2004 BMW 5 Series Recalls
NHTSA lists 6 recall campaigns for the 2004 BMW 5 Series. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.
- Electrical system › 12v/24v/48v battery › CablesCovers: BMW 5 Series 2004–2010, 6 Series 2004–2010, M5 2006–2010 +1 more
Reported issue: Bmw is recalling certain model year 2004-2010 5-series, model year 2004-2010 6-series, model year 2006-2010 m5, and model year 2007-2010 m6 vehicles. The insulated bulkhead connector for the positive battery cable may have been incorrectly attached to the trunk floor panel, which can lead to a loosening of the bolt connection. As it loosens, an increase in electrical resistance at this cable connection is possible…
Possible consequence: Overheating could lead to a fire, even while the vehicle is not in use. As a precaution, owners are advised to park outside until the remedy has been made.
Remedy: Bmw will notify owners, and dealers will inspect and secure the battery bolt cable connection as necessary, free of charge. The safety recall began on april 30, 2012. Owners may contact bmw customer relations and services at 1-800-525-7417.
- Service brakes, hydraulic › Power assist › VacuumCovers: BMW 5 Series 2004–2010, 7 Series 2002–2008, 6 Series 2004–2010
Reported issue: Bmw is recalling certain model year 2004-2010 5-series, 6-series, and model year 2002-2008 7-series vehicles. A check valve of the brake vacuum pump may leak a small amount of lubricating oil. Over time this could result in contamination of the brake booster.
Possible consequence: Power assist braking performance could be adversely affected. In extreme cases there could be a complete loss of power assist braking. An unexpected reduction or loss in power braking assist may increase the risk of a crash.
Remedy: Bmw will notify owners and dealers will repair the vehicles free of charge. The safety recall began on november 24, 2010. Owners may contact bmw at 1-800-525-7417.
- Air bags › FrontalCovers: BMW 5 Series 2004–2006, X3 2004–2006, 3 Series 2006
Reported issue: Bmw is recalling 200,000 my 2006 3 series sport seat, my 2004-2006 5 series standard and sport seat, and my 2004-2006 x3 passenger vehicles. Depending on the manner and frequency of the front passenger's entry and exit, small cracks have developed in the mat. If this occurs, the front passenger air bags, with the exception of the head protection system, will be deactivated and the air bag warning lamp as well as…
Possible consequence: In this situation the front passenger air bags will not deploy even if a sufficiently severe accident would occur and occupant protection provided by the system would not be possible.
Remedy: Dealers will rework the front passenger seat sensor mat so that external force application to the seat does not cause a crack to the mat. The recall began on november 6, 2008. Bmw will also extend the warranty on these vehicles to 10 years from first registration without any mileage limit. Owners may contact bmw at…
- Seats › Front assembly › Seat heater/coolerCovers: BMW 5 Series 2004, 7 Series 2003–2004
Reported issue: On certain passenger vehicles equipped with front seat heating systems, upon entering and exiting the vehicle, excessive contact with the side bolster that is contained in the seat's backrest may damage the heating mat located in this area. If such damage were to occur, with the system turned on, the vehicle occupant may feel excessive heat from this area.
Possible consequence: It is possible that the heating mat in the backrest's side bolster could overheat and damage, or melt a small hole in, this area of the seat cover. If this happened, it could lead to an occupant being burned.
Remedy: Dealers will modify the seat heating circuit. The recall is expected to begin during december 2004. Owners should contact bmw at 1-800-831-1117.
- Power train › Automatic transmission › Control module (tcm/pcm/tecm)Covers: BMW 5 Series 2004, X5 2004, 7 Series 2004 +1 more
Reported issue: On certain passenger vehicles equipped with 8 and 12 cylinder engines, the digital engine management control (emc) units were not produced according to specifications.
Possible consequence: As a result, engine stalling will occur after a short period of operation. The vehicle may not be able to restart. Also, a loss of power steering and, after repeated actuation of the brake pedal, a loss of brake power assist will occur. These conditions could result in a vehicle crash.
Remedy: Dealers will install a new digital engine management control unit. The recall began on july 16, 2004. Owners should contact bmw at 1-800-831-1117.
- Fuel system, gasolineCovers: BMW 5 Series 2004, 6 Series 2004
Reported issue: On certain passenger vehicles equipped with 8-cylinder engines, a circular retention clip at the quick-release coupling along the fuel supply line was inadvertently not installed.
Possible consequence: In the event of a severe frontal crash, the quick-release coupling could separate causing fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy: Dealers will install a circular retention clip at the quick-release coupling along the fuel supply line. The recall began on july 5, 2004. Owners should contact bmw at 1-800-831-1117.
NHTSA investigations
- EA08001Bmw airbag light illuminationClosed · Jan 4, 2008
← All problems reported for the 2004 BMW 5 Series
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.