2008 Audi R8 Technical Service Bulletins

359 technical service bulletins (TSBs) are on record for the 2008 Audi R8. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10035249Sep 1, 2010Engine cooling. Audi: mil on; rough idle; one or more of the following dtcs are stored-dtc p0300 (random/multiple cylinder misfire detected); dtc p0301-0312 (cyl. 1 misfire detected-cyl.12 misfire detected); engine may have reduced performance without significant loss of power or stalling.
• 10033214Jul 26, 2010Fuel system. Audi: fuel gauge reads empty after refueling (dtcs 00438, 00771, 00439, or 00251). Due to the of sections of cable in the area of the 2 pin plug in connections (inside the fuel tank) between the fuel tank locking flanges and the fuel gauge sensors g, g169, g237 or g393, there are vibrations while driving.
• 10035248Jun 1, 2010Engine cooling. Audi: mil on; rough idle, one or more of the following dtcs are stored-dtc p0300 random/multiple cyliner misfire detected; dtc p0301-0312 (cyl. 1 misfire detected-cyl. 12 misfire detected); engine may have reduced performance without significant loss of power or stalling.
• 10035268Mar 24, 2010Electrical system. Audi: software version management (svm) operating instructions. Detailing the general process for carrying out a software version management (svm) software update for any tsb or required vehicle update (rvu). Troubleshooting information is included.
• 10030593Jun 30, 2009Electrical system, Fuel system. Audi: mil light on and dtc p2294 (fuel pressure regulator 2 control circuit), p2295 (fuel pressure regulator 2 control circuit low), p2296 (fuel pressure regulator 2 control circuit high) in fault memory drivability is not affected. Wiring harness to high pressure pump might be stressed and tightly bent at the pump connector. The harness also might be bent around sharp edges of cylinder head. No models listed.
• 10032290May 13, 2009Electrical system. Audi: software version management (svm), operating instructions. Svm is a process to update the programming in flashable (re-programmable) control modules and/or to document changes in software levels in audi vehicles. This system uses the vas 5051b or vas 5052 diagnostic tools to send vehicle specific data to the svm database, to download instructions from the svm database, and to flash control units for…
• 10028768Dec 15, 2008Electrical system. Audi: software version management(svm) operating instructions. Its a process to update the programming in flashable (reprogrammable) control modules and/or to document changes in software levels in all audi vehicles.
• 10027923Nov 19, 2008Wheels. Audi: wheel bolts require torque adjustment. Torque sticks and torque extension bars are not approved by audi of america, inc. And should not be used to apply torque to wheel bolts. All audi models included.
• 10024301Feb 1, 2008Transmission and drivetrain. Audi service campaign: see document search button for owner letter. Customer satisfaction campaign circular - 2008 my audi r8 engine and transmission control module software update. Csc was received.

← All problems reported for the 2008 Audi R8