2015 Land Rover Range Rover Technical Service Bulletins

718 technical service bulletins (TSBs) are on record for the 2015 Land Rover Range Rover. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10105724Sep 28, 2015Body and structure. "situation: a procedure has been developed for the installation of a-pillar exterior trim. Cause: replacement of the a-pillar exterior trim."
• 10191296Sep 26, 2015Electrical system. Unable to reset the service internal indicator.
• 10105731Sep 23, 2015Transmission and drivetrain. "situation: after an eco stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted and then drive (d) or sport (s) is selected, vehicle operation returns…
• 10105736Sep 17, 2015Suspension. "situation: the air suspension system may not raise/lower with a warning displayed on the instrument cluster and diagnostic trouble c odes (dtc ) c 1a13-64, c 1a36-01, and/or c 1a24-67 may be stored. Cause: this may be caused by the exhaust valve within the air suspension system compressor 'sticking' due to manufacturing issues."
• 10105781Sep 15, 2015Electrical system, Transmission and drivetrain. "situation: a 'transmission fault' message may be displayed on the instrument cluster and the vehicle has defaulted to a fixed gear 'limp home' operation. Upon diagnosis, a technician may find diagnostic trouble code (dtc) p0780-93 stored in the transmission control module (tcm). Cause: this may be caused by an error in the tcm software."
• 10105759Sep 15, 2015Transmission and drivetrain. "situation: when in sport (s) mode, the transmission may change gears only manually (via steering wheel mounted shift paddles or the gear selector [range rover sport only]) and does not revert back to auto mode. Cause: this may be caused by an incorrect calibration causing the vehicle to enter manual only mode when the 'progress control system' selects a mode of operation."
• 10105740Sep 15, 2015Body and structure, Electrical system. "situation: the tailgate close function may be intermittently inoperative when using the smart key. Cause: this may be caused by a software issue within the central junction box (cjb) that does not 'wake' the can bus when requesting signals for dual power tailgate system."
• 10105802Sep 10, 2015Brakes, Electrical system. "issue: customer may report concerns with automatic parallel parking maneuver. Cause: park assist module (pam) software concern."
• 10105806Sep 3, 2015Electrical system, Engine. "issue: following resetting the service interval using sdd or manually, the service required message will appear on the instrument cluster for a short period during a key through engine start (not turning on ignition before attempting to start). Vehicles affected (gasoline only): l405 2015 model year aj126sc l405 2015 model year aj133sc l494 2015 model year aj126sc l494 2015 model year aj133sc cause: can timing…
• 10105786Sep 3, 2015Lane departure. "situation: an issue has been identified on a limited number of 2015 model year lr4 (l319), range rover evoque (l538), range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress. Action: retailers are required to hold only affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale…
• 10105729Sep 2, 2015Body and structure. "situation: the hood may foul the front door and/or fender, causing the paint to be worn away. Cause: this may be caused by softening of the engine compartment / hood seals, allowing the factory hood setting to move."
• 10105582Aug 27, 2015Tires. "situation: a tire pressure monitoring system (tpms) fault may be displayed in the instrument cluster (ic) and diagnostic trouble codes (dtc) are stored. Cause: this may be caused by various issues."
• 10105669Aug 25, 2015Electrical system, Equipment, Latches, locks and linkages. "note this phenomenon can only happen under specific circumstances; it is only when both keys are in close proximity of each other in the vehicle and requires the exterior door handle lock button to be pressed. Issue it has been highlighted that it is possible to lock the vehicle with both keys inside. Keys are held together by cable ties when delivered to the retailer."
• 10105667Aug 24, 2015Steering. "issue: residue being left on steering wheel when transportation steering wheel cover is removed. Cause: under investigation"
• 10105659Aug 24, 2015Body and structure. "issue: noise from the front door check strap on range rover (l405) - part number lr045540. Cause: on some vehicles the front door check strap fixing bolts torque may be too low."
• 10105657Aug 24, 2015Body and structure, Equipment. "issue rear spoiler contact with “d” post marking both trim panel and / or spoiler (see attached picture) on range rover (l405). Cause incorrect setting during manufacturing process."
• 10105648Aug 19, 2015Latches, locks and linkages, Equipment. "issue land rover are currently investigating body control modules (bcm) and remote function actuators (rfa) and associated components replaced for a non-start condition. Following supplier analysis the modules have been categorised as ""no fault found"". Cause currently under analysis."
• 10105662Aug 13, 2015Suspension. "issue: from inspecting market returned parts it has become apparent that multiple dynamic response roll bars have been replaced due to reported fluid leaks. Upon further inspection no faults are found with the returned roll bars. Cause: it is believed that many of the leaks reported could be coming from the piping, seals, interface or tightness of bleed screw."
• 10075602Aug 13, 2015Transmission and drivetrain. Summary to be provided on a future date.
