2015 Mazda MAZDA6 Technical Service Bulletins

609 technical service bulletins (TSBs) are on record for the 2015 Mazda MAZDA6. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10098546Sep 8, 2014Equipment. Some vehicles may have the blind spot monitoring (bsm) off indicator light flashing and dtc u3000:54 stored in memory.the concern is caused by inadequate bsm control module control logic. The bsm control module software has been updated to eliminate this concern.
• 10060547Sep 8, 2014Equipment. Summary to be provided on a future date.
• 10098363Aug 29, 2014Visibility (wipers, defrost, mirrors), Body and structure. Some vehicles may exhibit a wind noise from the door window edge(s), while driving. The wind noise is most pronounced at approximately 50 mph (81 km/h) on a smooth road. The wind noise may be caused by air pass-ing through gaps between the door edge and the corresponding body panel.
• 10098362Aug 29, 2014Transmission and drivetrain. Some customers may find it difficult or hard to move the a/t shift lever. When the driver or front passenger’s leg contacts the center console, lateral force (a) may deform the indicator slider (b), causing the slider edge to contact the arched part of the set plate (d). This may cause damage to the indicator slider (b) and/or hard a/t shift lever movement.
• 10060544Aug 29, 2014Body and structure. Summary to be provided on a future date.
• 10098367Aug 15, 2014Equipment. In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:•mazda vehicles are manufactured with tamper-proof speedometers.•when a speedometer is replaced, the new speedometer will read zero (0) miles.•this procedure is extremely important to accurately represent actual vehicle mileage.•prior to speedometer removal, complete the information required on the…
• 10098382Aug 5, 2014Equipment. Some customers may experience the following symptom:a.warning message “I-eloop malfunction” (mazda3) or “I-eloop inspection required” (mazda6) is dis-played in the instrument cluster information display while driving.b.the master warning light and charging system warning light illuminate. C.dtc p1794:00 (capacitor (I-eloop) system: capacitor (I-eloop) malfunction) is stored in pcm memory.
• 10056817Aug 5, 2014Electrical system. Mazda: some vehicles are experiencing an illumination of master warning light and charging system warning light and instrument cluster information displaying, while driving, I-eloop inspection is required. Model 2014-2015 mazda3, mazda6.
• 10098341Jul 16, 2014Wheels. Some vehicles may exhibit a groan type noise from the front wheel hub bearing while driving at high speed or when cornering. This may be caused by front wheel hub bearing corrosion.
• 10098343Jul 14, 2014Equipment. Some vehicles may exhibit one of the following concerns:•hard to shift into 3rd gear•sometimes the shifter may jump out of 3rd gear over a road bump when accelerating after deceleration at 25-40 mph (40-65 km/h)this is caused by the friction coefficient between the 3/4 clutch hub and the sleeve increasing. A surface treat-ment has now been added to the 3/4 clutch hub to decrease the friction coefficient.
• 10059731Jul 14, 2014Engine. Summary to be provided on a future date.
• 10061486Jul 9, 2014Equipment. Summary to be provided on a future date.
• 10061485Jun 20, 2014Visibility (wipers, defrost, mirrors). Summary to be provided on a future date.
• 10098282Jun 10, 2014Equipment. This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. • floor mat moves forward due to improper installation. • inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. • floor mat is…
• 10098245Jun 10, 2014Equipment. Mazda north american operations received many requests from our dealers asking us to approve additional on-car brake lathes as an option for mnao authorized equipment. Due to your feedback and after evaluating a few on-car brake lathes, we are pleased to announce that we have added the pro cut on-car brake lathe to mnao authorized equipment program. The accu-turn is still an approved brake lathe but it is no longer…
• 10098065May 30, 2014Equipment. Some customers may experience an electrical malfunction after a vehicle body repair. The newly painted fender stay (b) may be causing a poor front harness (a) ground connection.
• 10060509May 30, 2014Electrical system. Summary to be provided on a future date.
• 10098122May 20, 2014Equipment. Some customers may experience an electrical malfunction after a vehicle body repair. The newly painted fender stay (b) may be causing a poor front harness (a) ground connection.
• 10098121May 20, 2014Equipment. Some customers may complain that the ambient temperature display is not accurate, or it takes too long for the display to show actual temperature.when you encounter a customer with this concern, first verify the condition when the customer noticed this symptom.
• 10098103May 20, 2014Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10060508May 20, 2014Electrical system. Summary to be provided on a future date.
• 10098145May 6, 2014Equipment. Some customers may experience one of the following two symptoms:1. Symptom (mazda6 only)a.warning message “I-eloop inspection required” is displayed in the instrument cluster information display while driving.b.the master warning light will be illuminated. C.dtc p1794:00 (capacitor (I-eloop) system: capacitor (I-eloop) malfunction) will be stored in pcm mem-ory.
• 10061524May 6, 2014Electrical system. Summary to be provided on a future date.
• 10098165Apr 29, 2014Equipment. Some vehicles may experience the check engine light and automatic transaxle warning light on with dtc p0842, p0847, p0872 and/or p0877 stored in the tcm memory.•p0842:00 - oil pressure switch no. 1 (oil pressure switch b) stuck on•p0847:00 - oil pressure switch no. 2 (oil pressure switch a) stuck on•p0872:00 - oil pressure switch no. 3 (oil pressure switch a) stuck on•p0877:00 - oil pressure switch no.
• 10098164Apr 29, 2014Equipment. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 10.852 or later).• vehicle icon jumps around or vibrates. Caution: do not use the factory reset for retail vehicles. Otherwise, personal settings (such as display and sound adjustments) will be lost, including favorites information.
• 10060503Apr 29, 2014Equipment. Summary to be provided on a future date.
