2000 Land Rover Range Rover Recalls

NHTSA lists 3 recall campaigns for the 2000 Land Rover Range Rover. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 00V377000Nov 16, 200059,445 vehicles potentially affected
  Power train › Automatic transmission
  Covers: Land Rover Range Rover 1999–2001, Discovery 1999–2001

  Reported issue: Vehicle description: certain sport utility vehicles fail to comply with the requirements of fmvss no. 114, "theft protection." water contamination of the automatic transmission oil can lead to various failure modes of the transmission. One of these failure models results in incorrect operation of the park lock function that could allow a vehicle to roll away if parked without the handbrake properly set.

  Possible consequence: Unintentional vehicle movement could result in a crash or personal injury.

  Remedy: Dealers will check the park lock function; reposition the automatic transmission breather tube; and test the automatic transmission fluid and flush if necessary.

  Full campaign details →

• 00V142001Oct 16, 200036,911 vehicles potentially affected
  Electronic stability control › Automatic (asc)
  Covers: Land Rover Range Rover 1999–2000, Discovery II 1999–2000

  Reported issue: Vehicle description: sport utility vehicles. The loading conditions on the vehicle's left side engine idler pulley can exceed the maximum calculated figure of the original design specification. The material of the pulley can fracture and ultimately fail. Failure of the pulley material can cause the pulley to throw off the serpentine belt.

  Possible consequence: This could result in a loss of engine auxiliary functions (power steering, water pump, alternator, air conditioning and ace).

  Remedy: Dealers will install an improved idler pulley.

  Full campaign details →

• 00V187000Jul 3, 2000314 vehicles potentially affected
  Service brakes, hydraulic › Foundation components › Disc › Caliper
  Covers: Land Rover Range Rover 2000

  Reported issue: Vehicle description: sport utility vehicles. One or both of the bolts that retain the brake caliper to the axle may have missed a final assembly torque operation. Consequently they may be loose or possibly missing.

  Possible consequence: Caliper disengagement from the axle could result causing reduced vehicle stability when braking and possibly locking up of the affected wheel.

  Remedy: Dealers will inspect these vehicles to verify that the proper torque has been applied.

  Full campaign details →

← All problems reported for the 2000 Land Rover Range Rover