2008 Mazda MAZDASPEED3Service bulletins
2008 Mazda MAZDASPEED3 Technical Service Bulletins
35 technical service bulletins (TSBs) are on record for the 2008 Mazda MAZDASPEED3. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.
- 11037013Aug 20, 2026Other or unknown. Product Quality Information (PQI) DESCRIPTION Service Information MT-041/12 is no longer valid. It has been unpublished and superseded by the Field Quality Information Report (FQIR) reporting system.
- 11006987Aug 8, 2024Electrical system, Other or unknown. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with…
- 10232299Feb 28, 2023Electrical system. Speedometer replacement procedure
- 10200527Aug 17, 2021Equipment. This service bulletin provides information regarding the proper use of the driverâÂÂs floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.
- 10188016Feb 8, 2021Electrical system. This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
- 10188015Feb 8, 2021Electrical system. The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
- 10186701Jan 26, 2021Equipment. A musty/mildew type odor may come from the vents when the air conditioning (A/C) system is operating. It is most noticeable when the A/C is first turned ON. This odor is the result of mold growth in the A/C evaporator/cooling unit which is caused by condensation, dust, and pollen within the cooling unit. This condition is usually worse during high humidity conditions. âÂÂMazda Air Cooling Coil Coatingâ is…
- 10186703Jan 21, 2021Equipment, Vehicle speed control, Electrical system. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- 10186693Jan 21, 2021Steering, Transmission and drivetrain, Engine cooling, Wheels. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10179228Aug 3, 2020Wheels, Tires. New CARB regulation regarding mandatory checking and documenting of tire pressure whenever a vehicle is in for service work. This applies to all service shops (including Mazda dealerships) in California effective September 1, 2010.
- 10177847Jul 20, 2020Equipment. When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
- 10170661Jan 9, 2020Electrical system, Equipment. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealerâÂÂs responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. ï· Mazda vehicles are…
- 10154879Mar 20, 2019Equipment, Fuel system, Engine cooling. In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
- 10129576Jan 30, 2018Electrical system. Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below.
- 10111036Jul 12, 2017Electrical system. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.
- 10213430Feb 26, 2016Electrical system. Excessive condensation or water within the headlamp assembly caustion
- 10213427Feb 17, 2016Electrical system. HandsFree bluetooth module and/or text messaging troubleshooting procedure
- 10213330Feb 5, 2016Engine cooling, Equipment. PreMixed long life "FL22" Engine Coolant
- 10098367Aug 15, 2014Equipment. In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:mazda vehicles are manufactured with tamper-proof speedometers.when a speedometer is replaced, the new speedometer will read zero (0) miles.this procedure is extremely important to accurately represent actual vehicle mileage.prior to speedometer removal, complete the information required on the…
- 10098003Jan 21, 2014Brakes. Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of the anti-lock brake system (abs). Do not attempt any repairs.
- 10097754Oct 19, 2012Equipment. The multi information display (mid) and navigation system support for diagnostics, parts authorization, and parts exchange require contacting the proper source. Please contact the appropriate source by referring to the following tables.
- 10044209Apr 3, 2012Engine cooling. Mazda: variable timing (vvt) noise and/or timing chain noise. The repair procedure flowchart, repair procedure and warranty information have been revised. Also included model mazdaspeed3 model year 2010
- 10043874Apr 1, 2012Engine cooling. Mazda: see document search button for owner letter. Due to insufficient crank case ventilation, heavy white smoke appears from exhaust pipes, after long idle periods, resulting in oil leakage past exhaust turgine shaft seal. *pe updated 5/14/12. *pe updated 12/18/12.
- 10039251Feb 23, 2012Engine cooling. Mazda: there is a rattle noise from the engine due to a stretched timing chain. *rm updated 4/18/2012.
- 10043662Jan 11, 2012Tires. Mazda: tpms warning light illumindated. This may be caused by damage to the valve nut and/or valve stem of the wheel.
- 10043875Jan 1, 2012Engine cooling. Mazda: see document search button for owner letter. Due to wear on lock pin hole in vvt rotor or breakage of vvt case, loud ticking noise (knocking/rattle) is heard, from timing cover and/or valve (cylinder head) cover, when engine is started after cold condition.
- 10041267Jun 1, 2011Fuel system. Mazda: fuel pump or pressure line pipe installation/removal information.
- 10039250Apr 21, 2011Engine cooling. Mazda: while driving at low speeds or having a long idle there is white/blue smoke from the exhaust pipe. This could be caused by oil problems.
- 10039110Apr 21, 2011Engine cooling. Mazda: 2006-2007 mazda speed6. During long periods of slow speed or idling there may be white/blue smoke coming from the tailpipe. There could be problem with the turbocharger.
- 10034005Oct 15, 2010Fuel system. Mazda: determining evaporative system leak location for dtcs p0441, p0442, p0455, p0455. Some vehicles may have a mil illumination with dtcs stored in memory. *pe updated 4/18/11.
- 10028524Feb 11, 2009Engine cooling. Mazda: vehicles may exhibit a concern of unstable idling or, in some rare cases, stalling, just after the vehicle stops with no dtcs detected. Problem is due to the accumulation of carbon deposits inside the throttle body causing air flow to decrease.
- 10024864Apr 2, 2008Transmission and drivetrain. Rough idle, lack of power, and/or mil on with dtc p2177/p2187 (fuel system lean).
- 10024621Mar 27, 2008Transmission and drivetrain. Rough idle, lack of power, and/or mil on with dtc p2177/p2187 (fuel system lean).
- 10024602Mar 19, 2008Seat belts. Squeak and rattle from seat belt buckle. Vehicles with vin's lower than jm1 bk**** **823850 (produced before sept. 11, 2007).
- 10023313Sep 7, 2007Suspension. Front crankshaft bolt service warning.
← All problems reported for the 2008 Mazda MAZDASPEED3
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 29, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.