is selected. In addition the current vehicle location indicator will not lock onto the correct location on the map. Cause: software error."
• 10106104Jan 18, 2016Electrical system. "issue: a customer may report the vehicle steering feels heavy potentially accompanied by visual or audible warnings through the instrument pack. The following dtcs may also be logged: epas dtcs logged: -b1304-16: electronic power assisted steering (epas) system circuit voltage below threshold -u3001-00: power steering control module (pscm) system improper shutdown. These may be accompanied by: -u0001-87 / 88 high…
• 10106105Jan 15, 2016Visibility (wipers, defrost, mirrors). "issue: range rover (l405) and range rover sport (l494), customers may report that the 2nd row drop and fixed glass appears reddish in colour when compared to the 1st & 3rd row glass. The issue can only be seen in certain direct lighting conditions. See attached photos for examples. Cause: the pigment in the laminate of the glass is visible."
• 10106107Jan 5, 2016Electrical system. "issue: a customer may report that intermittently a ‘low battery warning’ message is displayed on the instrument cluster message centre, when the vehicle ignition is switched on after the vehicle has been parked overnight. In addition a clicking noise may be heard from the rear junction box when the ignition is switched on. Cause: software calculation."
• 10106064Dec 22, 2015Equipment, Electrical system. "issue: when using symptom driven diagnostics (sdd) to program a new remote function actuator - rfa (referred to as the keyless vehicle module - kvm on sdd) on either a range rover (all new) - l405 or range rover sport - l494 14 to 15 my that has a hardware part number prefix of 'fk72', sdd will resolve the incorrect software and the software download will fail. Cause: some files used by sdd to resolve the required…
• 10106056Dec 22, 2015Suspension. "issue: a customer may report that during certain driving manoeuvres there is a groan noise from the suspension that lasts approximately 1 second. The main driving manoeuvres associated with this are: 1. Steering right and then hitting a bump/ridge in the road very soon after. 2. Steering to the right and then sharply steering to the left. Cause: this is caused by the fluid moving within the dynamic response valve…
• 10106003Dec 22, 2015Fuel system, Engine. "situation: a metallic 'clicking' / 'rasping' noise may be evident from the engine. The noise may be more noticeable when the engine is at idle speed and when the engine is cold. Cause: this may be caused by a noisy high pressure fuel pump outlet valve."
• 10106050Dec 21, 2015Brakes, Exterior lighting. "issue – squeak noise when brake pedal is operated. Cause – brake light switch / brake pedal shim interaction. Note: not all vehicles will be fitted with brake pedal shim."
• 10106001Dec 21, 2015Electrical system, Equipment. "situation: the steering wheel left-hand audio control switch (volume, seek, ok/menu, mode, phone, and voice) may exhibit intermittent operation, causing one or more of the following issues: • audio volume will not adjust (up and/or down) • radio seek buttons will not operate • volume control buttons cause the radio station to change • the infotainment system is slow to operate (blank screen followed by the 'land…
• 10106059Dec 15, 2015Electrical system. "issue: l405 – range rover: from 14my onwards l494 – range rover sport: from 14my onwards l538 – range rover evoque: from 14my onwards l550 – land rover sport: from 15my onwards when fitting a new remote function actuator (rfa) (referred to as the keyless vehicle module - kvm on sdd) with a module part number of: fk72-19h440 - ae fk72-19h440 - be fk72-19h440 - af fk72-19h440 - bf sdd cannot communicate with the rfa.
• 10106051Dec 14, 2015Tires, Equipment. "issue: a number of instances have been reported where a loss of pressure in tyres has been observed with associated tyre pressure monitoring system (tpms) warning messages. Customers and retailers have been unable to re-inflate and maintain service pressures due to leakage from the tpms valves. Issue may affect: 15my and 16my range rover evoque, discovery sport, range rover (all new), discovery 4/lr4, range rover…
• 10106005Dec 10, 2015Engine cooling. "situation: a 'humming' noise may be evident from the engine at idle. Cause: this may be caused by dust and/or water ingress to the accessory drive belt idler pulley bearing."
• 10106055Dec 3, 2015Suspension. "issue: a customer may report that during certain driving manoeuvres there is a groan noise from the suspension that lasts approximately 1 second. The main driving manoeuvres associated with this are: 1. Steering right and then hitting a bump/ridge in the road very soon after. 2. Steering to the right and then sharply steering to the left. Cause: this is caused by the fluid moving within the dynamic response valve…
• 10106046Dec 2, 2015Electrical system, Steering, Equipment. "issue: a customer may report the vehicle steering feels heavy potentially accompanied by visual or audible warnings through the instrument pack. The following dtcs may also be logged: epas dtcs logged: -b1304-16: electronic power assisted steering (epas) system circuit voltage below threshold -u3001-00: power steering control module (pscm) system improper shutdown. These may be accompanied by: -u0001-87 / 88 high…
• 10105965Nov 17, 2015Transmission and drivetrain, Electrical system. "description to address concerns with the correct operation of the oxygen (o2) sensors, updated powertrain control module (pcm) software is required on the models, model years, engine variants, and vehicle identification number (vin) ranges as listed in the affected vehicle range."
