2019 Mazda MAZDA3 Technical Service Bulletins

827 technical service bulletins (TSBs) are on record for the 2019 Mazda MAZDA3. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10228651Dec 7, 2022Equipment. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
• 10228663Dec 1, 2022Body and structure. Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the outer mirror, and corrosion occurring on the aluminum die-cast inner base in the outer mirror. Water, including white-salty corrosion, may drip out from gaps under the outer mirror…
• 10228648Dec 1, 2022Engine cooling. Some vehicles may experience the Check Engine Light ON with DTC P0171 (Fuel Trim too Lean) and possibly DTCs P030X (Misfire). Vehicles having this concern should use the following Inspection/Repair procedure.
• 10226856Nov 22, 2022Electrical system. Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. - Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. - Symptom 2: The touch sensor of the front door outer handle does not unlock the doors.
• 10226892Nov 21, 2022Electrical system. Some customers may experience that, with a specific operation, the touch sensor of front door outer handle does not lock and unlock the doors but the remote transmitter operates correctly. Description of the specific operations: - Specific Operation 1 [MX-30]: After using cabin preconditioning or hazard warning lights for approx.15 minutes. - Specific Operation 2 [MAZDA3 and CX-30]: After using hazard warning…
• 10226814Nov 18, 2022Suspension. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
• 10226889Nov 15, 2022Electrical system, Seats. Some customers may complain that the seat warmer does not operate when turning the ignition on while the seat is warm but when turning the ignition off then on again, the seat warmer begins to operate appropriately. DTCs "B1030:13" and/or "B1032:13" are stored. This is caused by the seat warmer's fail-safe mode which prevents it from working during the initial drive cycle. To correct this issue, the seat warmer has…
• 10226924Nov 14, 2022Electrical system. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the…
• 10226923Nov 14, 2022Visibility (wipers, defrost, mirrors), Electrical system. Some customers may complain the HVAC system not maintaining the correct temperature or the ambient (outside) temperature reading incorrectly. This is caused by a failure in the ambient temperature sensor. To correct this issue, the ambient temperature sensor has been modified.
• 10226826Nov 9, 2022Body and structure. Some vehicles may experience white-streak stains appearing on the front door that look like they seeped out from under the outer mirror base. This is caused by water intruding from gaps of the outer mirror body and/or the hinge of the outer mirror, and corrosion occurring on the aluminum die-cast inner base in the outer mirror. Water, including white-salty corrosion, may drip out from gaps under the outer mirror…
• 10226898Nov 4, 2022Electrical system. Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.
• 10226920Nov 3, 2022Electrical system, Visibility (wipers, defrost, mirrors). Customers may complain about the HVAC system is not blowing air and/or excessive noise from HVAC system.
• 10226916Nov 2, 2022Electrical system. Some customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.
• 10226918Nov 1, 2022Electrical system. Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored.
• 10226896Nov 1, 2022Electrical system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12004 or later). Ver. 7000C0A-NA01_12004 fixes these software errors (bugs): * Album artwork may not appear when playing music using an USB connected iPhone. * The center display may turn black when the gear is shifted from reverse position to parking position. * Screen freezes and…
• 10225779Oct 19, 2022Equipment. Some customers may complain that the rear console lid does not slide smoothly. This may be caused by improperly positioned felt pads attached to the rear console lid lock, which may have moved out of position after repetitive use. The exposed adhesive residue may stick to the rail and disrupt smooth sliding operation. To eliminate this concern, the felt pad positions have been changed.
• 10225776Oct 19, 2022Engine cooling. Some customers may experience the CHECK ENGINE light ON with DTC P0126:00 (Thermostat stuck open) and one or more of the following symptoms: * The engine takes longer to warm up * The engine temperature gauge fluctuates * The low coolant temperature indicator (blue) light stays on longer or comes on while driving * Poor heater performance, especially at idle NOTE: * Vehicles with SKYACTIV-G 2.5T are not applicable.
• 10225767Oct 17, 2022Transmission and drivetrain. The new SKYACTIV-DRIVE FW6A-EL AT uses "Automatic Transmission Fluid (ATF) Type: FZ". Only use "ATF-FZ" to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
• 10225724Oct 17, 2022Body and structure. Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
• 10225763Oct 12, 2022Electrical system. Some customers may complain about the following message displayed in the Multi-Information Display: In the following cases, the MRCC with Stop & Go function system is canceled when the vehicle is traveling at 19 mph (30 km/h) or less: * The Forward Sensing Camera (FSC) cannot detect target objects due to one of the following: - The windshield is dirty - The FSC lens is foggy - There is low visibility due to rain…
• 10225761Oct 12, 2022Electrical system. Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: * C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles] * B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen 7 vehicles built on or before March 2, 2019] * No DTC - Warning Message only [Gen 7…
• 10225778Oct 10, 2022Electrical system. Some customers may complain the A/C blows warm. This may be caused by one of two things. Cause 1: After accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. During a hard acceleration above a certain throttle level opening, the PCM stops the A/C compressor…
• 10225751Oct 10, 2022Engine cooling. Some vehicles equipped with a coolant control valve may exhibit difficulties when refilling the coolant because the control valve is closed and air in the engine cannot escape during ignition ON. Therefore, turn the ignition OFF when refilling engine coolant using the radiator filler neck.
