Skip to content
Recall campaign96V239000

Recall 96V239000: 1996–1997 International Harvester 3800

Vehicle speed control › Accelerator pedal
Report received
Nov 27, 1996
Manufacturer
International truck and engine
Potentially affected
727vehicles
Model years
1996–1997

Check your own vehicle. A recall applies only to vehicles within the affected build range. Enter your VIN at nhtsa.gov/recalls. Recall repairs are free at a franchised dealer.

What NHTSA recorded

Vehicle description: school buses equipped with the international i6 electronic engine and an extra thick bus body floor. The accelerator pedal to floor clearance is approximately 1.2 inches with a standard bus body floor. However, some customers ordered an additional 3/4 inch thick floor and extra thick floor mats to serve as insulation in cold climates. When this extra flooring is used, the bottom edge of the accelerator pedal, when depressed, can come in contact with the floor.

Possible consequence

Should the accelerator pedal contact the floor, the pedal could get caught and not return to the idle position increasing the risk of a vehicle accident.

Remedy

Dealers will inspect the flooring on these buses to insure there is a minimum of 1/4 inch clearance. On buses with less than 1/4 inch clearance, the dealer will remove the pedal and cut off the bottom of the pad to obtain the proper clearance.

Affected model years

Pages for each model year show complaints, parts, mileage and other recalls.

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 28, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.