2014 Subaru BRZ Technical Service Bulletins

248 technical service bulletins (TSBs) are on record for the 2014 Subaru BRZ. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10202810Oct 7, 2021Equipment, Engine cooling. This bulletin announces an additional service procedure for timing chain and / or cam sprocket replacement on FA and FB type engines.
• 10201813Sep 29, 2021Wheels. This bulletin announces a change made to the wheel lug nuts.
• 10201042Aug 23, 2021Equipment. This bulletin provides a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
• 10198758Jun 17, 2021Electrical system, Equipment. This bulletin contains additional information for recommended materials listed in the Service Manuals for individual models
• 10198749Jun 7, 2021Equipment, Engine cooling. This bulletin is to advise of SOA’s revised catalytic converter recycling program shipping procedure.
• 10198741Jun 1, 2021Engine cooling. This bulletin outlines changes in the service procedure for engine oil pressure inspection.
• 10194844May 18, 2021Equipment. Description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
• 10188198Feb 25, 2021Equipment, Body and structure. This bulletin announces a design change made to the replacement front console box cover.
• 10187315Feb 1, 2021Equipment. To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
• 10187309Feb 1, 2021Engine cooling, Electrical system. This Service Information Bulletin announces design changes made to the ignition coil and engine wiring harness in response to a limited number of cases related to the ignition coil primary / secondary DTCs listed.
• 10186346Jan 22, 2021Engine cooling. The purpose of this bulletin is to provide procedures for the diagnosis and repair of oil seepage which may be coming from the areas listed.
• 10186348Jan 4, 2021Equipment, Electrical system. The purpose of this bulletin is to provide replacement key and immobilizer information.
• 10185090Dec 15, 2020Wheels. This Service Information Bulletin announces a change made to the wheel lug nuts.
• 10182247Oct 29, 2020Equipment. The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
• 10182187Oct 2, 2020Equipment. The purpose of this bulletin is to provide a desription of current changes to service manuals available via the Subaru Technical Information System (STIS) web site.
• 10180733Sep 18, 2020Equipment. This bulletin provides a description of current changes to Service Manuals.
• 10179378Aug 4, 2020Equipment. Special Service Tools Cross Reference List.
• 10176028May 26, 2020Brakes. This service Information bulletin provides precautions to follow when servicing the Brembo brake calipers utilized on the models listed. Because of their aluminum construction, it is critcal to take extra care when servicing.
• 10174543Apr 30, 2020Equipment. All Models (Vehicle Cleaning- COVID-19Best Practices)
• 10173127Mar 19, 2020Electrical system, Air bags, Equipment. This bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
• 10173027Mar 3, 2020Equipment, Engine cooling, Electrical system. The purpose of this bulletin is to provide a description of current changes to Service Manuals available via the Subaru Technical Information System (STIS) web site.
• 10171101Jan 31, 2020Brakes, Electrical system. This bulletin announces availability of a new stop lamp switch for the models listed above equipped with LED - type rear combination lamps.
• 10171089Jan 17, 2020Equipment, Electrical system, Air bags. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
• 10171084Jan 10, 2020Electrical system, Equipment. The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site.
• 10165509Sep 20, 2019Engine cooling. The purpose of this Bulletin is to provide procedures for the diagnosis and repair of oil seepage which may be coming from the areas listed below: There are six areas that should be closely inspected if an oil leak is reported by the customer: 1. The 6mm tapped hole casting boss area in the left-hand camshaft cap 2. The sealing surfaces between the camshaft carrier and cylinder head 3. The sealing surface between…
• 10164447Aug 29, 2019Body and structure. This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. This change will prevent them from contacting each other and possibly damaging their painted surfaces.
• 10163533Jul 22, 2019Electrical system, Equipment. This bulletin announces availability of individual service parts and provides an installation procedure for the A/C compressor clutch assembly. Previously, a complete compressor assembly was necessary if any of the clutch components required replacement.
• 10163525Jul 11, 2019Brakes. This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the…
• 10163017Jun 27, 2019Engine. This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.
• 10163006Jun 13, 2019Body and structure. This bulletin announces availability of a new retaining plate and installation method to address gapping conditions which may develop between the front bumper cover and fender.
• 10161824May 21, 2019Equipment. Subaru Service and Technical Support Line Newletter.