• 10105643Aug 11, 2015Visibility (wipers, defrost, mirrors). "issue 10my onwards range rover, range rover sport and discovery 4 / lr4 customers may report hearing wind noise from the upper windscreen area. Cause there is a potential that the top windscreen seal has become dislodged over time causing a windnoise"
• 10105583Aug 10, 2015Engine cooling, Electrical system. "situation: on vehicles fitted with the 3.0l sc v6 engine only, the engine malfunction indicator lamp (mil) may be illuminated. Upon diagnosis, the technician may find one or more diagnostic trouble code (dtc), listed in the table below and relevant to the heated oxygen sensors (ho2s), may be stored in the engine control module (ecm). Cause: this may be caused by thermal shock when water contacts the heated sensing…
• 10105609Aug 3, 2015Transmission and drivetrain. "description an issue has been identified on a limited number of 2015 model year range rover sport (l494; 3.0l sc v6 only) and range rover (l405; 3.0l sc v6 only) vehicles where a flashing 'd' is displayed in the transmission control switch (tcs) after an eco stop/start event and/or a 'gearbox fault' message is displayed in the instrument cluster, the vehicle has defaulted to limp home mode, and diagnostic trouble…
• 10105601Aug 3, 2015Transmission and drivetrain. "situation: an issue has been identified on a limited number of 2015 model year range rover sport (l494; 3.0l sc v6 only) and range rover (l405; 3.0l sc v6 only) vehicles where a flashing 'd' is displayed in the transmission control switch (tcs) after an eco stop/start event and/or a 'gearbox fault' message is displayed in the instrument cluster, the vehicle has defaulted to limp home mode, and diagnostic trouble…
• 10105537Jul 31, 2015Electrical system, Equipment. "issue a customer may experience their touch screen resetting / going ""black/blank"" during their ignition cycle and then restarting as if the ignition was cycled. The land rover logo will appear and the system will function normally after the reset occurs. Cause touch screen software concern."
• 10105526Jul 31, 2015Transmission and drivetrain, Engine. "situation: after an eco stop, the vehicle will not move off and the transmission may appear to be in neutral even though the transmission control switch has not been moved. The transmission gear position indicator on the gear selector and in the instrument cluster message center may be flashing 'd' or 's'. If the engine is stopped and restarted and then drive (d) or sport (s) is selected, vehicle operation returns…
• 10057690Jul 31, 2015Transmission and drivetrain, Electrical system. Land rover: after eco stop, software for transmission is causing transmission to be in neutral, even when switch was not moved, or gear position indicator on instrument cluster message is flashing d or s and would have normal operation once engine is stopped and restarted. *pe updated 9/25/15.
• 10105550Jul 29, 2015Electrical system, Equipment. "issue: when attempting to complete the module programming of the keyless vehicle module (kvm) sdd lists ""no software update required"" in the status of the software part confirmation screen. Cause: when sdd is used to update the kvm for p068 and the kvm has a prefix of “fk72” then the software required to update the kvm is not available to complete p068 successfully."
• 10105534Jul 27, 2015Electrical system. "situation: the touch screen may intermittently display a blank screen, followed by a return to normal display within the ignition cycle. Cause: this may be caused by a software error and/or central processing unit (cpu) data overload."
• 10105542Jul 24, 2015Forward collision avoidance, Equipment. "issue: the message ""radar sensor blocked"" appears in instrument pack display. If blockage occurs while acc is being used, “driver intervene” and/or ""radar sensor blocked"" message will appear on the cluster and dtc c1a67-97 set. Blockage can also occur when acc is not being used. Cause: ""radar sensor blocked"" indicates that the adaptive speed control system's visibility has been reduced due to an obstruction…
• 10105660Jul 23, 2015Latches, locks and linkages, Body and structure, Equipment. "issued august 2015. Issue: a customer may report any of the following vehicle symptoms: 1. Intermittently the rear doors do not lock when the remote plip button is pressed. 2. Drivers seat switchpack inoperative 3. Rear doors show open on the instrument cluster when they are fully closed. 4. Remote central locking inoperative. 5. Window switchpack inoperative. 6. Interior compartment lights illuminated, when not…
• 10105544Jul 23, 2015Seats, Electrical system, Body and structure, Latches, locks and linkages. "issue: a customer may report any of the following vehicle symptoms: 1. Intermittently the rear doors do not lock when the remote plip button is pressed. 2. Drivers seat switchpack inoperative 3. Rear doors show open on the instrument cluster when they are fully closed. 4. Remote central locking inoperative. 5. Window switchpack inoperative. 6. Interior compartment lights illuminated, when not required. Cause…
• 10105530Jul 21, 2015Equipment. "situation: a chemical/plastic odor from the climate control system may be evident. Cause: this may be caused by parameters within the climate control system not operating efficiently."
