2014 Chevrolet Corvette Technical Service Bulletins

1,986 technical service bulletins (TSBs) are on record for the 2014 Chevrolet Corvette. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10126951Dec 6, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have a clock that is slow to update while driving when the clock auto set feature enabled. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10139211Dec 4, 2017Equipment. This informational bulletin provides information to dealership personnel on enhancing field product reports with digital pictures.
• 10139176Dec 4, 2017Equipment. This informational bulletin provides information for the technicians on multi-media infotainment tester (MIT), does not function properly when diagnosing infotainment complaints, which may lead to mis-diagnosis.
• 10139099Nov 30, 2017Equipment. This technical bulletin provides a procedure to clear the codes and re-evaluate the XM radio channels to correct a condition of audio muting when listening to some Sirius XM channels but if they change channels they will find others that experience normal audio. This could be due to interference from transmitting sources outside of Sirius XM?s frequency range.
• 10139088Nov 30, 2017Equipment, Engine cooling. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10140341Nov 28, 2017Steering. This preliminary information bulletin provides a procedure to install a power steering gear cooling duct for track use to decrease temperature with the steering gear.
• 10140340Nov 28, 2017Equipment. This preliminary information bulletin provides a procedure on how to check for the customer concern of a blank radio with/without audio, by checking the the wiring harness, ECU and reprograming the HMI software update, if the wiring or ECU are not the cause.
• 10139141Nov 22, 2017Back-over prevention (rear camera). This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
• 10139095Nov 22, 2017Equipment. This bulletin describes the Dealer special tool loan program process.
• 10139089Nov 22, 2017Equipment, Transmission and drivetrain, Engine. This informational bulletin provides information to dealership personnel on automatic transmission shift and engine drivability concerns and/or MIL ON due to aftermarket oil bath air filter use.
• 10139118Nov 17, 2017Equipment. This informational bulletin provides a listing of the parts availability for coax repair procedures and what is needed to complete some repairs.
• 10139108Nov 17, 2017Visibility (wipers, defrost, mirrors). This informational bulletin provides information for assisting the customer in setting the position for the memory mirror and the reverse tilt
• 10139090Nov 17, 2017Engine, Electrical system. This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
• 10125106Nov 7, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
• 10125098Nov 3, 2017Engine, Transmission and drivetrain. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10134594Oct 25, 2017Equipment, Engine. This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
• 10134621Oct 24, 2017Equipment. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
• 10123254Oct 16, 2017Body and structure, Equipment. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced.
• 10123252Oct 13, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency…
• 10134593Oct 11, 2017Equipment. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
• 10134581Oct 6, 2017Wheels. This bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customers concern of wheel clicking.
• 10123227Oct 5, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
• 10123225Oct 4, 2017Equipment. This Preliminary information communicatesCustomers may experience MIL Illumination with a repaet diagnostic codes P2096 P2098. These code can be set when the driver drives digitally when they tap the accelerator pedal (on - off - on -off) to maintain speed. Engneering aware of the issueand working on the fix.
• 10123222Oct 3, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10190338Oct 1, 2017Equipment. Essential Tools that Include Consumable Parts (U.S. Only)
• 10190337Oct 1, 2017Suspension. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
• 10190320Oct 1, 2017Electrical system, Equipment. IPC Odometer Programming Method Quick Reference Guide
• 10190272Oct 1, 2017Wheels, Equipment. Clicking Noise from Front Wheels While Turning at Slow Speeds Condition Some customers may comment on a clicking noise emanating from the front wheels location. This condition may be more predominant at low speeds (10-20 mph or 16-32 km/h) during full wheel lock turns on dry clean pavement. Cause - his may be caused by interaction between the wheel mounting face and the wheel mounting surfaces on the brake rotor…
• 10157041Sep 28, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical…
• 10159570Sep 20, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10157020Sep 20, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10157018Sep 20, 2017Fuel system, Tires, Equipment, Electrical system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 10159613Sep 19, 2017Electrical system. This informational bulletin provides information for programming the low speed LAN module due to the mirrors memory position reverse tilt position is inoperative.
• 10159575Sep 14, 2017Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
• 10159572Sep 14, 2017Equipment. This informational bulletin explains the importance of maintaining the vehicle.
• 10159569Sep 12, 2017Engine cooling, Equipment. This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10159583Sep 11, 2017Electrical system, Engine. This bulletin provides information on replacing the prop shaft hub clamp (AT) or the input shaft frt bearing (MT) whenever the driveline support assembly has been removed for repair.
• 10156999Sep 11, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
• 10156990Sep 6, 2017Equipment. This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
• 10159574Sep 5, 2017Engine. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10140293Aug 31, 2017Engine cooling. This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
• 10140298Aug 30, 2017Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10140403Aug 29, 2017Equipment. This technical bulletin provides repair information to correct a customer concern of a convertible top creak or snap noise while driving.
• 10137741Aug 25, 2017Transmission and drivetrain. This Preliminary Information communication advises the technician that the rear wheel drive manual transmission restriction has ended.
• 10140406Aug 23, 2017Body and structure, Equipment. Thins informational bulletin provides information on Paint-less Dent Repair Process.
• 10140396Aug 23, 2017Wheels. This bulletin provides a procedure to clean the back side of the rims and rotors and to correct the customers concern of wheel clicking.
• 10140294Aug 22, 2017Electrical system. This informational bulletin communicates part restriction and ordering process information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only).
• 10137727Aug 21, 2017Engine. This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
• 10137707Aug 10, 2017Transmission and drivetrain. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch (with excessive crankshaft end play). Technician will test to determine if the crank shaft end play is within specification 0.0015–0.0086 inch.
• 10137705Aug 9, 2017Equipment. This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.

← All problems reported for the 2014 Chevrolet Corvette