• 10105961Nov 17, 2015Electrical system, Engine cooling. "situation: to address concerns with the correct operation of the oxygen (o2) sensors, updated engine control module (ecm) software is required on the models, model years, engine variants, and vehicle identification number (vin) ranges as listed in the affected vehicle range.
• 10204843Nov 11, 2015Electrical system. Technical Bulletin: Loss Of Drive or flashing gear selector LED Inndicator and/or Related Intelligent Stop/Start Issues
• 10105908Nov 11, 2015Transmission and drivetrain, Electrical system. "situation: one of the following issues may occur: • the gear selector led indicator flashes and neutral is involuntarily engaged when coming to a stop or immediately after an automatic engine restart (when intelligent stop/start is active)."
• 10105922Nov 9, 2015Brakes. "situation: on vehicles fitted with the high performance brake system (380mm diameter front brake disc), a 'squeal' noise may be heard from the front brakes during low-speed, light-to-moderate brake pedal application, until the vehicle comes to a stop. Cause: this may be caused by front brake pad resonance."
• 10105981Nov 5, 2015Engine. "issue: customers may report the engine management light (mil) is illuminated with the possibility of a ‘no engine restarts in xxx miles, diesel exhaust fluid dosing malfunction” warning message displayed within the instrument cluster message center and dtc’s p208b-00/p2bae-00/p2baf-00 stored in the pcm (powertrain control module) cause: air in the system."
• 10105863Oct 30, 2015Electrical system, Equipment. "issue the wrong component maybe replaced when troubleshooting bluetooth connectivity in car. Cause the front control display interface module(touchscreen) has no effect on bluetooth connectivity in the car and as such may be incorrectly diagnosed and replaced as the source of the issue."
• 10105868Oct 26, 2015Equipment, Electrical system, Steering. "issue: a customer may report that a set of blue road wheels appear in the message centre on the instrument cluster, when the terrain response control is set to auto mode. On occasions the wheel position shown in the message centre appears to remain in a constant position that does not match the road wheel position. The display will return to normal when the vehicle is stationary. Please view the attachment that…
• 10105866Oct 22, 2015Electrical system, Equipment. "issue: post a service interval reset, on key through starts only, the service required message will appear on the instrument cluster for <1 second (when no service is required). No customer symptoms until a service reset has been performed. When an actual service is required the message will appear for 4 seconds as design intent. Cause: distance to next service initialisation value management between ecm and…
• 10105885Oct 14, 2015Other or unknown, Equipment. "issue: a number of reports have been recieved where dealers or ports have reported that either the front / rear or both towing eye covers are incorrect specification cause: currently under investigation and engineering"
• 10105884Oct 8, 2015Equipment, Visibility (wipers, defrost, mirrors). "issue: customers may report that the powerfold door mirrors will not powerfold or are loose -see attached file cause: customers or external influences such as car washes may inadvertantly knock the door mirror head into the folded position, this will then cause the mirror head to be loose"
• 10105832Oct 7, 2015Electrical system, Engine. "situation: at temperatures of 32°f (0°c ) or below, there may be only a 'click' noise heard when trying to start the engine and the engine will not start. Cause: this may be caused by ice on the solenoid contacts."
• 10105827Oct 7, 2015Engine. "situation: a 'humming' noise may be evident from the engine when the engine is idling. Cause: this may be caused by dust and/or water ingress to the primary drive belt idler pulley bearing."
• 10105816Sep 30, 2015Brakes. "issue: a customer may report a continuous squeal noise from the rear high performance brakes. Cause: a lack of greasing during pad replacement or brake usage characteristic."
• 10105725Sep 30, 2015Electrical system, Engine cooling. "situation: the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find one or more diagnostic trouble c ode (dtc ), listed in the table below and relevant to the heated oxygen sensors (ho2s), may be stored in the engine control module (ecm). Cause: this may be caused by thermal shock when water contacts the heated sensing element."
• 10105762Sep 29, 2015Electrical system. "situation: the vehicle battery imay be flat or one of the following messages/warning lights may be displayed on the instrument cluster: • faulty generator • faulty battery monitoring system (bms) • the charge warning indicator is illuminated when the engine is running. Cause: the power supply is a fully integrated system that requires sdd to diagnose overall functionality robustly to make sure customer…
• 10105741Sep 29, 2015Body and structure. "situation: the underhood lower noise vibration harshness (nvh) pad(s) may show signs of ripping, tearing, and/or has a poor finish. Cause: this may be caused by ice build up between the foam surfaces and the hood causing penetration into the foam."
• 10105730Sep 29, 2015Seats. "situation: a 'creak' noise from the front seat may be evident. Cause: this may be caused by metal-to-metal contact between the seat suspension mat hooks and the seat frame and may be verified by visual inspection of seat support mat location hole wear."
• 10105724Sep 28, 2015Body and structure. "situation: a procedure has been developed for the installation of a-pillar exterior trim. Cause: replacement of the a-pillar exterior trim."