• 10105529Jul 21, 2015Equipment. "situation: poor air conditioning performance when the engine is idling may be experienced. The technician will evaluate it as follows: • the air temperature emitted from the face vent outlets may cycle between very cold and warm every 1-2 minutes. • the air temperature emitted from the face vent outlets may exhibit an intermittent fault, blowing warm air consistently, then after restarting the vehicle or after…
• 10105527Jul 21, 2015Electrical system, Steering. "situation: the heated steering wheel (hsw) may operate when not requested. Cause: this may be caused by a software error in the steering wheel heater control module (swh)."
• 10058470Jul 21, 2015Steering. Land rover: due to steering wheel heater control module (swh) software error, the steering wheel (hsw) operates when its not requested to so. Model 2013-15 range rover sport, range rover.
• 10105540Jul 14, 2015Electrical system. "issue: diagnostic trouble code (dtc) u001187 ‘medium speed can communication bus performance – missing message’ may be noted in the auxiliary control module (aucm) during a symptom driven diagnostics (sdd) fault code read. Cause: software calculation"
• 10105546Jul 13, 2015Equipment, Electrical system, Brakes. "issue: after programming the park assist module, technicians have reported that the system is no longer operational and may store u2300-xx central configuration codes. Cause: park assist module (pam) software concern."
• 10058475Jul 13, 2015Electrical system. Land rover: due to software issue when some vehicles were programmed for park assist module, the system failed and was not operational. Model 2015 range rover, sport.
• 10105021Jun 22, 2015Engine cooling. "situation: an issue has been identified on a limited number of 2015 model year range rover sport (l494) and range rover (l405) vehicles where a 'low coolant' warning is illuminated on the instrument cluster due to coolant leaking through the lower part of the coolant expansion tank.
• 10104921Jun 16, 2015Electrical system. "situation: one or more of the following issues may be evident: • the alarm is triggered for no apparent reason; • the 'hood open' message is displayed on the instrument cluster; and/or • a mislock sound is emitted when locking the vehicle. Cause: these issues may be caused by a faulty hood open switch."
• 10105041Jun 5, 2015Lane departure. "description a potential issue has been identified on 2015 model year lr4 (l319), range rover evoque (l538). Range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress"
• 10104962Jun 5, 2015Lane departure, Equipment. "situation: an issue has been identified on a limited number of 2015 model year lr4 (l319), range rover evoque (l538), range rover sport (l494), and range rover (l405) vehicles where the blindspot monitoring control module (bmcm) may experience water ingress. Action: retailers are required to hold only affected new vehicles that are within your control and refrain from releasing the vehicles for new vehicle sale…
• 10058487Jun 5, 2015Suspension. Land rover: due to torque specification being incorrectly listed in service instruction, the front suspension lower control arm to knuckle bolt(s) has failed, in certain vehicles. No model or years listed.
• 10058468Jun 5, 2015Equipment. Land rover: some vehicles are experiencing water ingress where blindspot monitoring control module (bmcm) is located. Model 2015 range rover, sport, evoque, lr4.
• 10058464Jun 5, 2015Equipment. Land rover: some vehicles will experience water intrusion on blindspot monitoring control module (bmcm). Model 2015 lr4, evoque, sport, range rover.
• 10105082Jun 1, 2015Latches, locks and linkages, Body and structure. "issue l405 range rover and l494 range rover sport customers may report a ‘creak’ or ‘squeak’ from either of the front or rear doors cause possible causes could be :- •obstruction within door aperture or door latch •incorrect door striker- alignment/adjustment •door frame seal coating •worn/damaged door frame seal(s) •worn/damaged door aperture seal(s) •paint wear"
• 10105081Jun 1, 2015Electrical system. "issue b1412-96 being flagged in the gateway module cause under investigation."
• 10104681May 27, 2015Electrical system. "issue: a new vct solenoid has been fitted to a 3.0l aj126 or 5.0l aj133 engine which requires a link harness in order to be installed on vehicles built with the prior part. Cause: the vct solenoid design changed, and the electrical connector on the vct solenoid is a different size."
• 10104601May 26, 2015Latches, locks and linkages, Electrical system. "issue: if the driver's door is closed at the exact time as the transit relay cuts power to the car and the door is 'soft closing', the soft close lever in the door latch may block the release of the latch claw from the door striker and thus prevent the door from opening externally.
• 10104521May 26, 2015Electrical system, Transmission and drivetrain. "situation: on vehicles fitted with the 3.0l sc v6 engine and 8hp45 transmission only, a 'gearbox fault' message may be displayed in the instrument cluster and the transmission defaults to fixed gear 'limp-home' mode. Diagnostic trouble code (dtc) p07dc-07, p07dd-07, and/or p2702-07 may be stored in the transmission control module (tcm).

← All problems reported for the 2015 Land Rover Range Rover