2014 Chevrolet Silverado 1500 Technical Service Bulletins

3,030 technical service bulletins (TSBs) are on record for the 2014 Chevrolet Silverado 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10138623Feb 17, 2014Equipment. This informational bulletin provides information on part restriction and ordering of Onstar vehicle communication modules.
• 10138621Feb 17, 2014Equipment. This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
• 10111933Feb 14, 2014Engine cooling, Equipment. This Preliminary Information communication provides information to the technician about vehicles that the blower motor may be noisy or vibrate when running. This concern will only occur when the temperatures is below 32 degrees Fahrenheit and if the blower motor is removed while still cold, ice may be found on the blower motor cage. This concern could be caused by water leaking or snow ingestion into the…
• 10111927Feb 12, 2014Brakes, Fuel system, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10138613Feb 11, 2014Equipment, Electrical system. This preliminary information bulletin provides information explaining why the rings around the volume, menu, and temperature knobs of the center stack do not illuminate for early 2014 build.
• 10111920Feb 11, 2014Equipment, Electrical system. This Preliminary Information communication provides information to the technician about systems operate during a remote vehicle start event. Dual Zone Auto Regular Production Option Code (CJ2) Heater-Vent-Air Conditioning settings the Heater-Vent-Air Conditioning settings will remain set to the previous Heater-Vent-Air Conditioning settings when the ignition was turned off.
• 10111919Feb 11, 2014Electrical system, Steering. This Preliminary Information communication provides information to the technician about vehicles that may have hard or unable to rotate ignition key concern. When the concern is present the steering wheel will need to be rotated in either direction to alleviate the pressure between the steering column lock pin and lock plate. Please communicate to the customer this condition is a normal operating characteristic of…
• 10138609Feb 10, 2014Equipment. The informational bulletin provides a procedure to remove and repair rust from a Hem Flange.
• 10138606Feb 10, 2014Visibility (wipers, defrost, mirrors), Equipment. This warranty administration bulletion provides the dealer technician information and guidelines for claiming a windshield.
• 10138605Feb 10, 2014Equipment. This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
• 10067212Feb 10, 2014Equipment, Body and structure. 14002a - service update (revised net item information). This bulletin provides a service procedure to inspect and, if necessary, repair the appearance of underbody components on certain vehicles that may not meet gm appearance requirements for new vehicles. These vehicles may exhibit signs of premature surface degradation on certain underbody components.
• 10138604Feb 7, 2014Electrical system. This preliminary informational bulletin provides service information to the dealer technicians that the remote start will not work with the ONSTAR REMOTE Link applcation
• 10138601Feb 6, 2014Equipment, Transmission and drivetrain. This preliminary informational bulletin provides a procedure to inspect the transmissions filter for splits or cracks to correct the customers concern for no forward, reverse or slips.
• 10111907Feb 6, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an inoperative RKE operation and the horn/wipers will be stuck in the "on" position. Technician may find Diagnostic Trouble Code B101D sys F0 set in the Body Control Module. Technician should clear the Diagnostic Trouble Code. If the B101D SYM F0 resets ensure the Body Control Module is awake open the driver?s…
• 10111906Feb 6, 2014Equipment. This Preliminary Information communication provides information to the technician about installing GM Accessory Chrome Tow Hooks. Technician will need to remove the grill and grille on GMC vehicles and Chevrolet built in Ft. Wayne, 11th Vehicle Identification Number Position (Z). For Chevrolet built in Silao, 11th Vehicle Identification Number Position (G) do not remove the driver's side bolt, loosen the tow hook…
• 10111901Feb 5, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an inoperative RKE operation and the horn/wipers will be stuck in the "on" position. Technician may find Diagnostic Trouble Code B101D sys F0 set in the Body Control Module. Technician should clear the Diagnostic Trouble Code. If the B101D SYM F0 resets ensure the Body Control Module is awake open the driver?s…
• 10111897Feb 4, 2014Engine, Equipment. This Preliminary Information communication provides information to the technician about vehicles that have extended or long crank time during cold ambient air temperatures. Direct Injection systems run at higher pressures, and the mechanical pump on the engine must build up the required pressure before the first injection event occurs. Direct Injection engines may have slightly longer cold crank times than that of…
• 10111894Feb 4, 2014Equipment. This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation…
• 10111893Feb 4, 2014Fuel system, Engine. This Preliminary Information communication provides information to the technician about vehicles that have an engine extended or long crank time during ambient air temps of ?18° Celsius (0° Fahrenheit) or colder when using E85 fuel. Technician will need to use Global Diagnostic System 2 to determine the actual ethanol content of the fuel. Adding regular fuel to the tank may help resolve the concern.
