2015 Audi A8 Technical Service Bulletins

1,106 technical service bulletins (TSBs) are on record for the 2015 Audi A8. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10124748Oct 13, 2014Transmission and drivetrain, Electrical system. Supersedes Technical Service Bulletin Group 37 number 14-43 dated September 26, 2014. The shifting operation of the gearbox may feel uncomfortable when the vehicle is coming to a stop, or slight engine hesitation may be felt when taking off from a stop. Incorrect calibration of the engine control module (ECM) and transmission control module (TCM) software.
• 10066018Oct 13, 2014Electrical system. Summary to be provided on a future date.
• 10124751Oct 12, 2014Wheels. Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
• 10243756Oct 6, 2014Equipment. Audi Elsa Newsletter
• 10216690Oct 6, 2014Fuel system. Beginning with MY2009, the filler necks of various TDI clean diesel vehicles were equipped with a misfueling guard (Figure 1). The guard minimizes the likelihood that fuel other than ultra-low sulfur diesel will be put into the vehicle. The misfueling guard is designed to remain in a locked position when a nozzle with a diameter typically suited for non-diesel fuels (approximately 13/16?, or 20.6mm) is inserted, to…
• 10124720Oct 6, 2014Fuel system. Supersedes Technical Service Bulletin Group 20 number 13-26 dated May 15, 2013. Customer states that the vehicle cannot be refueled due to difficulty inserting the fuel pump nozzle into the filler neck. Customer may also state that the flap is stuck in a locked position and it cannot be moved with fingers.
• 10065970Oct 6, 2014Fuel system. Summary to be provided on a future date.
• 10226490Oct 2, 2014Transmission and drivetrain. Customer may report harsh shift concerns; no faults are stored and concern is reproducible
• 10210697Oct 2, 2014Exterior lighting. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in the Service portion of this bulletin) before TAC is contacted. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced.
• 10124763Oct 2, 2014Electrical system, Equipment. Supersedes Technical Service Bulletin Group 91 number 13-08 dated September 20, 2013. The customer would like to add a different navigation map database for countries outside of the USA or Canada. The customer would like to change the MMI system language to a different language that is not already supported by MMI.
• 10124723Oct 2, 2014Transmission and drivetrain. Supersedes Technical Service Bulletin Group 37 number 12-65 dated September 25, 2012. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced. No faults are stored. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in…
• 10228408Oct 1, 2014Equipment. Service Information.
• 10222060Oct 1, 2014Equipment. Service Information.
• 10124714Oct 1, 2014Tires. This document contains tire chain information for all MY 2015 vehicles.
• 10243764Sep 29, 2014Equipment. Audi Elsa Newsletter
• 10226494Sep 26, 2014Engine cooling. Rough downshifts when coming to a stop or hesitation from a stop
• 10210692Sep 26, 2014Transmission and drivetrain, Electrical system, Steering, Engine cooling. Incorrect calibration of the engine control module (ECM) and transmission control module (TCM) software. The shifting operation of the gearbox may feel uncomfortable when the vehicle is coming to a stop, or slight engine hesitation may be felt when taking off from a stop.
• 10124812Sep 26, 2014Electrical system. The shifting operation of the gearbox may feel uncomfortable when the vehicle is coming to a stop, or slight engine hesitation may be felt when taking off from a stop. Incorrect calibration of the engine control module (ECM) and transmission control module (TCM) software.
• 10066011Sep 26, 2014Electrical system. Summary to be provided on a future date.
• 10249101Sep 23, 2014Engine cooling, Transmission and drivetrain. ECM/TCM Software Update (FED_EMS)
• 10124806Sep 23, 2014Visibility (wipers, defrost, mirrors). Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
• 10124767Sep 23, 2014Transmission and drivetrain. On Audi A8 vehicles with 4.0 ltr engines the shifting operation of the gearbox may feel uncomfortable or a slight engine hesitation may be felt. This Update is in effect until removed.
• 10067788Sep 23, 2014Electrical system. Summary to be provided on a future date.
• 10249080Sep 22, 2014Transmission and drivetrain, Other or unknown, Engine cooling. ECM/TCM Software Update
• 10243763Sep 22, 2014Equipment. Audi Elsa Newsletter
• 10124782Sep 22, 2014Electrical system. This communication contains information on the upcoming ECM/TCM software update 37I9.
• 10067664Sep 22, 2014Electrical system. Summary to be provided on a future date.
• 10244039Sep 12, 2014Other or unknown. 2015 Scheduled Maintenance Intervals
• 10216629Sep 12, 2014Fuel system. In an effort to gain information on the systems listed above, we are asking that you contact TAC before replacing any parts. This will assist us in diagnosing any potential issues.
• 10124822Sep 12, 2014Engine. Supersedes Technical Service Bulletin Group 01 number 13-28 dated September 12, 2013. If a model year 2015 Q5 TDI, A6 TDI, A7 TDI, or A8L TDI clean diesel (engine code CPNA or CPNB) requires diagnosis or repair of the engine, diesel fuel delivery, exhaust after-treatment (SCR/AdBlue and emissions) systems, or transmission, a Repair Authorization is necessary prior to repair. This also applies to any messages…
• 10124798Sep 12, 2014Visibility (wipers, defrost, mirrors). Supersedes Technical Service Bulletin Group 92 number 14-08 dated August 19, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank.
• 10065444Sep 12, 2014Electrical system. Summary to be provided on a future date.
• 10216628Sep 10, 2014Engine cooling. Customer vehicle is fitted with unauthorized ECM tuning.
• 10124823Sep 10, 2014Equipment. Customer vehicle is fitted with unauthorized ECM tuning. All systems on Audi vehicles are engineered to work together using the factory calibrations, which have been extensively tested and validated before the vehicle is released for sale. The Audi warranty coverage is based on the results of developing the vehicle under the factory calibration.
• 10124772Sep 8, 2014Equipment. This document contains the scheduled maintenance intervals for MY 2015 vehicles.
• 10250953Aug 26, 2014Equipment. Repair Authorization
• 10250195Aug 21, 2014Tires, Equipment. Audi Normal Load Condition Tire Pressure Table
• 10243814Aug 19, 2014Equipment. Audi Technician Report
• 10067968Aug 19, 2014Equipment. Summary to be provided on a future date.
• 10250956Aug 13, 2014Equipment. Repair Authorization
• 10250954Aug 4, 2014Equipment. Repair Authorization.
• 10244008Jul 31, 2014Other or unknown. Fluid capacity chart
• 10122524Jul 31, 2014Equipment. Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
• 10228298Jul 30, 2014Engine cooling. A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
• 10221950Jul 30, 2014Equipment. A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
• 10231144Jul 28, 2014Equipment. Technical bulletins and updates
• 10231126Jul 28, 2014Electrical system. i-wire new wiring diagram application
• 10216621Jul 28, 2014Engine cooling. Due to a production issue for the level sensor, the ECM cannot correctly read the reductant (AdBlue) fluid level.
• 10122527Jul 28, 2014Electrical system. Supersedes Technical Service Bulletin Group 01 number 14-81 dated June 24, 2014. The MIL is on. DTC P203B00 (Reductant Level Sensor Circuit Range/Performance) is stored in the engine control module (ECM). Due to a production issue for the level sensor, the ECM cannot correctly read the reductant (AdBlue) fluid level.
• 10065436Jul 28, 2014Electrical system. Summary to be provided on a future date.

← All problems reported for the 2015 Audi A8