• 10161823May 20, 2019Fuel system, Equipment. This bulletin provides an additional service procedure for replacing the pulsation dampers located on both low-pressure fuel delivery pipes as shown in the illustration below. Although the BRZ Service Manual does not currently show the dampers and the required replacement seals as separate components, the Electronic Parts Catalog (EPC) does provide exploded view and individual part number ordering information.
• 10161813May 6, 2019Equipment. To help reduce confusion and increase technician efficiency, Subaru of America, Inc. (SOA) has developed the following cross reference list to help locate the appropriate Special Service Tool.
• 10160214Apr 23, 2019Electrical system, Engine. This bulletin announces part information for new Active Valve Control System (AVCS) oil control solenoid valves (OCV) which contain a redesigned internal oil seal. The new seal will eliminate potential oil seepage into the wire harness connector portion of the valve. If oil seeps into the connector, over time, the Check Engine lamp may illuminate and set various AVCS-related DTCs.
• 10160490Mar 8, 2019Engine cooling, Equipment. This Service Information bulletin provides new inspection and repair procedures for AVCS (Active Valve Control System) -related DTCs on the FA and FB engine equipped models listed above. The applicable Service Manuals will be revised with this new information in the near future.
• 10155225Feb 22, 2019Equipment. This Service Information bulletin announces a design change made to the rubber timing hole access plug to improve its retention and prevent water intrusion into the converter case.
• 10154424Jan 31, 2019Equipment, Engine. The purpose of this bulletin is to clarify the proper installation direction of the valve springs used on the FA engine. The springs have a light blue paint mark identifier as shown in the chart below.
• 10154419Jan 25, 2019Brakes. This Service Information bulletin announces instruction for application of additional lubrication between the brake caliper support and pad clips. This will prevent the pad from dragging due to corrosion buildup which may result in uneven or premature wear of the replacement brake pads. This additional instruction applies to all models with brake pads using the upper and lower pad clips and has been added to the…
• 10154207Jan 10, 2019Equipment, Air bags. This Bulletin provides information regarding Event Data Recorder (EDR) functionality which has been incorporated into the airbag system.
• 10153614Dec 10, 2018Engine, Fuel system. This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. Some vehicles may have components which in combination with certain fuel temperatures and / or formulations, may result in aeration of the fuel within the body of the pump and…
• 10153209Nov 16, 2018Engine, Fuel system. This bulletin provides a procedure to address customer concerns of a high-pitched ?chirp?, ?squeak? or ?cricket? sound heard coming from the engine?s Direct Injection (DI) high-pressure fuel pump. Not all DI pumps may exhibit this sound. Some vehicles may have components which in combination with certain fuel temperatures and / or formulations, may result in aeration of the fuel within the body of the pump and…
• 10153187Nov 14, 2018Engine. This Service Information Bulletin announces design changes to the engine?s knock sensor which will help improve vehicle assembly line efficiency and increase durability. In some cases, the Check Engine light may illuminate and a knock sensor-related DTC set in the ECM memory: P0327, P0328, P0332 and P0333. The knock sensor for DIT engines is now utilized for NA engines to improve durability and resistance to heat.
• 10150932Oct 9, 2018Latches, locks and linkages, Body and structure. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just…
• 10150887Oct 9, 2018Electrical system, Body and structure. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just…
• 10146480Sep 18, 2018Exterior lighting. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted (or faulty) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.
• 10145074Aug 24, 2018Body and structure. This bulletin announces a design change made to the rear bumper cover (face). To insure a proper fit of the new cover, the rear edge portion of the existing inner mud guards (splash shields) will need to be modified slightly in specific areas. In addition, plastic arch caps (plugs) are inserted into unused holes in the rear wheel arch lip of the new cover to fill unused mounting holes for optional accessory mud…
• 10143872Jul 31, 2018Suspension. This bulletin announces a change made to the front lower control arm ball joint boots. The boot material has been changed to provide increased resistance to damage from ozone.
• 10141487May 30, 2018Engine cooling, Equipment. This Service Information bulletin announces a change to the flywheel (pilot) bearing to a ?environmentally friendly? type which is compliant with the REACH (Registration, Evaluation, Authorization and restriction of CHemicals) guidelines being used in the European Union (EU). This change is not intended to address any specific customer concern.
• 10140485Feb 13, 2018Body and structure, Equipment. This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to…
• 10140470Feb 13, 2018Equipment, Body and structure. This bulletin announces a design change to the air vent grille located in the lower portion of the trunk (or cargo) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame (case) portion and not close properly allowing outside air / odor to…

← All problems reported for the 2014 Subaru BRZ