• 10225730Oct 10, 2022Equipment. Mazda Connected Services Frequently Asked Questions (FAQs)
• 10225727Oct 10, 2022Electrical system. Some customers may complain about any of the following: * Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. * Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF * MAZDA CONNECT connected vehicle reception strength icon shows "X" or " "
• 10225774Oct 6, 2022Engine cooling. Some vehicles may exhibit accumulation of dried coolant (1) around the water pipe (2). This is caused by a gap between the housing and pipe due to a press fitting during the manufacturing process. The accumulated coolant is solidified and plugs the gap in high temperature environment and the seepage is stopped and does not progress. This is normal and does not require a part replacement, clean off the dried coolant…
• 10225747Oct 6, 2022Electrical system. Some customers may comlpain about an intermittent Beep sound (popping sound) every 1 ~ 2 minutes while driving. This may be cause by a software error in the navigation SD card.
• 10225781Oct 5, 2022Body and structure. Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the cycles of door operation may result in interference and lead to damage on the rear door garnish. * When the front door glass is closed, the glass run channel may be forced to…
• 10225720Oct 4, 2022Electrical system. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
• 10222563Sep 29, 2022Electrical system. The Blind Spot Monitoring (BSM) system can malfunction with the following symptoms if the rear side radar sensors are installed facing the wrong direction. - BSM system indicates vehicle on the opposite side. - i-ACTIVSENSE indicator ring will not turn green - Rear Cross Traffic Alert (RCTA) does not work - Rear side radar sensor
• 10222565Sep 23, 2022Electrical system. Some customers may complain that after accelerating in hot weather, the A/C blows warm air for a longer time than other models. This is caused by improper control software of the PCM not allowing the A/C compressor to resume properly after acceleration. To eliminate this concern, the control software of the PCM has been modified.
• 10222568Sep 12, 2022Body and structure. Some vehicles may exhibit that the glass run channel of the front door interferes with the rear door garnish. Since the front door glass run channel is not fixed to the door strongly enough for the following situations, cycles of door operation may result in interference and lead to damage on the seal rubber at the rear door. - When the front door glass is closed, the glass run channel may be forced to move to the…
• 10222553Sep 8, 2022Electrical system. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
• 10222544Sep 5, 2022Equipment. Some customers may experience infotainment door rattle noise. Follow the repair procedure to help determine the cause.
• 10222542Sep 5, 2022Body and structure, Equipment. Some customers may experience an infotainment sub-woofer rattle noise. Follow the repair procedure to help determine the cause.
• 10219229Aug 25, 2022Electrical system. Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.
• 10219228Aug 25, 2022Electrical system. Some customers may complain about any of the following: - Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. - Remote function(s) inoperative. - Engine Start / Stop - Door Lock / Unlock - Lights ON / OFF - MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Confirm the customer's phone and vehicle have good to strong…
• 10218766Aug 24, 2022Electrical system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA01_12002 or later).
• 10218777Aug 23, 2022Body and structure. Some customers will report that their fuel door was stuck closed and would not open to refuel the vehicle. Follow the repair steps below unless the conditions outlined in TSB 09-019/21 - FUEL-FILLER LID PANEL IS DEFORMED are present.
• 10218737Aug 23, 2022Electrical system. Some customers may complain about a fuel gauge that fluctuates to a higher level at a stop on inclines, even after a long drive since it was fully refilled. This is caused by improper control software of the body control module (BCM). To eliminate this concern, the control software of the BCM has been modified.
• 10218723Aug 23, 2022Electrical system. Some customers may experience a no start because the battery is discharged after the vehicle is parked for more than 8 hours. This may be caused by one or more of the following, resulting in excessive parasitic draw (dark current) on the battery. 1. The vehicle control system may not have gone to sleep because a key fob was left in the vehicle after the ignition switch was turned off and the doors were closed.
• 10218775Aug 17, 2022Suspension. Some vehicles may exhibit a rattle noise from the front suspension when driving over bumps or on a road with a wavy surface
• 10218772Aug 11, 2022Equipment. This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.
• 10218768Aug 11, 2022Electrical system. Some customers may complain that Mazda Connect does not start or that it takes a long time to restart after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware of the CMU has been improved.
• 10218725Aug 10, 2022Air bags. Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory.
• 10218731Aug 9, 2022Body and structure. Some vehicles may exhibit the glass run channel of the front door interfering with the rear door garnish. This is caused by the front door glass run channel not being fixed strongly enough to the door for the following situations where the cycles of door operation may result in interference and lead to damage on the rear door garnish. - When the front door glass is closed, the glass run channel may be forced to…
• 10218727Aug 8, 2022Latches, locks and linkages. Some CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector.
• 10218730Aug 3, 2022Electrical system. When replacing the body control module (BCM), some ECUs may need reprogramming. Without reprogramming the concerned ECUs, the power saving function may not work properly.
• 10218770Aug 1, 2022Visibility (wipers, defrost, mirrors). Some customers may complain that their interior rear view mirror fell off and/or will not stay in place after it is reinstalled. This is due to some mirrors having lower tension on the retaining clips. To eliminate this concern, there was a change in production
• 10218728Aug 1, 2022Equipment. Some vehicles may exhibit a rear console lid with a sticking feeling or a squeaking noise when opening and/or closing. This is caused by an inappropriate shape of the console lid hinge pin where the position of the hinge pin (1) becomes misaligned when the rear console lid is repeatedly opened and closed. When parts around the hinge pin thermally expand, the result creates a gap in the hinge of the rear console lid.

← All problems reported for the 2019 Mazda MAZDA3