• 10253622Feb 1, 2014Latches, locks and linkages. Rear Doors Intermittently will not Open from Inside.
• 10252889Feb 1, 2014Electrical system. Engineering Information.
• 10252886Feb 1, 2014Engine cooling. Engineering Information.
• 10250084Feb 1, 2014Wheels. Refinishing Aluminum Wheels
• 10250080Feb 1, 2014Visibility (wipers, defrost, mirrors). Air Conditioning Odor
• 10250008Feb 1, 2014Fuel system. Identifying Non-GM ECM Calibration Use and Power-Up Hardware Detection in Duramax® Diesel Engines Using GDS 2
• 10246854Feb 1, 2014Equipment. Key Off Radio Operation.
• 10246827Feb 1, 2014Equipment. Service Update for Inventory and Customer Vehicles Underbody Appearance Expires with Base Warranty
• 10246621Feb 1, 2014Equipment. Car and Truck Fix it Right the First Time Issues
• 10246571Feb 1, 2014Wheels. Refinishing Aluminum Wheels
• 10246567Feb 1, 2014Visibility (wipers, defrost, mirrors). Air Conditioning Odor
• 10246495Feb 1, 2014Back-over prevention (rear camera), Fuel system. Identifying Non-GM ECM Calibration Use and Power-Up Hardware Detection in Duramax® Diesel Engines Using GDS 2
• 10190932Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10190931Feb 1, 2014Equipment, Wheels. Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes…
• 10073749Feb 1, 2014Engine. Summary to be provided on a future date.
• 10073709Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10073254Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10070192Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10070181Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10070158Feb 1, 2014Equipment. Summary to be provided on a future date.
• 10070134Feb 1, 2014Transmission and drivetrain. Summary to be provided on a future date.
• 10137784Jan 31, 2014Equipment. This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
• 10112046Jan 31, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have an intermittent crank / no start concern. Technician may find a Diagnostic Trouble Code in the Engine Control Module P1682. Technician will need to follow published Service Information diagnostics for the Diagnostic Trouble Code.
• 10112045Jan 31, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
• 10112044Jan 31, 2014Equipment, Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have a Diagnostic Trouble Code B263A sym 04 set in the Body Control Module. Technician should ignore Diagnostic Trouble Code B263A sym 04, it will not cause any customer-related complaints.
• 10112042Jan 30, 2014Other or unknown, Seat belts. This Preliminary Information communication advises the technician that the Rear Safety Belt Child Comfort Guide Kits are available from Customer Care and Aftersales parts as part number 20944862.
• 10112039Jan 30, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have an engine running hot or overheating with no coolant leaks found. Technician will need to check for hydrocarbons in the cooling system, operation of the thermostat, the water pump impeller for any sign of concern, and inspect the coolant manifold assembly and issues. Technician will need to replace the coolant…
• 10112038Jan 29, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have an EZ Lift and Lower tailgate opens too quickly. If the tailgate opens within approximately 2-6 seconds, no repairs should be made.
• 10112037Jan 29, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that a pop noise when the tailgate is opened. Technician will need to re-torque the tailgate dampener mounting nut.
• 10061084Jan 29, 2014Engine cooling. Summary to be provided on a future date.
• 10112034Jan 28, 2014Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have slack in one of the tailgate cables. Technician should not replace any parts for this concern. Please communicate to the customer this condition is a normal operating characteristic of their vehicle.

← All problems reported for the 2014 Chevrolet Silverado 1500