2014 Stallion 900 Seats Problems
- Complaints
- 7about this part
- Share
- 22%of 32 total for the year
- Median mileage
- 4,012miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 7 complaints about the seats of the 2014 Stallion 900, 22% of the 32 complaints for this model year. Where a mileage was given, the median is 4,012 miles.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“Drivers seat was allowed to go too far back & is located too low when adjusting seat it was going back it was cutting all air lines & wiring, height adjust mechanism is inoperable consistent wipe issues, continuously had to reset inverters & replace 24 volt relays (made us remove 2 pieces from circuit board d4+r9) continuously replacing fog light bulbs”
NHTSA complaint #10631044, filed 2014-09, 2,300 miles“Driver's seat was allowed to go too far back & is located too low when adjusting seat it was going back it was cutting all air lines & wiring, height adjust mechanism is inoperable (had to install a screw to keep it steady) consistent wipe issues, continuously had to reset inverters & replace 24 volt relays (made us remove 2 pieces from circuit board d4+r9)”
NHTSA complaint #10631041, filed 2014-09, 2,499 miles“?constantly replacing fog light bulbs ?consistent wipe issues, continuously had to reset inverters & replace 24 volt relays (made us remove 2 pieces from circuit board d4+r9) ?driver?s seat was allowed to go too far back & is located too low when adjusting seat it was going back it was cutting all air lines & wiring, height adjust mechanism is inoperable (had to install a screw to keep it steady).”
NHTSA complaint #10632428, filed 2014-09, 9,146 miles“?driver seat belts get stuck only retract sometimes / belt cover causes belt to be inoperable (replaced with aftermarket belts) ?consistent wipe issues, continuously had to reset inverters & replace 24 volt relays (made us remove 2 pieces from circuit board d4+r9) ?driver's seat was allowed to go too far back & is located too low when adjusting seat it was going back it was cutting all air lines & wiring, height adjust mechanism is inoperable.”
NHTSA complaint #10631019, filed 2014-09, 4,334 miles“?driver's seat was allowed to go too far back & is located too low when adjusting seat it was going back it was cutting all air lines & wiring, height adjust mechanism is inoperable (had to install a screw to keep it steady) ?driver seat belts get stuck only retract sometimes / belt cover causes belt to be inoperable (replaced with aftermarket belts) ?consistent wipe issues, continuously had to reset inverters & replace 24 volt relays (made us remove 2 pieces from circuit board d4+r9).”
NHTSA complaint #10631028, filed 2014-09, 3,691 milesSeats: other model years
| Year | Complaints | Share of year |
|---|---|---|
| 2014 | 7 | 22% |
Other parts of the 2014 Stallion 900
13 complaintsEquipment
12 complaintsBody and structure
12 complaintsVisibility (wipers, defrost, mirrors)
11 complaintsSeat belts
10 complaintsElectrical system
2 complaintsEngine cooling
1 complaints
← All problems reported for the 2014 Stallion 900
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 29, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology