2015 Audi SQ5 Technical Service Bulletins

462 technical service bulletins (TSBs) are on record for the 2015 Audi SQ5. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10231126Jul 28, 2014Electrical system. i-wire new wiring diagram application
• 10122549Jul 22, 2014Brakes. Supersedes Technical Service Bulletin Group 46 number 14-76 dated March 25, 2014. The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
• 10228297Jul 15, 2014Electrical system. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
• 10221949Jul 15, 2014Equipment. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
• 10250966Jul 14, 2014Brakes. Brake pulsation diagnostic guidelines
• 10231125Jul 14, 2014Equipment. Pending service solutions and bulletins
• 10249054Jul 10, 2014Other or unknown. Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
• 10250190Jul 7, 2014Equipment. Informe del técnico de Audi
• 10243853Jul 7, 2014Equipment. Audi Technician Report
• 10243852Jul 7, 2014Equipment. Audi Technician Report
• 10243851Jul 7, 2014Equipment. Audi Technician Report
• 10238500Jul 7, 2014Equipment. inspection
• 10122598Jul 7, 2014Equipment. This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
• 10122596Jul 7, 2014Equipment. This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
• 10250959Jul 2, 2014Suspension. Shock absorber leaks: assessment aid
• 10250958Jul 2, 2014Steering. Squeaking noises when steering or maneuvering
• 10250665Jul 2, 2014Body and structure, Equipment. Shock absorber leaks: assessment aid
• 10250664Jul 2, 2014Steering. Squeaking noises when steering or maneuvering
• 10231130Jun 30, 2014Engine cooling. Idenifying and mixing factory fill engine coolants
• 10226691Jun 14, 2014Tires. Audi Normal Load Condition Tire Pressure Table
• 10231127Jun 9, 2014Equipment, Electrical system. ElsaPro Software update and technical bulletins
• 10250187May 29, 2014Equipment. Tabla de presión de los neumáticos de condición de carga normal para Audi modelo 2015
• 10250186May 29, 2014Tires, Equipment. Audi Normal Load Condition Tire Pressure Table
• 10250111May 29, 2014Equipment. Tabla de presión de los neumáticos de condición de carga normal para
• 10122497May 29, 2014Tires. This document contains the Audi normal load condition tire pressure table. The document is in Spanish.
• 10122496May 29, 2014Tires. This document contains the Audi normal load condition tire pressure table.
• 10243821May 28, 2014Equipment. Audi Vehicle Detail Report
• 10243820May 28, 2014Equipment. Audi Vehicle Detail Report
• 10228295May 28, 2014Engine cooling. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
• 10226529May 28, 2014Transmission and drivetrain. Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
• 10221947May 28, 2014Engine cooling. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
• 10210679May 28, 2014Electronic stability control, Transmission and drivetrain. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system…
• 10216575May 1, 2014Equipment. Fluid Capacity Chart.
• 10243850Apr 28, 2014Equipment. Audi Technician Report
• 10250106Apr 14, 2014Equipment. Elsa newsletter
• 10243846Apr 14, 2014Equipment. Audi Delivery Guidelines
• 10122398Apr 14, 2014Equipment. This document contains the Audi Delivery guidelines and includes a predelivery checklist that ensures that final vehicle quality inspection is completed.
• 10250196Apr 11, 2014Tires, Equipment. Audi Normal Load Condition Tire Pressure Table
• 10122384Apr 11, 2014Equipment, Tires. This document contains the Audi normal load condition tire pressure table.
• 10231131Apr 3, 2014Equipment. Technical bulletins and updates
• 10231135Mar 31, 2014Equipment. Technical bulletins and updates
• 10122295Mar 31, 2014Air bags. Supersedes Technical Service Bulletin Group 69 number 13-26 dated October 21, 2013. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when…
• 10231133Mar 17, 2014Equipment. Technical bulletins and updates
• 10125540Feb 27, 2014Equipment, Tires. This document contains the normal load condition tire pressure table.
• 10228292Feb 20, 2014Engine cooling. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
• 10221944Feb 20, 2014Engine cooling. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
• 10243819Dec 6, 2013Equipment. Audi Vehicle Detail Report
• 10250198Nov 14, 2013Equipment, Tires. Audi Normal Load Condition Tire Pressure Table
• 10250197Nov 5, 2013Tires, Equipment. Audi Normal Load Condition Tire Pressure Table
• 10250681Nov 1, 2013Equipment. Scheduled maintainence protocols

← All problems reported for the 2015 Audi SQ5