• 10105727Sep 25, 2015Brakes. "situation: on vehicle fitted with the high performance brake system, a 'squeal' noise may be heard from the rear brakes during light braking at low speeds. Cause: this may be caused by the shape of the rear brake pad allowing it to resonate and cause a 'squeal' noise."
• 10105814Sep 24, 2015Steering, Electrical system. "issue: a customer may report that a set of blue road wheels appear in the message centre on the instrument cluster, when the terrain response control is set to auto mode. On occasions the wheel position shown in the message centre appears to remain in a constant position that does not match the road wheel position. The display will return to normal when the vehicle is stationary. Please view the attachment that…
• 10105731Sep 23, 2015Transmission and drivetrain. "situation: after an eco stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted and then drive (d) or sport (s) is selected, vehicle operation returns…
• 10105723Sep 21, 2015Visibility (wipers, defrost, mirrors). "situation: the windshield wipers may make a squeak noise, judder, or streak the windshield. Cause: this may be caused by a build-up of dirt and grease on the surface of the windshield glass."
• 10105738Sep 17, 2015Body and structure. "situation: a small gap may be seen between the rear bumper and the tailgate body aperture seal when the tailgate is open. Cause: this may be caused by the vehicle body not being to the original design specification."
• 10105781Sep 15, 2015Electrical system, Transmission and drivetrain. "situation: a 'transmission fault' message may be displayed on the instrument cluster and the vehicle has defaulted to a fixed gear 'limp home' operation. Upon diagnosis, a technician may find diagnostic trouble code (dtc) p0780-93 stored in the transmission control module (tcm). Cause: this may be caused by an error in the tcm software."
• 10105808Sep 3, 2015Equipment. "issue: a customer may report that the surface of the ‘p’ button on the gear shift lever is wearing with loss of definition of the paint finish. Please view attachment that shows the condition. Cause: paint surface finish process"
• 10105729Sep 2, 2015Body and structure. "situation: the hood may foul the front door and/or fender, causing the paint to be worn away. Cause: this may be caused by softening of the engine compartment / hood seals, allowing the factory hood setting to move."
• 10105586Aug 27, 2015Electrical system, Exterior lighting. "situation: the adaptive front lighting system (afs) warning lamp may be illuminated/flashing on the instrument cluster. Upon diagnosis, the technician may find diagnostic trouble codes (dtc) b1d64-87 and/or b1d65-87 stored in the headlamp leveling control module. Cause: this may be caused by a software error within the headlamp leveling control module."
• 10105582Aug 27, 2015Tires. "situation: a tire pressure monitoring system (tpms) fault may be displayed in the instrument cluster (ic) and diagnostic trouble codes (dtc) are stored. Cause: this may be caused by various issues."
• 10105648Aug 19, 2015Latches, locks and linkages, Equipment. "issue land rover are currently investigating body control modules (bcm) and remote function actuators (rfa) and associated components replaced for a non-start condition. Following supplier analysis the modules have been categorised as ""no fault found"". Cause currently under analysis."
• 10105662Aug 13, 2015Suspension. "issue: from inspecting market returned parts it has become apparent that multiple dynamic response roll bars have been replaced due to reported fluid leaks. Upon further inspection no faults are found with the returned roll bars. Cause: it is believed that many of the leaks reported could be coming from the piping, seals, interface or tightness of bleed screw."
• 10105643Aug 11, 2015Visibility (wipers, defrost, mirrors). "issue 10my onwards range rover, range rover sport and discovery 4 / lr4 customers may report hearing wind noise from the upper windscreen area. Cause there is a potential that the top windscreen seal has become dislodged over time causing a windnoise"
• 10105583Aug 10, 2015Engine cooling, Electrical system. "situation: on vehicles fitted with the 3.0l sc v6 engine only, the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find one or more diagnostic trouble code (dtc), listed in the table below and relevant to the heated oxygen sensors (ho2s), may be stored in the engine control module (ecm). Cause: this may be caused by thermal shock when water contacts the heated sensing…
• 10105584Aug 7, 2015Brakes, Transmission and drivetrain. "situation: a driveline vibration, felt through the floor and/or seat only, may be evident with the transmission in 7th/8th gear at vehicle speeds above 100kph/62mph while on overrun and/or light throttle. Cause: this may be caused by 'forcing' (eccentricity between the driveshaft and differential at the coupling) from the front and/or rear driveline."
• 10105526Jul 31, 2015Transmission and drivetrain, Engine. "situation: after an eco stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted and then drive (d) or sport (s) is selected, vehicle operation returns…
• 10105550Jul 29, 2015Electrical system, Equipment. "issue: when attempting to complete the module programming of the keyless vehicle module (kvm) sdd lists ""no software update required"" in the status of the software part confirmation screen. Cause: when sdd is used to update the kvm for p068 and the kvm has a prefix of “fk72” then the software required to update the kvm is not available to complete p068 successfully."

← All problems reported for the 2014 Land Rover Range Rover Sport