2011 Chevrolet Suburban 1500 Technical Service Bulletins

348 technical service bulletins (TSBs) are on record for the 2011 Chevrolet Suburban 1500. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10171878Jan 2, 2020Fuel system, Equipment. This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
• 10154297Feb 14, 2019Fuel system. This Preliminary information communicates to the dealer an issue where the vehicle's inspection and maintenance monitors along with diagnostic trouble codes may reset unprompted due to the installation of an aftermarket fuel pump control module.
• 10190338Oct 1, 2017Equipment. Essential Tools that Include Consumable Parts (U.S. Only)
• 10190337Oct 1, 2017Suspension. Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
• 10190320Oct 1, 2017Electrical system, Equipment. IPC Odometer Programming Method Quick Reference Guide
• 10113383Feb 20, 2017Equipment. 44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
• 10082412Aug 31, 2016Electrical system. This technical bulletin provides a procedure to check the cylinders for damaged pistons and determine if the use of aftermarket calibrations or performance parts may be the cause.
• 10083241Aug 30, 2016Electrical system. This preliminary information communication provides information to the technician about the use of j-35616-64b terminal test probe, replacement terminals, and terminated leads. The j-35616-64b is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (j-38125-620h) located in lear tray 7 part number 963716-2.
• 10082869Aug 29, 2016Engine. This informational bulletin provides additional information on how to install pistons and suggest what tools to use.
• 10082506Aug 26, 2016Equipment. This technical bulletin provides a procedure to reprogram the media disc player with the latest calibrations to correct a condition of the rear entertainment system not operating as intended in colder ambient temperature areas due to calibration concerns.
• 10083080Aug 15, 2016Engine cooling. This preliminary information communication provides information to the technician about vehicles that may have low oil pressure message. Technician may also find a diagnostic trouble code p0521 in the engine control module. Technician should follow all published service information diagnosis.
• 10082865Aug 15, 2016Seat belts. This preliminary informational bulletin provides a procedure to reposition the front seat belt latch plate for concerns regarding the seat belt webbing or latch plate coming twisted.
• 10082822Aug 12, 2016Electrical system, Engine. This informational bulletin provides information on how to test a battery and what is needed to warranty a battery.
• 10082363Aug 12, 2016Equipment. This warranty administration bulletin provide policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10082447Aug 8, 2016Engine cooling. This informational bulletin explains a possible normal whining noise from the balance shaft chain if the vehicle has less than 10,000 miles on it.
• 10082860Aug 3, 2016Equipment. This informational bulletin provides information on gm does not approve the use of “clipping” to repair collision damage to vehicles. Gm has not tested or validated a “clipped vehicle” repair; therefore, gm cannot endorse this type of repair or confirm the crash performance during a subsequent collision.
• 10082861Aug 2, 2016Electrical system. This technical bulletin provides a procedure to remove the transport mode on message displayed in the dic due to vehicles shipped over long distances outside the u.s. And canada.
• 10082823Aug 2, 2016Engine cooling. This informational bulletin explains the use of diesel fuel additives in an engine, are not required unless the customer desires additives to prevent fuel concerns depending on fuel or temperature related conditions.
• 10082814Aug 2, 2016Engine. This informational bulletin provides information to gm dealers on the correct cleaning methods when cleaning engine gasket sealing surfaces.
• 10082820Aug 1, 2016Engine. This informational bulletins provides information on the intake manifold inspection/replacement after servere internal engine damage.
• 10089121Jun 29, 2016Tires, Equipment. This informational bulletin provides guidance to gm dealers when using gm approved tire force variation measurement equipment.
• 10078571May 1, 2016Equipment. This informational bulletin provide information on the product quality center (pqc) assembly replacement process.
• 10078569May 1, 2016Fuel system, Other or unknown. This informational bulletin provides information on vehicles designed to operate on gaseous fuels.
• 10083898Apr 27, 2016Equipment, Electrical system. This preliminary information communication advises the technician if unable to place an onstar call in the ignition on mode after the onstar canada upgrade, to contact the gm technical assistance center onstar group for further assistance.
• 10083513Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.
• 10078745Apr 27, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern of receiving frequent "off route" messages while following turn by turn (tbt) route navigation. The technician is provided instructions for resetting the vehicle communication interface module for this concern.
