1996 Chevrolet K1500 Brakes Problems
- Complaints
- 14about this part
- Share
- 15%of 94 total for the year
- Median mileage
- 69,500miles
- Trend
- Not enough dataFewer than 15 complaints, too few for a reliable trend.
NHTSA recorded 14 complaints about the brakes of the 1996 Chevrolet K1500, 15% of the 94 complaints for this model year. Where a mileage was given, the median is 69,500 miles. 3 of these say a crash was involved, according to the filers.
Fewer than 15 complaints name this part, so treat the figures as a rough indication only.
Example complaints
Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.
“Upon making a left turn brakes locked up, consumer lost control of vehicle and went into a ditch. This was due to the brake rotors breaking and jamming into the brake. This failure was caused by poor design of the rotors, per the dealership.”
NHTSA complaint #10051769, filed 2003-12, 82,000 miles“My ABS brake system comes on under 10mph during normal braking. There is no panic stop involved during the normal braking event. This situation is becoming very troublesome and I'm worried as to whether I'll be able to pull my travel trailer.”
NHTSA complaint #760391, filed 2002-04“Stepped on brakes and left front rotors broke loose from its' hub, causing a severe reduction in braking, and a hard pull to the right. Brake shop says they've never seen this before. Also, right front rotors appear to have stress cracks at rotor/hub juncture. Contacted general motors, no satisfaction.”
NHTSA complaint #715993, filed 1999-12“The hub of the brake rotor became separated from the rotor during vehicle operation. This resulted in a severe vibration, loud grinding noise and a partial lose of control during braking. When the brakes were applied, essentially, one of the calipers was rendered inoperative as the disc it clamps on had separated from the hub. The hub is sheet metal welded to the disc vs. A complete casting as has been previously the standard for this part. Weld failed resulting in the catastrophic failure of this critical brake component. …”
NHTSA complaint #759195, filed 2002-03“In bumper to bumper traffic vehicle in front stopped suddenly. Truck hit brakes (ABS); vehicle kept going & rearended vehicle in front. Took to dealer & mechanic repaired ABS brakes. Was not told what caused problem.”
NHTSA complaint #825593, filed 1998-07Brakes: other model years
Other parts of the 1996 Chevrolet K1500
26 complaintsTires
10 complaintsFuel system
9 complaintsSeats
8 complaintsTransmission and drivetrain
8 complaintsElectrical system
6 complaintsEngine cooling
6 complaintsSeat belts
4 complaintsAir bags
3 complaintsSuspension
3 complaintsVehicle speed control
3 complaintsEquipment
1 complaints
← All problems reported for the 1996 Chevrolet K1500
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Nov 1, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.
To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology