2007 Chevrolet Silverado 1500 Technical Service Bulletins

1,310 technical service bulletins (TSBs) are on record for the 2007 Chevrolet Silverado 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10111788Apr 7, 2014Equipment. This Preliminary Information communication advises the technician that the 2004-2007 Parallel Hybrid Truck parts will be placed on restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10111783Apr 4, 2014Fuel system. This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
• 10250013Apr 1, 2014Electrical system. High Voltage Safety ? High Voltage Disabling
• 10247727Apr 1, 2014Fuel system. Bump Feel Or Clunk Noise After A Stop.
• 10247671Apr 1, 2014Equipment, Electrical system. Parallel Hybrid Truck (PHT) Part Restriction.
• 10247072Apr 1, 2014Brakes. Bump Feel Or Clunk Noise After A Stop.
• 10246646Apr 1, 2014Brakes. Pre-Formed and Pre-Flared Hydraulic Brake Pipe Kits Now Available for Service
• 10245310Apr 1, 2014Electrical system, Equipment. Parallel Hybrid Truck (PHT) Part Restriction.
• 10070562Apr 1, 2014Equipment. Summary to be provided on a future date.
• 10137887Mar 28, 2014Electrical system. This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not
• 10111884Mar 27, 2014Equipment, Fuel system. This Preliminary Information communication provides information to the technician about vehicles that may have a bump feel or clunk noise at a stop or on launch. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle. The bump clunk issue may be due to fuel movement in the fuel tank when not completely full. The condition is eliminated after completely filling…
• 10111876Mar 24, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that the customer or up-fitter may have removed the rear bumper, install a different rear bumper, or add a different box/flat bed/cube box/hitch, etc. to the rear of the truck, which affects the rear park assist operation. Technician can disable the rear park assist for this concern.
• 10111875Mar 24, 2014Engine. This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
• 10137868Mar 19, 2014Engine cooling. This informational bulletin provides information to the customer to clean the exhaust filter when prompt to or the MIL may come on and the truck DPF system may fail.
• 10137866Mar 17, 2014Equipment. This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
• 10111850Mar 5, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that when a Canadian customer may comment that when they travel to the United States, they are unable to connect to OnStar or use hands free calling. Dealer can advise the customer that the existing cell phone provider not having roaming agreements in areas outside of Canada.
• 10111849Mar 5, 2014Electrical system, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a frequent "off route" messages while following Turn by Turn route. Technicians will need to remove power from the Vehicle Communication Interface Module for one hour and retest for the concern.
• 10111846Mar 4, 2014Electrical system. This Preliminary Information communication provides information to the technician about a customer?s request to install OnStar Bluetooth. Dealer should be advised at this time, there are no provisions to add this option to vehicles that were not built with it.
• 10111845Mar 4, 2014Equipment, Electrical system. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using…
• 10247703Mar 1, 2014Other or unknown, Back-over prevention (rear camera). Removing / Disabling Rear Park Assist RPO UD7.
• 10247681Mar 1, 2014Equipment. Information On Requests To Add OnStar Bluetooth Option.
• 10245950Mar 1, 2014Equipment. Canadian Customers Unable To Place Calls In The United States
• 10245342Mar 1, 2014Electrical system. Removing / Disabling Rear Park Assist RPO UD7.
• 10065826Mar 1, 2014Engine cooling. Summary to be provided on a future date.
• 10138655Feb 28, 2014Visibility (wipers, defrost, mirrors), Equipment. This technical bulletin provides a procedure to install double sided tape to the windshield molding to correct the customers concern of a tapping or clicking noise at the winshield area.
• 10138651Feb 27, 2014Equipment, Fuel system. This informational bulletin explains the use of diesel fuel additives to remove water or enhance performance.
• 10111966Feb 26, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle.
• 10111964Feb 26, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have the OnStar system does not respond properly to some numbers and/or voice commands. Dealer should direct the customer to review the operational characteristics in the OnStar Users Guide.
• 10138646Feb 25, 2014Transmission and drivetrain, Engine, Equipment. This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
• 10138645Feb 25, 2014Transmission and drivetrain. This technical bulletin provides a procedure to install a 3-5-rev clutch housing inspection and repair to correct the customers concern of Slips in Reverse or Third, Delayed Reverse or Drive Engagement and MIL on.
• 10111959Feb 24, 2014Transmission and drivetrain. This Preliminary Information communication provides information to the technician about vehicles with a clunk type noise on start up with the vehicle in park when the vehicle is equipped Allison LCT1000 transmission. This condition is considered to be an operating characteristic of the Allison LCT1000 transmission.
• 10138640Feb 21, 2014Visibility (wipers, defrost, mirrors). This warranty bulletin explains how to determine if an outside mirrior was damaged by the customer and what is considered warranty and non-warranty.
• 10138639Feb 21, 2014Equipment, Wheels. This informational bulletin provides the technician the proper way to install and torque the wheel.
• 10138638Feb 21, 2014Wheels. This informational bulletin explains how to balance a chrome wheel without damaging the chrome face of the rim.
• 10138637Feb 21, 2014Wheels, Equipment, Tires. This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.
• 10138631Feb 18, 2014Tires, Wheels. This technical bulletin provides a procedure on cleaning a leaking rim, to correct a customers concern of having a slow tire leak and low tire psi message on.
• 10138630Feb 18, 2014Equipment, Tires. This informational bulletin explains the use of Nitrogen in GM tires.
• 10138629Feb 18, 2014Tires. This bulletin provides information regarding the normal tire wear condition of slight or mild tire feathering and recommended practices.
• 10138621Feb 17, 2014Equipment. This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
• 10111927Feb 12, 2014Brakes, Fuel system, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10138609Feb 10, 2014Equipment. The informational bulletin provides a procedure to remove and repair rust from a Hem Flange.
• 10111902Feb 6, 2014Equipment. This Preliminary Information communication advises the technician that the 2004-2007 Parallel Hybrid Truck parts will be placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10111894Feb 4, 2014Equipment. This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation…
• 10253174Feb 1, 2014Transmission and drivetrain. NQG 4WD Models With Noise Vibration On Dry Pavement.
• 10246591Feb 1, 2014Transmission and drivetrain. Slips in Reverse or Third, Delayed Reverse or Drive Engagement, DTC P0776, P2715,P2723, Harsh 2-3 Shifts (Inspect 1-2-3-4 / 3-5-R Housing and Pump Seal Rings)
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10137784Jan 31, 2014Equipment. This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
• 10112013Jan 22, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10112006Jan 21, 2014Brakes. This Preliminary Information communication provides information to the technician about vehicles that a driveline noise or vibration at various speeds and operating conditions. Technician should be advised that the vehicle should always be restored to a factory configuration when diagnosing noise and vibration concerns.

← All problems reported for the 2007 Chevrolet Silverado 1500