• 10083781Apr 22, 2016Electrical system. This preliminary information communication advises the technician on the steps to diagnose the concern, and the steps to repair the concern of the vehicle cranks but does not start. The technician is to inspect for a sheared cam pin in the engine.
• 10078545Apr 22, 2016Equipment. This technical bulletin provides a procedure to replace the propeller shaft with a revised part when a broken propeller shaft or u-joint is found.
• 10083509Apr 21, 2016Equipment. This preliminary information communication advises the technician on the steps to diagnose and repair the concern. The vehicle's xm radio only has xm preveiw channels.
• 10083482Apr 21, 2016Equipment. This preliminary information communication advises the technician to diagnose the concern and the steps to repair the concern. The vehicle's xm travel link may be inopertive.
• 10078522Apr 20, 2016Equipment. "this technical bulletin provides a procedure to contact onstar for hard mute request to correct a customer concern when the radio is on, it does not mute enough when the onstar® turn-by-turn navigation directions are announced due to customer improperly setting the radio volume high enough when the turn-by-turn navigation messages are played. "
• 10078520Apr 20, 2016Electrical system. This informational bulletin provides information that may be useful on diagnosing batteries that have set for a long period of time and/or set in cold weather climates and testing those batteries.
• 10083884Apr 19, 2016Equipment. This preliminary information communication advises the technician on the steps for diagnosing the concern. The vehicle may be unable to connect to onstar using the white, blue or red onstar buttons.
• 10083489Apr 19, 2016Equipment. This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer is to call general motors technical assistance center for further assistance if the concern is still present.
• 10083484Apr 19, 2016Electrical system. This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
• 10078735Apr 19, 2016Electrical system. This preliminary information communication provides information to help the dealership technicians perform a parasitic drain test for the onstar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the onstar system.
• 10078734Apr 19, 2016Electrical system. This preliminary information communication advises the technician the steps on repairing the concern. A customer may identify a concern of unable to reactivate a vehicle's onstar that has been previously disabled by onstar. Dealer is to call general motors technical assistance center for further assistance if the concern is still present.
• 10078507Apr 18, 2016Electrical system, Equipment. This warranty administration bulletin provide policy information on using the el-50313 midtronics gr8 battery tester/charger for diagnosing battery replacements and maintaining batteries on new vehicles in dealer inventory.
• 10078506Apr 18, 2016Electrical system. This informational bulletin provides warranty information on using the service programming system (sps) for programming control modules
• 10078504Apr 18, 2016Engine. This informational bulletin provides information internal engine noise or damage after oil filter replacement
• 10078502Apr 15, 2016Equipment. This warranty administration bulletin provides information on gm’s policy on performing gm covered vehicle services and maintenance on vehicles originating/sold in canada.
• 10078481Apr 12, 2016Equipment. This informational bulletin provides information on the purpose of magnetic drain plugs.
• 10078472Apr 12, 2016Visibility (wipers, defrost, mirrors). This informational bulletin provides information on a normal condition on tempered glass of spots showing on the rear and side windows when the vehicle is in the sunlight.
• 10083900Apr 8, 2016Equipment, Electrical system. This preliminary information communication advises the technician, if unable to place an onstar call in the ignition on mode after the onstar canada upgrade to contact the gm technical assistance center onstar group for further assistance.
• 10078435Apr 7, 2016Equipment, Body and structure. This preliminary informational bulletin provides information that may be helpful when addressing underbody component corrosion with customers.
• 10083512Apr 5, 2016Visibility (wipers, defrost, mirrors), Equipment. This preliminary information communication advises the technician the steps on diagnosing the concern. Vehicle's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10078604Apr 5, 2016Electrical system, Body and structure, Visibility (wipers, defrost, mirrors). This preliminary information communication advises the technician the steps on diagnosing the concern. Vehicle's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10078434Apr 1, 2016Transmission and drivetrain. This informational bulletin provide information on the operating characteristics of a manual transmission.
• 10078430Apr 1, 2016Steering. "this technical bulletin provides a procedure to inspect the steering gear for a normal condition of grease or sealant on exterior case of gear due to the manufacturing process."
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…

← All problems reported for the 2011 Chevrolet Suburban 1500