2013 Chevrolet Camaro Technical Service Bulletins

2,041 technical service bulletins (TSBs) are on record for the 2013 Chevrolet Camaro. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10137841Jul 23, 2014Tires, Equipment, Wheels. This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.
• 10112125Jul 23, 2014Wheels, Brakes. This Preliminary Information communication provides information to the technician about vehicles that may have wheels that are collecting an excessive amount of brake dust. Dealer should advised the customer that This is considered a normal characteristic.
• 10112123Jul 23, 2014Tires, Wheels. This Preliminary Information communication provides information to the technician about installing wheels and tires onto another vehicle after taking them off a different vehicle. General Motors does not recommend or authorize installing a 20 inch wheel onto a vehicle with a factory installed 18 inch wheel due to differences in the chassis components.
• 10248447Jul 18, 2014Electrical system. There is a quality concern with the Camaro Remote Start kit
• 10140431Jul 18, 2014Suspension. This preliminary bulletin provides information on a possible normal front end noise if the suspension has been confirmed to be in working order.
• 10138586Jul 18, 2014Suspension. This preliminary bulletin provides information on a possible normal front end noise if the suspension has been confirmed to be in working order.
• 10137836Jul 18, 2014Equipment, Suspension. This preliminary bulletin provides information on a possible normal front end noise if the suspension has been confirmed to be in working order.
• 10112116Jul 17, 2014Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10140367Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10138582Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10137832Jul 16, 2014Equipment. This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
• 10140365Jul 15, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10138580Jul 15, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10137830Jul 15, 2014Equipment. This informational bulletin provides additional information to the technicians and how to submit a field product report.
• 10140364Jul 14, 2014Electrical system, Electronic stability control. This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
• 10138579Jul 14, 2014Equipment, Electrical system. This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
• 10137829Jul 14, 2014Equipment, Electrical system, Transmission and drivetrain. This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
• 10140363Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10138578Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10137828Jul 11, 2014Equipment. This information bulletin provides the dealers on how to submit a product information report.
• 10140359Jul 8, 2014Equipment. This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.
• 10140357Jul 8, 2014Fuel system, Engine. This informational bulletin was created to inform the technician of cold start ticking noises in the engine compartment may be caused by the fuel pump and/or the fuel injectors and no
• 10138574Jul 8, 2014Equipment. This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.
• 10138572Jul 8, 2014Fuel system. This informational bulletin was created to inform the technician of cold start ticking noises in the engine compartment may be caused by the fuel pump and/or the fuel injectors and no
• 10137824Jul 8, 2014Equipment, Electrical system. This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.
• 10137822Jul 8, 2014Fuel system, Equipment, Engine cooling. This informational bulletin was created to inform the technician of cold start ticking noises in the engine compartment may be caused by the fuel pump and/or the fuel injectors and no
• 10112102Jul 8, 2014Electrical system. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
• 10253132Jul 1, 2014Transmission and drivetrain. Engineering Information
• 10246874Jul 1, 2014Wheels. Questions On Swapping Wheels From One Vehicle To Another.
• 10246864Jul 1, 2014Body and structure. Excessive Brake Dust On Wheels.
• 10140353Jul 1, 2014Equipment. This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and list the requirements for the dealer to comply.
• 10137818Jul 1, 2014Equipment. This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and list the requirements for the dealer to comply.
• 10112099Jul 1, 2014Equipment. This Preliminary Information communication provides information to the technician that the compact disc player is unable to pause a song. These vehicles were not built with a pause button. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10112098Jul 1, 2014Equipment. This Preliminary Information communication provides information to the technician that a vibration is heard and/or felt in the vehicle shortly after a repair involving removal and installation of the air conditioning compressor or the associated compressor bracket. Technician will need to inspect the fasteners for evidence of being bottomed out or stretched. Technician will need to replace and damaged fasteners.
• 10074055Jul 1, 2014Transmission and drivetrain. Summary to be provided on a future date.
• 10073883Jul 1, 2014Equipment. Summary to be provided on a future date.
• 10073355Jul 1, 2014Equipment. Summary to be provided on a future date.
• 10073310Jul 1, 2014Wheels. Summary to be provided on a future date.
• 10073308Jul 1, 2014Brakes, Wheels. Summary to be provided on a future date.
• 10069273Jul 1, 2014Suspension. Summary to be provided on a future date.
• 10056257Jul 1, 2014Transmission and drivetrain. Chevrolet: when trying to shift into 1st or 2nd gear, the manual transmission is difficult and noise, clunk/grind/rattle and clutch pedal noise is heard and operation would be poor. Model 2012-2014 camaro, corvette.
• 10248444Jun 30, 2014Equipment. Vehicle Recalls
• 10125985Jun 27, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have Diagnostic Trouble Code P00C6 and/or P228C set. Technician will need to inspect the terminals at the Engine Control Module for fit and tension as well as the crimp to wire connection. Terminals to inspect in the ECM are connector x2 terminals 3, 18, and 19 for the fuel rail pressure sensor. Also connector x3…
• 10126308Jun 26, 2014Suspension. This informational bulletin was created to aid the technician in diagnosing the difference between a shock or strut that has a fluid residule from a possible external source from a leaking shaft seal.
• 10125972Jun 26, 2014Transmission and drivetrain, Engine. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
• 10126301Jun 24, 2014Equipment. This preliminary bulletin explains to the technician to use the vin when reprogramming the radio using the techline/service programming systems.
• 10125962Jun 19, 2014Brakes, Wheels. This Preliminary Information communication provides information to the technician about vehicles that may have wheels that are collecting an excessive amount of brake dust. Dealer should advised the customer that This is considered a normal characteristic.
• 10126291Jun 18, 2014Visibility (wipers, defrost, mirrors). This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.
• 10126285Jun 16, 2014Equipment. This preliminary bulletin provides procedures on how to reset or refresh the XM radio receiver is the customers states that they only get a few channels.
• 10125956Jun 16, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may not receiving all channels on the XM band. Technician will need to use a scan tool and verify current Digital Radio Receiver Status under Data Display. Technician will need to look at the second line labeled Digital Radio Receiver Status will display a number of 00 - 04. Technician will repair per the status…

← All problems reported for the 2013 Chevrolet Camaro