2008 Audi A5 Technical Service Bulletins

487 technical service bulletins (TSBs) are on record for the 2008 Audi A5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10243767Dec 16, 2013Equipment. Audi Elsa Newsletter
• 10121410Dec 13, 2013Steering. The customer states that the steering feels stiff during turning. The condition occurs when the vehicle is stationary. The steering shaft needs to be updated.
• 10054863Dec 13, 2013Steering. Audi: when vehicle is stationary, the steering will feel still when turning and the steering shaft needs to be updated with improved intermediate steering shaft. Model 2009-2014 a4, a5, a5 cab, q5.
• 10251027Dec 9, 2013Wheels. Tightening wheel bolts
• 10121408Dec 9, 2013Wheels. Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as…
• 10054859Dec 9, 2013Equipment. Audi: on certain vehicles, use calibrated torque wrench and not torque sticks, torque extension bars and impact guns/wrenches not approved for usage on wheel bolts by manufacturer, that can cause damage to brake, steering wheel, hub. Model 1995-2014 all.
• 10251002Dec 3, 2013Suspension. Rattling/knocking noise from front end over bumps
• 10250661Dec 3, 2013Suspension. Rattling/knocking noise from front end over bumps
• 10121406Dec 3, 2013Suspension, Brakes. The customer reports hearing a rattling or knocking noise when the car is driven over bumps or uneven road surfaces. The noise is noticed after the car has been driven for a while and is warmed-up, and when the temperature outside is warm. The condition can be duplicated if the brakes are applied while the car is driven over bumps. High ambient temperatures at the hydraulic guide links cause the noise.
• 10204501Nov 27, 2013Engine cooling. 90 "Ignition lock faulty" message in cluster information display.
• 10121509Nov 27, 2013Electrical system. "Ignition lock faulty" message is displayed in the driver information display with the symbol shown at right. DTCs are stored in the comfort system central control unit. The "ignition lock faulty" message can be triggered by many different DTC entries. Presence of the message does not indicate that the ignition switch is faulty; the message typically has a different root cause. Replacing the ignition switch before…
• 10204498Nov 26, 2013Body and structure. Components on the doors or the parcel shelf vibrate while heavy bass audio is played.
• 10121506Nov 26, 2013Body and structure, Equipment. Supersedes Technical Service Bulletin Group 57 number 12-70 dated September 5, 2012. Vibration noises from the doors or the rear parcel shelf are heard, particularly when heavy bass audio is playing. Components on the doors or the parcel shelf vibrate while heavy bass audio is played.
• 10204517Nov 25, 2013Equipment. Elso pro reminder.
• 10251025Nov 21, 2013Steering. Steering wheel shimmy, vibration and/or oscillation
• 10204491Nov 21, 2013Brakes. Brakes on vehicles produced before September 3, 2012 (calendar week 36 of 2012), squeak or squeal
• 10204489Nov 21, 2013Suspension, Steering, Tires, Wheels. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
• 10121499Nov 21, 2013Brakes. Supersedes Technical Service Bulletin Group 46 number 13-51 dated July 30, 2013. Brakes on vehicles produced before September 3, 2012 (calendar week 36 of 2012), squeak or squeal when used with light to moderate force.
• 10121497Nov 21, 2013Steering, Suspension. Supersedes Technical Service Bulletin Group 44 number 13-42 dated September 27, 2013. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 - 80 mph (88 - 128 km/h). This bulletin is not applicable if this vehicle has a Repair…
• 10212675Nov 15, 2013Engine cooling. Fault stored in access start authorization control unit
• 10210623Nov 15, 2013Seat belts, Steering. Before a replacement electronic steering column lock control unit, J764, is installed, the software of the access start authorization control unit, J393, must be updated due to a diagnostic software error that prevents the DTC from being cleared.
• 10204486Nov 15, 2013Electrical system, Steering. Before a replacement electronic steering column lock control unit, J764, is installed, the software
• 10121494Nov 15, 2013Steering. Supersedes Technical Service Bulletin Group 96 number 12-28 dated January 27, 2012. DTC is present in the access start authorization control unit, J393 (address word 05), and cannot be cleared. The original electronic steering column lock control unit, J764, is installed. The original control unit has never been replaced. A replacement electronic steering column lock control unit, J764, has been installed.
• 10066822Nov 15, 2013Steering. Summary to be provided on a future date.
• 10243770Nov 11, 2013Equipment. Audi Elsa Newsletter
• 10204515Nov 11, 2013Equipment. ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
• 10204503Nov 6, 2013Equipment. The navigation DVD or other CD/DVD cannot be ejected.
• 10121511Nov 6, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during…
• 10204514Nov 4, 2013Equipment. Several weeks ago, the ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
• 10121311Oct 29, 2013Electrical system. Supersedes Technical Service Bulletin Group 57 number 13-92 dated August 1, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
• 10121987Oct 23, 2013Engine, Equipment. This document contains the Audi oil capacity chart.
• 10243775Oct 21, 2013Equipment. Audi Elsa Newsletter
• 10121316Oct 21, 2013Electrical system, Air bags. Supersedes Technical Service Bulletin Group 69 number 12-25 dated April 25, 2012. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model?s SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the…
• 10212668Oct 7, 2013Electrical system. Low battery charge: excess current draw location
• 10121306Oct 7, 2013Electrical system. Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
• 10210615Oct 4, 2013Equipment. Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367). When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging takes place at the jumper posts in the engine compartment. This is due to the added resistance in the system between the battery and jumper posts.
• 10121305Oct 4, 2013Electrical system. Supersedes Technical Service Bulletin Group 27 number 12-10 dated February 13, 2012. Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367). When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging takes place at the jumper posts in the engine compartment. This is due to the added…
• 10121945Oct 2, 2013Equipment, Body and structure. Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
• 10243918Oct 1, 2013Fuel system, Other or unknown. Audi Oil Capacity Chart
• 10121338Sep 27, 2013Suspension, Steering. Supersedes Technical Service Bulletin Group 44 number 13-36 dated February 18, 2013. This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration in one or both of the following…
• 10121345Sep 25, 2013Equipment. Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.
• 10250999Sep 23, 2013Suspension. Shock absorber leaks: assessment aid
• 10250658Sep 23, 2013Back-over prevention (rear camera), Body and structure. Shock absorber leaks: assessment aid
• 10121365Sep 23, 2013Equipment. Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
• 10121331Sep 23, 2013Suspension. Supersedes Technical Service Bulletin Group 40 number 10-04 dated April 1, 2010. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber. As a result of a leak because the shock absorber is damaged. As a result of residue from when the shock was filled during production, or of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
• 10243780Sep 16, 2013Equipment. Audi Elsa Newsletter
• 10121342Sep 13, 2013Wheels, Steering. Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have…
• 10121367Sep 11, 2013Electrical system. Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
• 10121363Sep 10, 2013Engine cooling. Supersedes Technical Service Bulletin Group 87 number 13-41 dated May 30, 2013. Moisture in the driver or front passenger foot well. Due to a faulty and/or incorrectly installed condensation drain hose, condensation from the evaporator could enter the front foot well areas through a gap between the body and the sealing surface of the drain hose.
• 10121324Sep 5, 2013Engine cooling. Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds…

← All problems reported for the 2008 Audi A5