2007 Mazda MX-5 Technical Service Bulletins

200 technical service bulletins (TSBs) are on record for the 2007 Mazda MX-5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10136784Apr 5, 2018Air bags. This information is provided to help address Passenger Airbag Deactivation (PAD) Indicator illumination concerns during vehicle service.
• 10136777Apr 2, 2018Transmission and drivetrain, Equipment. Always be sure to use the correct automatic transmission fluid when replacing ATF. Using the wrong ATF may cause shift quality complaints or may even damage the transmission. NOTE: ATF M-V (TYPE M5) IS NOT THE SAME FLUID AS MERCON®V OR MERCON®LV ATF. ATF M-V (TYPE M5) HAS A GREATER VISCOSITY THAN MERCON®V AND MERCON®LV ATF IN LOW TEMPERATURES. ATF M-V (TYPE M5) HAS A GREATER ANTI-JUDDER SPECIFICATION THAN MERCON®V…
• 10136775Apr 2, 2018Engine cooling. Some customers may report a slight clunk/bang/buzz noise or jolt from the front of the vehicle. This concern will most likely occur during the vehicles first forward movement after starting the engine. This is a normal operating noise of the Anti-Lock Brake System (ABS). Do not attempt any repairs. If you encounter a customer complaint for this concern, explain that the noise comes from the ABS/TCS/DSC "Malfunction…
• 10134933Mar 28, 2018Electrical system, Equipment. If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed. Below are a couple of examples of unusual electrical concerns caused by aftermarket devices.
• 10134930Mar 26, 2018Suspension. Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
• 10134929Mar 26, 2018Electrical system. The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.
• 10134928Mar 26, 2018Electrical system. This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.
• 10134703Mar 26, 2018Equipment. This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is…
• 10134702Mar 22, 2018Body and structure. When encountering a vehicle with paint damage, refer to the "Mazda Pocket Paint Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).
• 10134701Mar 22, 2018Exterior lighting. Some customers may complain of condensation/fog inside the front (headlamp/headlight) or rear (taillamp/taillight) combination lights. The recent new models have been fitted with a clear lens which can cause the symptom to be more noticeable, however, it does not affect the performance of the light. This condensation/fog is a natural phenomenon that occurs when there is a fairly large temperature difference between…
• 10134699Mar 22, 2018Equipment. Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
• 10134925Feb 16, 2018Air bags, Equipment. The Workshop Manual has two-different airbag procedures, one for Standard Deployment and one for Two-Step Deployment. Standard Deployment is for Mexico spec vehicles and Two-Step Deployment is for US and Canadian spec vehicles.
• 10129576Jan 30, 2018Electrical system. Some vehicles may have a MIL illumination with DTC's P0441, P0442, P0455, or P0456 stored in memory. To determine the location of the evaporative system leak, follow the repair procedure below.
• 10188488Nov 2, 2017Equipment, Electrical system. If you encounter any type of electrical concern (e.g, dead battery), interview the customer before proceeding with normal Workshop Manual diagnosis. Aftermarket devices may be the cause of the electrical concern. Ask the customer if any aftermarket devices have been installed. Below are a couple of examples of unusual electrical concerns caused by aftermarket devices.
• 10118468Aug 9, 2017Exterior lighting, Body and structure, Electrical system. When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets (including O-ring), seals and covers are present and correctly installed. In most cases you will find that the Bulb Seal No. 1 (A) or HID Bulb Seal No. 1 (B) and Bulb Seal No.
• 10118467Aug 7, 2017Equipment, Electrical system. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with…
• 10111036Jul 12, 2017Electrical system. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is© 2017 Mazda North American Operations, U.S.A. allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.
• 10111011Mar 9, 2017Exterior lighting. Take caution when cleaning plastic headlight lenses. Damage can occur when using some cleaners that contain strong acid, alkaline cleanser or organic solvent. Damage caused by using these cleaners is not covered by Mazda's New Vehicle Limited Warranty term.
• 10092584Aug 26, 2016Engine. There is a concern that some water pumps are being replaced that are not faulty, due to signs of a very small coolant leak from the bleed hole. This service bulletin is to inform you about the water pump sealing mecha-nism and the criteria if replacement is necessary or not.
• 10091610Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10090763Jul 22, 2016Body and structure. When removing parts from a vehicle, take caution of this symbol "r". Failing to replace the non-reusable part may cause a system failure.
• 10085383Jul 8, 2016Electrical system. Ids update 101.00 and 101.02 is now available on ms3 under the "ids/infotainment" tab.
• 10105886Jun 26, 2016Equipment. When dealing with customer complaints of excessive condensation and/or water within the headlamp unit, first determine if all the bulb sockets are resent and correctly installed. In most cases you will find that the bulb seal no. 1 (a) or hid bulb seal no. 1 (b) and bulb seal no.
