2019 Chevrolet Trax Technical Service Bulletins

676 technical service bulletins (TSBs) are on record for the 2019 Chevrolet Trax. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10169357Nov 26, 2019Equipment. This informational bulletin provides information on key code security rules and information on GM keycode look-up applications.
• 10169355Nov 25, 2019Equipment. This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
• 10169356Nov 12, 2019Equipment, Wheels, Tires. This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion.
• 10169354Nov 12, 2019Equipment, Exterior lighting. This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
• 10169300Nov 12, 2019Body and structure, Equipment. This technical bulletin provides repair information to correct a customer concern of a musty odor, wet carpet and/or water leaking on the driver side floor.
• 10169265Nov 12, 2019Electrical system. This technical bulletin provides repair information to correct a customer concern of Malfunction Indicator Lamp (MIL) illuminated, intermittent service messages, Erratic Gauges and technician finding DTCs U0073, U0121, U0100 and/or U0101 set.
• 10168212Oct 29, 2019Transmission and drivetrain. This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
• 10168207Oct 16, 2019Equipment. This informational bulletin provides information for dealers how to submit a product information report (PIR) (Canada Only).
• 10168175Oct 14, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10167436Oct 14, 2019Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. The technician may find Diagnostic Trouble Codes P0299 or P0234 set. The technician is provided with a list of causes of misdiagnosis leading to returned Turbochargers with no trouble found.
• 10168186Oct 10, 2019Equipment. This informational bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
• 10168208Oct 9, 2019Equipment. This informational bulletin provides information on key code security and information on GM key code look up applications.
• 10168205Oct 9, 2019Engine cooling. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10168204Oct 2, 2019Equipment. This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
• 10168188Oct 2, 2019Equipment. This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA) (US dealers only).
• 10165904Sep 25, 2019Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10166638Sep 18, 2019Equipment. This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
• 10165885Sep 11, 2019Electrical system. This Preliminary information communicates the possible setting of B101D-39 in the OnStar module and advises of over the air software update to resolve the concern.
• 10165882Sep 10, 2019Body and structure. This Preliminary information communicates to the dealer that during the PDI if they notice Insufficient hood to fender clearance to adjust the hood as needed.
• 10166624Sep 6, 2019Electrical system. This technical bulletin provides repair information to correct a customer concern of Intermittent OnStar Inoperative, DTC B101D-39, Red LED and Clock Date Time Inaccurate.
• 10165127Aug 23, 2019Electrical system. This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961).
• 10165087Aug 23, 2019Equipment. This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
• 10165089Aug 20, 2019Engine cooling. This technical bulletin provides a procedure to repair the mechanical components and then be sure to reprogram the throttle body to prevent the conditions of a rough running engine, MIL On from happening again.
• 10165126Aug 19, 2019Equipment. This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC.
• 10165121Aug 15, 2019Engine cooling. This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
• 10165122Aug 13, 2019Engine cooling. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
• 10165123Aug 12, 2019Transmission and drivetrain. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
• 10165079Aug 5, 2019Steering. This technical bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
• 10163900Jul 26, 2019Equipment. This informational bulletin provides process information for the (GWM) and (WPC) parts return program.
• 10163894Jul 25, 2019Air bags. This technical bulletin provides a procedure to remove the driver front seat outboard seat back airbag and re-seat the CPA clip for the airbag.
• 10163679Jul 25, 2019Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0171 and or P1101 set. Technician will need to inspect the Air Cleaner Housing. If the air cleaner housing does not have the correct content for the engine application as shown, dealer is instructed to replace the Air Cleaner…
• 10163272Jun 26, 2019Equipment. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
• 10163268Jun 26, 2019Equipment, Electrical system. This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
• 10163261Jun 26, 2019Fuel system. This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
• 10162162Jun 26, 2019Body and structure. This Preliminary information communicates to the dealer that during the PDI if they notice Insufficient hood to fender clearance to adjust the hood as needed.
• 10163260Jun 25, 2019Equipment. This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
• 10163193Jun 25, 2019Equipment. This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
• 10162124Jun 13, 2019Electrical system. This Preliminary Information communication provides information to the technician about a no start or another concern after swapping an Engine Control Module or other modules from one vehicle to another. The Global Architecture electrical system associated with these vehicles does not allow controller swaps between vehicles.
• 10163263Jun 11, 2019Electrical system, Equipment. This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
• 10163237Jun 10, 2019Engine cooling. This informational bulletin provides information for dealers/technicians and customers on steam/vapor coming from the front grille or radiator area.
• 10163215Jun 6, 2019Transmission and drivetrain. This Bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns.
• 10164096Jun 3, 2019Wheels, Suspension, Steering. A192221650 - Service Update Bulletin. Certain vehicles may not have had a wheel alignment performed after receiving a strut replacement at the port. If a wheel alignment was not performed, the vehicle could pull slightly to one side and/or the steering wheel may be off center. Dealers are to perform a front end alignment.
• 10162107Jun 3, 2019Brakes. This Preliminary Information communication provides information to the technician about vehicles that had the Brake Pressure Modulator Valve now Diagnostic Trouble Code C0131 is set current. Technician should remove Brake Pressure Modulator Valve assembly and inspect the brake pressure sensor assembly to ensure all shipping material has been removed before installation.
• 10161880May 29, 2019Latches, locks and linkages, Body and structure. This informational bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
• 10161932May 21, 2019Engine cooling. This informational bulletin advises of a new fuel injection kit used for decarbonizing the intake valves, and explains how toptier fuels should be used to reduce carbon build up.
• 10161968May 20, 2019Transmission and drivetrain. This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
• 10161037May 20, 2019Equipment. This Preliminary information communicates that a customer may complain of when a Bluetooth call is received the ringing will be continuous for the rest of the drive cycle . It may be noted that this only seems to occur when using an Android device on OS 9.0. This may be caused by a software concern in the phone. The dealer is instructed that the phone manufacturer is working on a software update to resolve the…
• 10161925May 15, 2019Electrical system. This informational bulletin provides information to the tech to test the PCV for proper performance before replacing the camshaft cover to correct a MIL On w/DTC P0171.
• 10161924May 15, 2019Electrical system. This technical bulletin provides a procedure to repair a possible short in the wiring harness where it enters through the bulkhead to correct Erratic IPC and Gauge Readings, an MIL and DTCs.
• 10161902May 15, 2019Electrical system, Engine. This informational bulletin provides information to the tech to test the PCV for proper performance before replacing the camshaft cover to correct a MIL On w/DTC P0171.

← All problems reported for the 2019 Chevrolet Trax