2016 Nissan Maxima Technical Service Bulletins

278 technical service bulletins (TSBs) are on record for the 2016 Nissan Maxima. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10192741Feb 19, 2016Visibility (wipers, defrost, mirrors). SERVICE INFORMATION When working on the Moonroof, several items can be replaced, repaired, or adjusted, without the need to replace the entire Moonroof assembly. Refer to the following procedures in this bulletin, as needed, to help resolve Moonroof issues. * Knock Insert (Knock) Replacement (Page 2) * Wind Deflector Replacement (Page 7) For wind deflector being damaged, scratched, or having a broken clip.
• 10192736Feb 10, 2016Equipment, Forward collision avoidance. SERVICE INFORMATION When diagnosing the front sonar parking sensor for unwanted activation (e.g. sonar activates with no obstacle ahead), inspect the front license plate, front license plate frame and if equipped, the front license plate bracket. See page 2 for example photos.
• 10192727Jan 28, 2016Visibility (wipers, defrost, mirrors). SERVICE INFORMATION The purpose of this bulletin is to give Nissan dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due…
• 10192724Jan 21, 2016Electrical system. SERVICE INFORMATION Combination Meter Self-Learning After Replacement 2015 Murano Combination Meters have a learning function when first installed. IMPORTANT: Immediately after initial installation and ignition ON, the combination meter adapts to the way the vehicle is equipped. Performing self-learning can be done only once. Once done, it cannot be changed.
• 10192720Jan 15, 2016Electrical system. SERVICE INFORMATION The function to detect the last item to trigger the vehicles theft alarm system can now be accessed with CONSULT-III plus (C-III plus). This function can be accessed by selecting: * Diagnosis (All Systems) or Diagnosis (One System). Then * BCM Then * THEFT ALM Then * Work Support Then * THEFT ALM TRG. See this bulletin for further details.
• 10192717Jan 4, 2016Electrical system. SERVICE INFORMATION Whenever all Intelligent Keys of an APPLIED VEHICLE are lost AND the BCM is in Transit Mode, the BCM does not need to be replaced when replacing the lost Intelligent Keys. When all of the following conditions of an APPLIED VEHICLE are verified: - The BCM is in Transit Mode. - The BCM will not respond to CONSULT-III plus (C-III plus). It does not show up on System Call. - All Intelligent Keys are…
• 10192714Jan 4, 2016Electrical system. SERVICE INFORMATION When the BCM in an APPLIED VEHICLE is being replaced for any reason, all existing Intelligent Keys must be re-registered. If new Intelligent Keys are added to the existing Intelligent Keys at the same time the BCM is being replaced, the procedure in this bulletin must be followed. See this bulletin for further detail.
• 10192708Dec 17, 2015Latches, locks and linkages. This activity will expire on December 18th, 2015. Dealers can continue to schedule and repair vehicles eligible for this service action until close of business December 18th, 2015. Claims will be honored for RO?s opened on or before the 18th of December.
• 10192707Dec 17, 2015Electrical system. SERVICE INFORMATION The Intelligent Keys used on the various Nissan vehicles may not be interchangeable between models and years. See this bulletin for further detail.
• 10192702Dec 16, 2015Latches, locks and linkages. Nissan is conducting a dealer inventory service action to inspect and, if necessary, replace the hood latch on certain MY 2015 Murano, MY2016 Maxima, and MY2015-16 Rogue and Pathfinder vehicles
• 10192688Nov 23, 2015Engine cooling. Nissan is conducting a Voluntary Emission Service Campaign to provide a warranty supplement card that contains the most current emission warranty information.
• 10192687Nov 20, 2015Electrical system. SERVICE INFORMATION Design and process changes have been made to improve battery voltage at dealer receipt. Our goal is to deliver vehicles to customers with a 12 volt battery in excellent condition. Proper dealership storage and maintenance of vehicle 12 volt batteries is essential to insuring good battery operating life and customer satisfaction. Dealers are responsible for maintaining vehicles in their inventory.
• 10192686Nov 18, 2015Engine cooling. Nissan is conducting a Voluntary Emission Service Campaign to provide a warranty supplement card that contains the most current emission warranty information.