• 10059721Apr 29, 2014Engine. Summary to be provided on a future date.
• 10098203Apr 14, 2014Equipment. Some vehicles may experience the check engine light and automatic transaxle warning light on with dtc p0842, p0847, p0872 and/or p0877 stored in the tcm memory.•p0842:00 - oil pressure switch no. 1 (oil pressure switch b) stuck on•p0847:00 - oil pressure switch no. 2 (oil pressure switch a) stuck on•p0872:00 - oil pressure switch no. 3 (oil pressure switch a) stuck on•p0877:00 - oil pressure switch no.
• 10059720Apr 14, 2014Engine. Summary to be provided on a future date.
• 10098204Apr 9, 2014Equipment. Some vehicles may experience the check engine light and automatic transaxle warning light on with dtc p0842, p0847, p0872 and/or p0877 stored in the tcm memory.•p0842:00 - oil pressure switch no. 1 (oil pressure switch b) stuck on•p0847:00 - oil pressure switch no. 2 (oil pressure switch a) stuck on•p0872:00 - oil pressure switch no. 3 (oil pressure switch a) stuck on•p0877:00 - oil pressure switch no.
• 10059510Apr 9, 2014Transmission and drivetrain. Summary to be provided on a future date.
• 10098208Apr 7, 2014Electrical system. Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (version 10.852 or later).• vehicle icon jumps around or vibrates. Caution: do not use the factory reset for retail vehicles. Otherwise, personal settings (such as display and sound adjustments) will be lost, including favorites information.
• 10060501Apr 7, 2014Equipment. Summary to be provided on a future date.
• 10098030Mar 28, 2014Equipment. Some vehicles may experience the check engine light and automatic transaxle warning light on with dtc p0842, p0847, p0872 and/or p0877 stored in the tcm memory. • p0842:00 - oil pressure switch no. 1 (oil pressure switch b) stuck on • p0847:00 - oil pressure switch no. 2 (oil pressure switch a) stuck on • p0872:00 - oil pressure switch no. 3 (oil pressure switch a) stuck on • p0877:00 - oil pressure switch no.
• 10059723Mar 28, 2014Engine. Summary to be provided on a future date.
• 10098043Mar 25, 2014Equipment. Some vehicles may experience the check engine light and automatic transaxle warning light on with dtc p0842, p0847, p0872 and/or p0877 stored in the tcm memory. • p0842:00 - oil pressure switch no. 1 (oil pressure switch b) stuck on • p0847:00 - oil pressure switch no. 2 (oil pressure switch a) stuck on • p0872:00 - oil pressure switch no. 3 (oil pressure switch a) stuck on • p0877:00 - oil pressure switch no.
• 10059722Mar 25, 2014Engine. Summary to be provided on a future date.
• 10098053Mar 12, 2014Vehicle speed control. Some customers may complain about one of the following symptoms when the vehicle is stopped and the transmission is in d range: • an intermittent high engine idle speed. • an intermittent engagement shock. • an intermittent forward lurch. These conditions may occur when the customer depresses the brake pedal and makes contact with the throttle pedal simultaneously.
• 10061494Mar 12, 2014Engine. Summary to be provided on a future date.
• 10098016Feb 25, 2014Equipment. Some customers may experience one of the following two symptoms: 1. Symptom (mazda6 only) a. Warning message “I-eloop inspection required” is displayed in the instrument cluster information display while driving. B. The master warning light will be illuminated.c. Dtc p1794:00 (capacitor (I-eloop) system: capacitor (I-eloop) malfunction) will be stored in pcm memory.
• 10098012Feb 25, 2014Electrical system. This service information provides basic q-85/t-110 battery handling procedures. Complete service information can be found in ms3 online or workshop manual (section 01-17).
• 10059425Feb 25, 2014Electrical system. Summary to be provided on a future date.
• 10098022Feb 14, 2014Equipment. When replacing the siriusxm satellite radio unit (or a mazda connect tuner and amp unit (tau)) with replacement tuner for any reason, a call must be made to inform siriusxm of the existing radio id and the new/ replacement sat radio id as soon as possible to ensure the customer leaves the dealership with active (working sat radio.
• 10098025Feb 7, 2014Electrical system. This service information provides basic q-85/t-110 battery handling procedures. Complete service information can be found in ms3 online or workshop manual (section 01-17).
• 10098024Feb 7, 2014Equipment. The navigation system support for diagnostics, parts authorization, and parts exchange require contacting the proper source. • tomtom navigation help desk at 866-486-6866 from 7am-11pm (m-f) and 9am-8pm (sat) eastern standard time. Note: one of the first steps for troubleshooting the navigation system is for the customer or dealer to call tomtom. If the tomtom call center cannot solve the customer’s problem, they…
• 10060481Feb 7, 2014Equipment. Summary to be provided on a future date.
• 10098029Feb 4, 2014Equipment. Some customers may experience one of the following two symptoms: 1. Symptom (mazda6 only) a. Warning message “I-eloop inspection required” is displayed in the instrument cluster information display while driving. B. The master warning light will be illuminated.c. Dtc p1794:00 (capacitor (I-eloop) system: capacitor (I-eloop) malfunction) will be stored in pcm memory.
• 10059421Feb 4, 2014Electrical system. Summary to be provided on a future date.
• 10097977Jan 31, 2014Equipment. An updated version of the software for the tomtom navigation system has become available. Under this msp42, the navigation system will be reflashed to the updated version using a sd card.
• 10097978Jan 30, 2014Equipment. An updated version of the software for the tomtom navigation system has become available. Under this msp42, the navigation system will be reflashed to the updated version using a sd card.

← All problems reported for the 2015 Mazda MAZDA6