2013 Chevrolet Suburban Technical Service Bulletins

1,761 technical service bulletins (TSBs) are on record for the 2013 Chevrolet Suburban. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10222732Sep 13, 2022Engine cooling. This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10222650Sep 9, 2022Engine cooling. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 10222649Sep 9, 2022Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10222205Sep 9, 2022Engine cooling. This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
• 10224273Sep 1, 2022Transmission and drivetrain. This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
• 10220319Sep 1, 2022Transmission and drivetrain. This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
• 10220308Sep 1, 2022Equipment. This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
• 10219277Aug 26, 2022Engine cooling. This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10219284Aug 25, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10219278Aug 22, 2022Equipment. This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
• 10219266Aug 15, 2022Engine cooling. This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
• 10218873Aug 10, 2022Fuel system, Engine cooling. This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
• 10217048Jul 18, 2022Equipment. This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
• 10217764Jul 5, 2022Equipment, Brakes, Electrical system. This Preliminary information communicates direction and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC.
• 10217762Jul 1, 2022Tires, Equipment. This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
• 10215643Jun 27, 2022Equipment, Engine cooling, Visibility (wipers, defrost, mirrors). This service bulletin provides information to dealership personnel on a new refrigerant (R1234yf) for A/C service.
• 10216372Jun 22, 2022Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10215626Jun 21, 2022Equipment. This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
• 10214869Jun 15, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10216361Jun 13, 2022Visibility (wipers, defrost, mirrors). This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10214501Jun 6, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10213700Jun 1, 2022Equipment, Steering. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10213818May 31, 2022Body and structure. This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
• 10213816May 26, 2022Fuel system. This Preliminary information communicates provides information to the technician on the use of R-99 or R-95 Renewable diesel fuel.
• 10213252May 19, 2022Equipment. This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires.
• 10213007May 18, 2022Transmission and drivetrain. This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
• 10213036May 16, 2022Fuel system, Engine cooling, Brakes, Wheels. This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
• 10213022May 16, 2022Equipment. This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
• 10213796May 12, 2022Electrical system. This Preliminary Information communication provides information to the technician about vehicles that the speedometer needle appears to be inaccurate. Dealer should advise the customer the specification for speedometer needle accuracy is +/- 2 MPH at any given speed when looking straight at the needle.
• 10212910May 11, 2022Wheels. This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
• 10211658May 2, 2022Engine, Equipment. This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
• 10211061Apr 27, 2022Engine cooling. This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
• 10211770Apr 19, 2022Visibility (wipers, defrost, mirrors). This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
• 10210543Apr 13, 2022Equipment. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10210441Apr 7, 2022Body and structure. This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
• 10210194Apr 5, 2022Other or unknown. This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
• 10209980Mar 31, 2022Engine cooling. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
• 10209743Mar 25, 2022Wheels, Equipment. This bulletin updates the position of General Motors on refinishing fully color painted aluminum wheels with base paint. GM has established a new process for the way that refinishing under GM Warranty will be handled (U.S. ONLY).
• 10209921Mar 22, 2022Engine cooling. This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
• 10210324Mar 9, 2022Air bags. This Preliminary information communicates information on a parts restrictions for the passenger air bag.
• 10210321Mar 7, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10208971Feb 3, 2022Wheels, Tires. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
• 10213762Jan 28, 2022Equipment. This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10208067Jan 28, 2022Engine cooling. This Preliminary Information communication provides steps the technician will uses to diagnose and repair vehicles that have low oil pressure after an oil change with the engine Regular Production Option Code L20, L77, L94, L96, L99, L9H, LC8, LC9, LH9, LMF, LMG, LY6, or LZ1. Vehicle may have Service Engine Soon lamp with Diagnostic Trouble Code P0521 or Low Oil Pressure message on the instrument panel. Dealer will…
• 10213768Jan 27, 2022Equipment, Body and structure. This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.
• 10213765Jan 27, 2022Fuel system, Other or unknown. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
• 10213761Jan 27, 2022Back-over prevention (rear camera). This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10208055Jan 25, 2022Air bags. This Preliminary information communicates information on a parts restrictions for the passenger air bag.
• 10208053Jan 24, 2022Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10212607Jan 19, 2022Exterior lighting, Fuel system. This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.

← All problems reported for the 2013 Chevrolet Suburban