• 10092724Jun 24, 2016Engine. If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold.
• 10085289Jun 24, 2016Engine. If an engine assembly is replaced after a catastrophic internal mechanical failure, clean the intake manifold internally before installing a replacement engine assembly. If the intake manifold is not cleaned properly, the replacement engine may fail prematurely.metallic debris from the old engine (with catastrophic internal mechanical failure) may rest inside the intake manifold.
• 10092421Apr 28, 2016Electrical system. When reprogramming a control module, always use the gr-8 battery management system power supply mode. If not used, the control module reprogramming may fail due to a weak vehicle battery.the gr-8 battery management system power supply mode prevents the vehicle battery from being discharged. This allows the ids to reprogram a control module without interference from a weak or undercharged vehicle battery.
• 10092413Apr 28, 2016Exterior lighting. Some customers may complain about improper operation of the auto-dimming mirror. This may be caused by an obstruction of the front and/or rear light sensor(s) (e.g. Hanging a parking permit from the mirror). Use a soft cloth with mild detergent to clean the mirror. Harsh detergent may damage the front and/or rear light sensor(s).
• 10185967Mar 30, 2016Electrical system, Equipment. When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another for testing. If swapped, the SD card that is installed into the other vehicle becomes “linked” to the VIN of that vehicle.
• 10185966Mar 30, 2016Other or unknown, Equipment. This article provides HVAC heater/defroster operating tips using Mode selector dial. This includes the use of intermediate positions.
• 10091406Mar 30, 2016Equipment. When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other vehicle becomes “linked” to the vin of that vehicle.
• 10091393Mar 30, 2016Visibility (wipers, defrost, mirrors). This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
• 10091265Mar 30, 2016Equipment. When installing a navigation sd card, confirm that the card is unlocked. Also, mazda does not recommend swapping navigation system sd cards from one vehicle to another for testing. If swapped, the sd card that is installed into the other vehicle becomes “linked” to the vin of that vehicle.
• 10091263Mar 30, 2016Visibility (wipers, defrost, mirrors). This article provides hvac heater/defroster operating tips using mode selector dial. This includes the use of intermediate positions.
• 10185969Mar 24, 2016Equipment. Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
• 10185968Mar 24, 2016Electrical system, Equipment. Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
• 10091433Mar 24, 2016Equipment. Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device
• 10091361Mar 24, 2016Equipment. Some customers may complain about a rattle type noise coming from the rear of the vehicle when driving on rough roads. This may be caused by a loose spare tire jack.
• 10091266Mar 24, 2016Equipment. Some customers may complain about a blurry rear view monitor display. This may be caused by an aftermarket accessory device.
• 10185949Mar 17, 2016Transmission and drivetrain. Some vehicles may exhibit a whining noise from the rear differential when driving. The concern may be caused by improper tooth contact pattern of the rear differential gear from abnormal wear. This abnormal wear is caused by gear tooth lapping compound (used during the production) being left on beyond the allowable amount. The production control has been improved to reduce the amount of remaining lapping compound.
• 10101085Mar 17, 2016Transmission and drivetrain. Some vehicles may exhibit a whining noise from the rear differential when driving.the concern may be caused by improper tooth contact pattern of the rear differential gear from abnormal wear. This abnormal wear is caused by gear tooth lapping compound (used during the production) being left on beyond the allowable amount. The production control has been improved to reduce the amount of remaining lapping compound.
• 10090841Mar 17, 2016Transmission and drivetrain. Some vehicles may exhibit a whining noise from the rear differential when driving.the concern may be caused by improper tooth contact pattern of the rear differential gear from abnormal wear. This abnormal wear is caused by gear tooth lapping compound (used during the production) being left on beyond the allowable amount. The production control has been improved to reduce the amount of remaining lapping compound.
• 10185904Mar 7, 2016Steering. Some customers may complain that the steering wheel is off center more than 3" even when driving straight on a flat road.
• 10101062Mar 7, 2016Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10090812Mar 7, 2016Steering. Some customers may complain that the steering wheel is off center more than 3° even when driving straight on a flat road.
• 10213430Feb 26, 2016Electrical system. Excessive condensation or water within the headlamp assembly caustion
• 10213326Feb 26, 2016Equipment. Mazda guidelines for factory scheduled maintenance
• 10105891Feb 26, 2016Brakes. Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
• 10213333Feb 15, 2016Electrical system, Equipment. Battery test procedure requirements using the GR81291
• 10213329Feb 5, 2016Electrical system, Engine cooling. Engine Start /Stop Procedure with room fuse removed
• 10213422Feb 2, 2016Equipment. Proper usage of driver's floor mat.

← All problems reported for the 2007 Mazda MX-5