2010 Chevrolet Corvette Technical Service Bulletins

1,260 technical service bulletins (TSBs) are on record for the 2010 Chevrolet Corvette. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10138638Feb 21, 2014Wheels. This informational bulletin explains how to balance a chrome wheel without damaging the chrome face of the rim.
• 10138637Feb 21, 2014Wheels, Equipment, Tires. This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.
• 10138631Feb 18, 2014Tires, Wheels. This technical bulletin provides a procedure on cleaning a leaking rim, to correct a customers concern of having a slow tire leak and low tire psi message on.
• 10138630Feb 18, 2014Equipment, Tires. This informational bulletin explains the use of Nitrogen in GM tires.
• 10138629Feb 18, 2014Tires. This bulletin provides information regarding the normal tire wear condition of slight or mild tire feathering and recommended practices.
• 10138621Feb 17, 2014Equipment. This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
• 10111927Feb 12, 2014Brakes, Fuel system, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10138609Feb 10, 2014Equipment. The informational bulletin provides a procedure to remove and repair rust from a Hem Flange.
• 10138606Feb 10, 2014Visibility (wipers, defrost, mirrors), Equipment. This warranty administration bulletion provides the dealer technician information and guidelines for claiming a windshield.
• 10138605Feb 10, 2014Equipment. This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
• 10138601Feb 6, 2014Equipment, Transmission and drivetrain. This preliminary informational bulletin provides a procedure to inspect the transmissions filter for splits or cracks to correct the customers concern for no forward, reverse or slips.
• 10111895Feb 4, 2014Engine, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a "NO FOB DETECTED" message when attempting to start the vehicle. Technician will need to ensure the battery is adequately charged to start vehicle. Also check the battery in the FOB to ensure it is 2 to 3 direct current volts. Technician will need to get in the vehicle with a known good fob press the Start…
• 10111894Feb 4, 2014Equipment. This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation…
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10073700Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10137784Jan 31, 2014Equipment. This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
• 10112045Jan 31, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
• 10137781Jan 23, 2014Equipment. This informational bulletin was created to inform that any accessories that are install from the GM factory will be covered under the standard vehicle warranty and dealer installed accessories will be cover for a full year (12months).
• 10112018Jan 22, 2014Engine cooling. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam…
• 10112013Jan 22, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10112000Jan 17, 2014Transmission and drivetrain. This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle.
• 10111997Jan 16, 2014Equipment. This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
• 10137778Jan 15, 2014Engine cooling. This technical bulletin provides a procedure to replace the exhaust pipes and catalytic converters for the customers concern of the MIL illuminated.
• 10137777Jan 14, 2014Equipment, Electrical system. This Informational bulletin explains the warranty and policy exchange program for electronic devices and products, what can be approved by TAC and where the electronic parts can be returned to.
• 10137776Jan 14, 2014Transmission and drivetrain. This information was created to inform the technician that the 2-3 upshift and the 3-2 downshift clunk is caused by the releasing of the 2-4 band and application of the 3-4 clutch assembly during an upshift. Also during a 3-2 downshift, the releasing of the 3-4 clutch during the application of the 2-4 band, can cause torque reversal down the output shaft creating a clunk. This is a normal condition.
• 10137775Jan 8, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10111977Jan 7, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that are setting Diagnostic Trouble Code P0300 after engine repairs. Technician will need to ensure that injector connectors for cylinder 5-7 and 6-8 are not crossed.
• 10137773Jan 2, 2014Equipment. This warranty administration bulletin provides information on GM?s policy for comprehensive courtesy transportation to its customers.
• 10137772Jan 2, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10245816Jan 1, 2014Electrical system. Service Engine Soon (SES) Light Comes On with DTCs P0420, P0430 Set
• 10190934Jan 1, 2014Equipment, Body and structure. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10190933Jan 1, 2014Body and structure, Equipment. Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the…
• 10066082Jan 1, 2014Engine. Summary to be provided on a future date.
• 10133103Dec 16, 2013Back-over prevention (rear camera). This informational bulletin provides directions on submitting different PIRs
• 10133098Dec 13, 2013Equipment. This preliminary information bulletin provides a revision of 13-00-89-004D to include updated information.
• 10133097Dec 13, 2013Equipment. This preliminary bulletin explains physical damage to radios and IPCs must be reviewed and validated if covered under GM warranty or not.
• 10133087Dec 5, 2013Visibility (wipers, defrost, mirrors). This preliminary bulletin explains the marks in the glass are normal when wearing polarized sunglasses and do not replace any glass for this reason.
• 10133086Dec 4, 2013Fuel system, Other or unknown. This informational bulletin provides information on how to save fuel and proper maintenance without using fuel or oil additives.
• 10253632Dec 1, 2013Visibility (wipers, defrost, mirrors). Rear and Side Tempered Glass Spots.
• 10118889Nov 27, 2013Electrical system. This preliminary bulletin provides information on Service Programming System (SPS) Errors (E4398, E4399, E4403, E4404, E4413, E4414, E4423 or E4491).
• 10118880Nov 19, 2013Equipment. This informational bulletin provides an update for 13-00-89-004C to include updated information.
• 10118866Nov 11, 2013Equipment. This informational Bulletin provides a revision for 00-06-01-026D to add the 2014 model year.
• 10118862Nov 8, 2013Electrical system, Visibility (wipers, defrost, mirrors). This preliminary bulletin provides a pre-inspection symptom list before preforming any repairs to any of windows for noises or performance.
• 10118859Nov 7, 2013Equipment. This informational bulletin provides a revision for 04-06-04-047K to add the 2014 model year.
• 10118858Nov 7, 2013Equipment. This informational bulletin provides a revision for 04-06-04-047 to add the 2014 model year.
• 10118844Nov 4, 2013Equipment. This informational bulletin provides a revision for 09-06-04-015A to add the 2012-2014 model years.
• 10246619Nov 1, 2013Equipment. Car and Truck Fix it Right the First Time Issues
• 10118842Nov 1, 2013Equipment. This informational Bulletin provides a revision for 10-08-110-001 to add the 2012-2014 model years.
• 10112331Nov 1, 2013Engine cooling. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.

← All problems reported for the 2010 Chevrolet Corvette