2019 Mazda MAZDA3 Technical Service Bulletins

827 technical service bulletins (TSBs) are on record for the 2019 Mazda MAZDA3. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10199721Jul 1, 2021Equipment. If both key transmitters are lost, MDARS key programming functions may be missing, not allowing new key transmitters to be added. Use the procedure below to program new key transmitters when both keys are lost.
• 10198676Jun 24, 2021Equipment. MAZDA CONNECT Symptom Troubleshooting (7th Generation Vehicles). Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure
• 10198573Jun 24, 2021Fuel system. Some vehicles may exhibit a deformed fuel-filler lid panel (1) attached to the fuel-filler lid box, resulting in a poor appearance. This concern is caused by the lid box not having enough water drainage capability which leads to the accumulation of water inside it. The water then freezes in cold weather and expands or the inner side of the lid panel absorbs the water and swells from long exposure, deforming the lid…
• 10198572Jun 17, 2021Body and structure. Some vehicles may exhibit that the liftgate interferes with the rear bumper when closed forcefully, resulting in damaged paint on the rear bumper. Due to variations of the clearance between the liftgate and the rear bumper, the bottom edge of the liftgate may overrun the rear bumper. To correct this concern, the following steps have been taken: Phase 1 - The hardness of stop rubbers on the liftgate has been…
• 10198569Jun 17, 2021Equipment, Brakes. Some customers may complain about the following braking concerns when coming to a stop while following a vehicle ahead using Mazda Radar Cruise Control with Stop and Go function (MRCC). Harder braking at slow speeds just before a complete stop. Before coming to a complete stop, the vehicle creeps towards the vehicle ahead and Depress Brake Pedal warning message may appear in the instrument cluster. This is caused…
• 10198674Jun 15, 2021Engine cooling, Brakes. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn…
• 10198673Jun 15, 2021Equipment. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method A. Auxiliary Key Trace Cut Method If only one auxiliary key is lost/missing, some key cutting machines can trace cut a new key blank. 1. Trace cut the new auxiliary key blank(s). B. Auxiliary Key Code Cut Method If both auxiliary keys are lost/missing, use this method for cutting…
• 10198570Jun 10, 2021Engine cooling, Latches, locks and linkages, Electrical system. Some customers may experience all of following symptoms: The door lock/unlock operation will not work using the remote transmitter button. The door lock/unlock operation will not work using the door lock/release touch sensor. The engine will not start using the ignition switch. This is caused when excess load is applied to the remote transmitter and the electrical terminals in it may be deformed, causing poor…
• 10198689Jun 9, 2021Equipment. Accessory instructions can be found on OneMazda under Dealer Resources - Parts & Accessories. The links provided below can be used for quick access: For 2016 models and newer: NOTE: Instructions are found under the "Attachments" section once a part is selected. Accessories E-catalog For models prior to 2016: Accessory Parts and Installation Instructions
• 10198691Jun 7, 2021Visibility (wipers, defrost, mirrors). Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10198677Jun 4, 2021Equipment, Electrical system. APPLE CARPLAY / ANDRID AURO FREQUENTLY ASKED QUESTIONS (FAQ) The following vehicles are not equipped with Apple CarPlay / Android Auto, but it can be activated using MDARS. See Activation instructions on MGSS -> Infotainment -> MAZDA CONNECT Updates -> Apple Carplay / Android Auto MDARS Activation Instructions
• 10198672Jun 4, 2021Electrical system, Equipment. Some customer may experience all of the following when turning the ignition ON under hot weather conditions such as parking under the hot sun for some period of time: i-ACTIVSENSE warning light ON (1), Smart Brake Support (SBS) indicator light ON (2), "Excessive Camera Temp. Drive Safely" or "Safety and Driver Support Systems Temporarily Disabled" warning messages, DTC B14F9:00 stored in memory, DTC B14F9:00 cannot…
• 10198678Jun 2, 2021Electrical system, Equipment. When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. CAUTION: If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to…
• 10198675Jun 2, 2021Exterior lighting, Engine cooling, Equipment. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
• 10198574Jun 1, 2021Visibility (wipers, defrost, mirrors). Some vehicles may experience exterior trim heat damage when parked near a glass building. This may be caused by the suns reflection. If a building creates enough of a curve with a series of flat windows, which act like mirrors, the reflections all converge at one point, focusing and concentrating the light onto the street below.
• 10194655May 25, 2021Latches, locks and linkages, Electrical system. Some CX-5 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch (A) located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector.
• 10194778May 24, 2021Engine cooling, Equipment. When the body control module (BCM) has been replaced or reprogrammed and the software is updated to the file names shown below, DTC U2050:55-BCM (Activation of remote control not implemented) may be stored in memory without any warning indication for the driver.
