2010 Audi A5 Technical Service Bulletins

892 technical service bulletins (TSBs) are on record for the 2010 Audi A5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10204491Nov 21, 2013Brakes. Brakes on vehicles produced before September 3, 2012 (calendar week 36 of 2012), squeak or squeal
• 10204489Nov 21, 2013Suspension, Steering, Tires, Wheels. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
• 10121499Nov 21, 2013Brakes. Supersedes Technical Service Bulletin Group 46 number 13-51 dated July 30, 2013. Brakes on vehicles produced before September 3, 2012 (calendar week 36 of 2012), squeak or squeal when used with light to moderate force.
• 10121497Nov 21, 2013Steering, Suspension. Supersedes Technical Service Bulletin Group 44 number 13-42 dated September 27, 2013. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 - 80 mph (88 - 128 km/h). This bulletin is not applicable if this vehicle has a Repair…
• 10204516Nov 18, 2013Visibility (wipers, defrost, mirrors). Wind noise from Exterior Mirror.
• 10212675Nov 15, 2013Engine cooling. Fault stored in access start authorization control unit
• 10210623Nov 15, 2013Seat belts, Steering. Before a replacement electronic steering column lock control unit, J764, is installed, the software of the access start authorization control unit, J393, must be updated due to a diagnostic software error that prevents the DTC from being cleared.
• 10204486Nov 15, 2013Electrical system, Steering. Before a replacement electronic steering column lock control unit, J764, is installed, the software
• 10121494Nov 15, 2013Steering. Supersedes Technical Service Bulletin Group 96 number 12-28 dated January 27, 2012. DTC is present in the access start authorization control unit, J393 (address word 05), and cannot be cleared. The original electronic steering column lock control unit, J764, is installed. The original control unit has never been replaced. A replacement electronic steering column lock control unit, J764, has been installed.
• 10066822Nov 15, 2013Steering. Summary to be provided on a future date.
• 10205713Nov 13, 2013Electrical system. Update Bulletin
• 10203526Nov 13, 2013Equipment. Update Bulletin
• 10243770Nov 11, 2013Equipment. Audi Elsa Newsletter
• 10204515Nov 11, 2013Equipment. ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
• 10216667Nov 7, 2013Fuel system. The leak can be traced to the connection of the water pump and the hose leading to the heater core (Figure 1). The seal ring is not the cause of the leak.
• 10204482Nov 7, 2013Engine cooling. Customer may report coolant leaking from the engine area.
• 10121490Nov 7, 2013Engine cooling. Supersedes Technical Service Bulletin Group 19 number 13-44 dated July 18, 2013. Customer may report coolant leaking from the engine area. The leak can be traced to the connection of the water pump and the hose leading to the heater core. The seal ring is not the cause of the leak.
• 10204503Nov 6, 2013Equipment. The navigation DVD or other CD/DVD cannot be ejected.
• 10121511Nov 6, 2013Equipment. Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during…
• 10204514Nov 4, 2013Equipment. Several weeks ago, the ODIS Quick Reference Guide was sent to all dealer technicians (non-corporate
• 10250176Nov 1, 2013Electrical system. Ignition Coils
• 10214978Nov 1, 2013Electrical system. UPDATE Ignition Coils.
• 10121521Nov 1, 2013Engine, Electrical system. This communication is to inform you of upcoming Update 28G6. There are 79,232 Audi vehicles affected in the U.S. by this Update. Rough idle or reduced driving power and, in turn, an illuminated Malfunction Indicator Lamp (MIL) on the instrument cluster due to the presence of specific fault codes caused by this component. Inspect and replace ignition coils as required.
• 10121479Nov 1, 2013Equipment. Rough idle or reduced driving power and, in turn, an illuminated Malfunction Indicator Lamp (MIL) on the instrument cluster due to the presence of specific fault codes caused by this component. This Update is in effect until removed. Procedure is valid only for vehicles that show the 28G6 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited…
• 10121311Oct 29, 2013Electrical system. Supersedes Technical Service Bulletin Group 57 number 13-92 dated August 1, 2013. The customer inquires about the operation of the vehicle locking, and may suggest that the vehicle ?locked itself?. The lock command history is stored in the convenience system control module (J393).
• 10121987Oct 23, 2013Engine, Equipment. This document contains the Audi oil capacity chart.
• 10243775Oct 21, 2013Equipment. Audi Elsa Newsletter
• 10121947Oct 21, 2013Equipment, Engine cooling. The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
• 10121316Oct 21, 2013Electrical system, Air bags. Supersedes Technical Service Bulletin Group 69 number 12-25 dated April 25, 2012. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model?s SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the…
• 10216645Oct 16, 2013Equipment, Back-over prevention (rear camera). In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in…
• 10121301Oct 16, 2013Engine. Supersedes Technical Service Bulletin Group 17 number 13-42 dated October 10, 2013. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine.
• 10065725Oct 16, 2013Engine. Summary to be provided on a future date.
• 10228332Oct 10, 2013Engine cooling. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
• 10225011Oct 10, 2013Engine cooling. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
• 10221984Oct 10, 2013Engine cooling. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
• 10216644Oct 10, 2013Back-over prevention (rear camera), Equipment. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in…
• 10121300Oct 10, 2013Engine cooling. Supersedes Technical Service Bulletin Group 10 number 12-05 dated March 20, 2012. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine.
• 10121297Oct 10, 2013Engine. Supersedes Technical Service Bulletin Group 01 number 13-24 dated August 20, 2013. MIL on. DTCs are stored in the engine control module. Mileage is greater than 15,000 miles. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction.
• 10228330Oct 8, 2013Engine cooling. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL…
• 10225009Oct 8, 2013Engine cooling. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL…
• 10221982Oct 8, 2013Engine cooling. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in order to prevent the MIL…
• 10121295Oct 8, 2013Equipment. During reset of the service reminder, the following message appears on the ODIS tester: ?Secondary air injection system - checking secondary air mass?. MIL is not illuminated. Under certain driving conditions, the secondary air ports in the cylinder head can accumulate carbon over time, causing a restriction. The ODIS tester can identify the state of the restriction, and will request that the system is cleaned in…
• 10212668Oct 7, 2013Electrical system. Low battery charge: excess current draw location
• 10121306Oct 7, 2013Electrical system. Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
• 10212667Oct 4, 2013Electrical system. Battery testing and charging - vehicles with BDM
• 10210615Oct 4, 2013Equipment. Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367). When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging takes place at the jumper posts in the engine compartment. This is due to the added resistance in the system between the battery and jumper posts.
• 10121305Oct 4, 2013Electrical system. Supersedes Technical Service Bulletin Group 27 number 12-10 dated February 13, 2012. Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367). When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging takes place at the jumper posts in the engine compartment. This is due to the added…
• 10121945Oct 2, 2013Equipment, Body and structure. Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
• 10243918Oct 1, 2013Fuel system, Other or unknown. Audi Oil Capacity Chart
• 10121338Sep 27, 2013Suspension, Steering. Supersedes Technical Service Bulletin Group 44 number 13-36 dated February 18, 2013. This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration in one or both of the following…

← All problems reported for the 2010 Audi A5