• 10192679Nov 16, 2015Visibility (wipers, defrost, mirrors). SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be…
• 10192677Nov 16, 2015Visibility (wipers, defrost, mirrors). SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulletin for further details.
• 10192674Nov 12, 2015Equipment. SERVICE INFORMATION Please share this bulletin with "sales staff" and staff associated with maintaining dealer stock vehicles. If an SD Map Card is removed from a Navigation/audio unit for any reason, the card MUST be returned to only the Navigation/audio unit that it came out of. SD Map Cards have data on them that is specific to the Navigation/audio unit that they are originally from, and may cause operational…
• 10192650Oct 8, 2015Electrical system, Equipment. IF YOU CONFIRM The customer states HomeLink will not operate or has improper operation. ACTIONS 1. To significantly reduce unnecessary repairs, make sure: a. The vehicle is not in "Transit Mode" (if equipped). - Not in Transit Mode: With the turn signal switch is in the OFF (center) position, turn the ignition from OFF to ON. If the turn signal indicators stay OFF (do not illuminate), the vehicle is not in Transit…
• 10192638Sep 15, 2015Back-over prevention (rear camera), Wheels, Brakes, Lane departure. SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with…
• 10192624Aug 12, 2015Equipment. SERVICE INFORMATION On applied vehicles equipped with a rear spoiler, there are two different types. To determine which rear spoiler belongs on your vehicle, see both pages of this bulletin. See this bulletin for further detail.
• 10192615Aug 6, 2015Transmission and drivetrain. SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired (whether under warranty or customer pay) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair.
• 10192607Jul 15, 2015Equipment. Effective immediately, Nissan is placing a temporary Quality Assurance (QA) Hold on 2,823 MY 2016 Maxima vehicles in transit or currently at the dealer. Nissan is currently investigating the issue requiring this quality hold.
• 10192606Jul 15, 2015Equipment. SERVICE INFORMATION If after replacing a BCM and manual configuration needs to be performed, use the table below: CAUTION: * Thoroughly read and understand the vehicle specification. ECU control may not operate normally if the setting is not correct. * Never select any other value other than the ?Setting value? shown below. * If only 1 item is present in the Setting value, only 1 choice is available for the…
• 10192600Jul 6, 2015Equipment. SERVICE INFORMATION If the AV control unit needs to be replaced in an Applied Vehicle for any reason, follow the Service Procedure in this bulletin to make sure all necessary configurations and registration are completed correctly. NOTE: - The Apps mode will not function if the AV control unit registration code is not registered. - Do not remove the SD Map Card when returning the Navi/audio head unit for parts…
• 10192597Jul 6, 2015Equipment, Back-over prevention (rear camera), Steering, Brakes, Wheels. SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty.
• 10192591Jun 24, 2015Engine cooling. SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for…
• 10192580Jun 12, 2015Equipment. SERVICE INFORMATION When replacing both of the vehicle?s I-Keys, due to being lost prior to vehicle delivery, new I-Keys can now be registered without the BCM (or ECM) being replaced. Do not replace the BCM (or ECM) before replacing I-Keys for the Applied Vehicles. Please see this bulletin for further details.
• 10192574May 7, 2015Wheels. SERVICE INFORMATION The appearance of painted alloy wheels can be damaged if acidic cleaners are used. DO NOT use Chrome Wheel Cleaner on Painted Wheels. Many chrome wheel cleaners have acidic ingredients. Make sure to follow all instruction in the Appearance and Care Section of the Owner?s Manual. Damage to wheel appearance due to the use of inappropriate chemicals or cleaning products is not covered under…
• 10192354Apr 29, 2014Electrical system. SERVICE INFORMATION Warranty claims coding for repairing wiring harnesses for all Nissan vehicles has changed. This bulletin gives an outline of the technician?s responsibilities in assisting the dealer?s claims administrator to properly code a harness repair. Failure to provide correct information may result in claims suspension or rejection. See this bulletin for further detail.

← All problems reported for the 2016 Nissan Maxima