• 10194774May 24, 2021Brakes, Equipment. Some customers may experience an instrument cluster warning message "Safety and Driver Support Systems Partially Disabled" and DTC U0401:68 [VEHICLE CONTROL MODULE (US)] (Error signal received from PCM, DSC HU/CM, instrument cluster, or body control module (BCM)) stored. This may be caused by the customer riding the brake pedal.
• 10194759May 24, 2021Electrical system, Equipment. When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. CAUTION: If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to…
• 10194887May 18, 2021Equipment, Lane departure, Exterior lighting, Forward collision avoidance. Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles], B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen 7 vehicles build on or before March 2, 2019], No DTC - Gen 7 vehicles built after March…
• 10194891May 13, 2021Equipment. When performing vehicle services such as control unit software update, control unit registration/activation, CMU log data retrieval, etc., always use the DCA8000 OR GR8 battery charger SST to maintain battery voltage.
• 10194715May 11, 2021Engine cooling, Exterior lighting, Equipment. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on 2020 Mazda3 only). Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".
• 10194714May 11, 2021Transmission and drivetrain. There have been warranty claims submitted for growling or bearing whine noise in differentials, transfer units and transmissions where the source of the noise was a wheel bearing. This misdiagnosis can lead to multiple repair attempts, warranty debits, and additional inconvenience and/or cost to the customer. To reduce the chance of this occurring, please follow the steps outlined in the repair procedure.
• 10194716May 10, 2021Equipment, Engine cooling. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn…
• 10194659May 7, 2021Engine cooling, Equipment, Electrical system. When programming a key or installing a Genuine Mazda Accessory Remote Engine Start system, you may encounter programming difficulty. This may be caused by a customer installed aftermarket decorative trim and/or cover on the START/STOP ENGINE button. The aftermarket accessory may create electrical interference, which may interfere with programming.
• 10194765May 6, 2021Engine cooling. A new cylinder head assembly for service parts has been newly established for SKYACTIV-G 2.5 with cylinder deactivation when replacement is needed. Valves, valve springs, valve spring seats, and cotters (IN/EX) are included in the new assembly. DUE TO A SUPPLY ISSUE FOR CYLINDER HEADS, GASKET SETS, AND PARTIAL ENGINE, PLEASE CONTACT HOTLINE FOR REPAIR GUIDANCE.
• 10194657May 5, 2021Equipment, Engine cooling, Electrical system. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
• 10194762May 4, 2021Equipment. Auxiliary key blank cutting procedure: There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method, B. Auxiliary Key Code Cut Method
• 10194757May 3, 2021Forward collision avoidance, Equipment, Vehicle speed control. Some customers may complain about the following symptoms occurring when driving without anything ahead (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail). While using Mazda Radar Cruise Control (MRCC), the MRCC cancels by itself. NOTE: The customer may misinterpret MRCC cancellation as unintended braking. MRCC cancellation feels the same as the…
• 10191535Apr 30, 2021Engine cooling. Some vehicles may have the check engine light on with DTC P0524:00 or P055F:00 stored in memory. Contamination in the engine oil may cause the engine oil solenoid valve to become stuck, resulting in improper operation of the oil pump and improper oil pressure. DTC P0524:00 (Engine oil pressure too low), DTC P055F:00 (Engine oil pressure malfunction). The control software of the PCM has been modified to eliminate…
• 10191534Apr 30, 2021Engine cooling. Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. To eliminate this concern, the switchable HLA has been modified for increased oil supply to reduce air bubbles in the oil passage.
• 10191539Apr 27, 2021Electrical system. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment (and Software Update Error message on…
• 10191537Apr 27, 2021Equipment. Some customers may complain about the following symptoms occurring when driving without anything ahead (no metallic object reflects the radar wave such as a vehicle ahead, an oncoming vehicle, a road sign or a guard rail). While using Mazda Radar Cruise Control (MRCC), the MRCC cancels by itself. When MRCC is not in use, Safety and Driver Support Systems Temporarily Disabled. Front Radar Obscured.
• 10191536Apr 27, 2021Electrical system. Some customers may experience all of following symptoms: The door lock/unlock operation will not work using the remote transmitter button. The door lock/unlock operation will not work using the door lock/release touch sensor. The engine will not start using the ignition switch. This is caused when excess load is applied to the remote transmitter and the electrical terminals in it may be deformed, causing poor…
• 10191538Apr 26, 2021Equipment. APPLE CARPLAY / ANDRID AURO FREQUENTLY ASKED QUESTIONS (FAQ) The following vehicles are not equipped with Apple CarPlay™ / Android Auto™, but it can be activated using MDARS. See Activation instructions on MGSS -> Infotainment -> MAZDA CONNECT Updates -> Apple Carplay / Android Auto MDARS Activation Instructions
• 10190956Apr 22, 2021Engine cooling. Some customers may experience the CHECK ENGINE light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: The engine takes longer to warm up, The engine temperature gauge fluctuates, The low coolant temperature indicator (blue) light stays on longer or comes on while driving, Poor heater performance, especially at idle. NOTE: Vehicles with SKYACTIV-G 2.5T are not applicable.
