2006 BMW 325CI Exterior lighting Problems

“Drivers side low beam started flashing when car hit bumps and while turning the steering wheel to the right. Opened bulb access cover to check the bulb and found that the majority of the wiring inside the headlight assembly has hardened and flaking insulation, exposing bare copper wire and allowing it to short out. Removed the headlight assembly for a more through inspection and discovered the same damage on the high beam wiring and deterioration on the entire wiring harness inside the light. Serious safety risk as well as fire risk.”

“Bmw 325CI 2006 front left adaptive headlight wiring deteriorates over time. This cause the wiring to crack and fail. The front left headlight failed while driving, creating a dangerous situation for the driver and others on the road. When the wiring fails the driver cannot display turn signals, use high beams or any headlight functions. Bmw does not provide a solution or help to fix the issue. The vehicle was in motion at night when the headlight failed. The part is the front headlight igniter wiring harness. …”

“The headlights in my car both went out because of this wiring issue. The wiring insulation inside the headlight is very prone to cracking and subsequently breaking which causes the headlight to not function. I have repaired this issue myself on both headlights for almost every wire going into the igniter. No headlights is a major safety issue at night, and due to the cracking along all of the wiring, it could go out at any time again. I had this issue looked at by the dealership and they tried to sell me new bulbs instead. …”