2017 Chevrolet Silverado 1500 Technical Service Bulletins

1,288 technical service bulletins (TSBs) are on record for the 2017 Chevrolet Silverado 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10216369Jun 17, 2022Brakes. This Preliminary information communicates the location of the GM Accessory Performance Brake System Rotor Specifications
• 10214869Jun 15, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10214858Jun 15, 2022Transmission and drivetrain. This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
• 10214859Jun 14, 2022Visibility (wipers, defrost, mirrors). This technical bulletin provides a procedure to install a pice of foam between the heater core pipes to correct the customers concern.
• 10216361Jun 13, 2022Visibility (wipers, defrost, mirrors). This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10214501Jun 6, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10213700Jun 1, 2022Equipment, Steering. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10213818May 31, 2022Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
• 10213258May 27, 2022Other or unknown. This informational bulletin provides explanation of a normal condition of a loose fitting ball receiver in the gooseneck.
• 10213816May 26, 2022Fuel system. This Preliminary information communicates provides information to the technician on the use of R-99 or R-95 Renewable diesel fuel.
• 10213255May 25, 2022Engine, Equipment. This bulletin provides information on common diesel engine tick noises and how they are considered part of normal operation and no parts should be replaced for these normal operating conditions.
• 10213252May 19, 2022Equipment. This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires.
• 10213032May 19, 2022Transmission and drivetrain. This Technical bulletin provides a repair to correct a condition of Shudder/Surging While Driving.
• 10213007May 18, 2022Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10213036May 16, 2022Fuel system, Engine cooling, Brakes, Wheels. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
• 10213022May 16, 2022Equipment. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10213796May 12, 2022Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10212908May 12, 2022Engine cooling. This informational bulletin explains the normal noises an engine may make when the ambient temperature outside is cold or the vehicle has sat for a few hours.
• 10212910May 11, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10211684May 6, 2022Transmission and drivetrain. This service bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares.
• 10211658May 2, 2022Engine, Equipment. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
• 10211070Apr 28, 2022Transmission and drivetrain. This technical bulletin provides a procedure to clear the codes and test the Tcase if found that the customer has tried to shift the t-case from 4lo to Hi gears while driving.
• 10211061Apr 27, 2022Engine cooling. This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10210849Apr 20, 2022Engine cooling. This technical bulletin provides a procedure to replace the camshaft actuator magnet to correct customer concerns of engine related shudder.
• 10210841Apr 20, 2022Equipment. This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
• 10211770Apr 19, 2022Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10211769Apr 19, 2022Electrical system. This Preliminary Information communication provides information to the technician with the correct way to remove the front shock electrical connector terminals. Technician will need to slightly bend the end of the J-38125-12A release tool. There is a purple Terminal Position Assurance that will align itself in the release position when the release tool is inserted into the release hole.
• 10211765Apr 13, 2022Electrical system. This Preliminary Information communication provides information to the technician with the correct way to remove the front shock electrical connector terminals. Technician will need to slightly bend the end of the J-38125-12A release tool. There is a purple Terminal Position Assurance that will align itself in the release position when the release tool is inserted into the release hole.
• 10211764Apr 13, 2022Body and structure. This Preliminary Information communication provides information to the technician about vehicles that may have slack in one of the tailgate cables. Technician should not replace any parts for this concern. Please communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10210543Apr 13, 2022Equipment. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10210441Apr 7, 2022Body and structure. This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10210194Apr 5, 2022Other or unknown. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10209980Mar 31, 2022Engine cooling. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10209977Mar 30, 2022Equipment. This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
• 10209953Mar 29, 2022Engine cooling. This service bulletin provides a procedure to repair the valve lifter oil manifold and/or lifters to correct the customers concern of engine misfire, ticking noise and/or MIL Illuminated.
• 10210348Mar 28, 2022Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10209743Mar 25, 2022Wheels, Equipment. This bulletin updates the position of General Motors on refinishing fully color painted aluminum wheels with base paint. GM has established a new process for the way that refinishing under GM Warranty will be handled (U.S. ONLY).
• 10209921Mar 22, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10209741Mar 22, 2022Fuel system, Engine cooling. This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
• 10209734Mar 22, 2022Equipment, Fuel system. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
• 10209465Mar 16, 2022Engine cooling, Fuel system. This informational bulletin explains the difference in AFM and DFM engines and what is and is not activated during this occurrence.
• 10209138Mar 10, 2022Electrical system. This technical bulletin provides a procedure for testing the battery cables for voltage drop, Checking for a bad ground at g218, Inspecting for a short at the starter B+ to shield and testing for a faulty battery.
• 10209136Mar 10, 2022Equipment, Body and structure. This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
• 10210321Mar 7, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10210319Mar 7, 2022Equipment. This Preliminary information communicates information on how dealers can contact the supplier for Associated Accessories offered through GM.
• 10209097Mar 3, 2022Transmission and drivetrain, Brakes, Electrical system. This service bulletin informs the technician to inspect for a possible electrical concern at the ECM X2 electrical connector to correct a customer concern of Malfunction Indicator Lamp (MIL) Illuminated - DTC P0333 Set.
• 10209122Mar 2, 2022Engine cooling. Information bulletin explains a possible coolant leak coming from the cylinder head bolt areas.
• 10208991Feb 24, 2022Electrical system. This Preliminary information communicates a process to correct the concern of Unable to contact OnStar after the 3G EOL on 2015-2022 model year vehicles in the United States.
• 10208971Feb 3, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10213766Jan 28, 2022Equipment. This Warranty Administration bulletin provides information on Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program Information.

← All problems reported for the 2017 Chevrolet Silverado 1500