• 10190969Apr 21, 2021Forward collision avoidance. If driving on roads with few vehicles or obstructions ahead for the front radar sensor to detect, and a Safety and Driver Support Systems Temporarily Disabled. Front Radar Obscured. Drive Safely message is temporarily displayed, this does not necessarily indicate a problem. The radar sensor may simply need to be cleaned to eliminate the warning message.
• 10190962Apr 15, 2021Body and structure. Some vehicles may exhibit that the glass run channel of the front door interferes with the rear door garnish. Since the front door glass run channel is not fixed to the door strongly enough for the following situations, cycles of door operation may result in interference and lead to damage on the seal rubber at the rear door. When the front door glass is closed, the glass run channel may be forced to move to the B…
• 10190972Apr 14, 2021Equipment. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn…
• 10190953Apr 12, 2021Transmission and drivetrain. Some vehicles may exhibit that the active air shutter is working, but DTC P05A0:00 (Active air shutter: Opening angle abnormality (sticking)) is stored in memory. This is caused by improper control software of the PCM detecting the DTC immediately without performing the failsafe operation. When the active air shutter detects unusual torque, it is designed to repeat the open/close cycles up to three times as a…
• 10190970Apr 7, 2021Equipment. Some customers may complain about an infotainment reboot and the infotainment system recovers if the Navigation SD card is removed (see attached video). NOTE: This concern may be present on a 2019-2020 Mazda3 or a 2020 CX-30 after the customer updates the Navigation SD card map software using Mazda Toolbox.
• 10190968Apr 7, 2021Equipment. MAZDA CONNECT Symptom Troubleshooting (7th Generation Vehicles). Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure
• 10190967Apr 2, 2021Visibility (wipers, defrost, mirrors). When the power windows are operated many times without being fully closed, small errors of the window position sensor may accumulate and cause improper operation of the jam-safe function. To reduce the risk of this occurrence, the AUTO function is disabled if the power window is operated 10 consecutive times without being fully closed (turning the ignition OFF and then ON does not reset the counting).
• 10190958Apr 2, 2021Equipment. Some customers may notice an unexpected collision warning or automatic braking while reversing. This concern may be due to the parking assist unit software. The Smart Brake Support (SBS-R) system may be detecting an unintended obstruction at the lower rear end of the vehicle. To eliminate this concern, the parking assist unit control software has been modified.
• 10189947Mar 16, 2021Equipment, Transmission and drivetrain, Electrical system, Exterior lighting. Some customers may complain about any of the following: Warning light, Warning message, Headlight(s) inoperative, Cannot shift out of Park, Many DTC's stored, Module communication errors
• 10189951Mar 15, 2021Equipment. IMPORTANT NOTE: Some 2020 Mazda3 vehicles may have incorrect infotainment software version 10042 installed. The incorrect software will cause MyMazda App Connected Vehicle enrollment errors. Go to SSPC1. Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App, Connected Vehicle enrollment (and Software Update Error message on…
• 10189950Mar 15, 2021Equipment, Engine cooling. MAZDA CONNECTED SERVICES - FREQUENTLY ASKED QUESTIONS (FAQ): Index: General Questions, Setup and Getting Started, Registration / Enrollment, WI-FI General Information, WI-FI How-To, WI-FI Trial Period, Interacting With The App, Service Issues, Troubleshooting, Reception Level Inspection, Dealer Processes, Conditions for Remote Engine Start Will Not Function, Conditions for Remote Engine Start Function Will turn…
• 10189797Mar 15, 2021Electrical system. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed.
• 10189827Mar 12, 2021Electrical system. Some vehicles (equipped with the Electrical supply unit (ESU) BCKA-67-5Z0B) may exhibit that DTC B2002:49 [BODY CONTROL MODULE (BCM) - Electrical supply unit (ESU) internal malfunction (No warning/indicator light ON)] will not clear with the Mazda Modular Diagnostic System (M-MDS). This is caused by improper control software of the ESU. To eliminate this concern, the control software of the ESU has been modified.
• 10189949Mar 8, 2021Equipment, Engine cooling. CHECK ENGINE LIGHT ON WITH DTC P0126:00 AND ENGINE RUNNING COOLER THAN NORMAL / POOR HEATER PERFORMANCE / LOW ENGINE COOLANT TEMPERATURE (BLUE) LIGHT ON: Some customers may experience the CHECK ENGINE LIGHT ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: The engine takes longer to warm up. The engine temperature gauge fluctuates. The low coolant temperature indicator (blue)…

← All problems reported for the 2019 Mazda MAZDA3