1997 Chrysler Cirrus Recalls

NHTSA lists 4 recall campaigns for the 1997 Chrysler Cirrus. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 04V021000Jan 13, 20042,315,768 vehicles potentially affected
  Power train › Automatic transmission › Lever and linkage › Floor shift
  Covers: Chrysler Cirrus 1995–1999, Dodge Intrepid 1993–1999, Chrysler Concorde 1993–1999 +6 more

  Reported issue: On certain passenger vehicles, the floor shifter ignition-park interlock may fail and allow the shifter to be moved out of the park position with the key removed. An inoperative interlock may also allow the key to be removed when the shifter has not been placed in the park position.

  Possible consequence: Either circumstance may result in the vehicle rolling away without warning.

  Remedy: Dealers will install a new load-limiting push rod into the floor shifter lever of the affected vehicles. Owner notification began on june 14, 2004. Owners should contact daimlerchrysler at 1-800-853-1403.

  Full campaign details →

• 98V183000Aug 6, 1998685,000 vehicles potentially affected
  Power train › Automatic transmission › Park/neutral start interlock switch
  Covers: Chrysler Cirrus 1995–1998, Dodge Stratus 1995–1998, Chrysler Sebring 1996–1998 +1 more

  Reported issue: Vehicle description: passenger vehicles equipped with automatic transmissions. The adjustment of the cable connecting the console shifter mechanism to the ignition key can cause a trapped key condition which can result in a low force required to depress the shift button. A combination of applying a mis-adjusted release button with a low force attempt to shift out of park with the key in the locked position, can…

  Possible consequence: If this happens, the "ignition-park" interlock system will be nonfunctional.

  Remedy: Dealers will inspect for proper operation of the system. Any vehicles that are not functional after the inspection will have the shift mechanism and cable replaced with a "self-adjusting" design.

  Full campaign details →

• 97V201000Nov 13, 1997599,000 vehicles potentially affected
  Suspension › Front › Control arm › Lower ball joint
  Covers: Chrysler Cirrus 1995–1997, Dodge Stratus 1995–1997, Chrysler Sebring 1995–1997 +1 more

  Reported issue: Vehicle description: passenger vehicles. The lower control arm ball joint can separate due to loss of lubrication.

  Possible consequence: Separation of the ball joint could cause a loss of steering control increasing the risk of a vehicle crash.

  Remedy: Dealers will inspect the ball joint end housing cover seal for leakage with a high pressure air tester and the rubber boot will be visually inspected for damage. If the cover seal leaks or the boot is damaged, the lower control arm will be replaced.

  Full campaign details →

• 97V095000Jun 6, 1997219,000 vehicles potentially affected
  Structure › Body › Hood › Hinge and attachments
  Covers: Chrysler Cirrus 1996–1997, Dodge Stratus 1996–1997, Plymouth Breeze 1996–1997

  Reported issue: Vehicle description: passenger vehicles. The secondary hood latch spring can disengage from its retention hole if the hood is slammed shut.

  Possible consequence: If this condition occurs simultaneously without engaging the primary latch, the hood would not be restrained increasing the risk of a vehicle crash.

  Remedy: Dealers will replace the secondary hood latch spring with a longer end hook spring.

  Full campaign details →

NHTSA investigations

• EA99028Steering shaft bindingClosed · Sep 10, 1999
• PE99030Steering shaft bindingClosed · May 3, 1999
• EA97016Lower control arm ball joint failureClosed · Sep 29, 1997

← All problems reported for the 1997 Chrysler Cirrus