1993 Chrysler NEW Yorker Recalls

NHTSA lists 3 recall campaigns for the 1993 Chrysler NEW Yorker. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 99V215000Aug 9, 1999402,830 vehicles potentially affected
  Suspension › Front › Control arm › Lower arm
  Covers: Chrysler NEW Yorker 1993–1995, Eagle Vision 1993–1995, Dodge Intrepid 1993–1995 +2 more

  Reported issue: Vehicle description: passenger vehicles. The lower control arm attaching brackets can crack due to fatigue and separate from the engine cradle.

  Possible consequence: If this occurs, the transmission half-shaft could pull out of the transaxle and result in loss of power.

  Remedy: Dealers will reinforce the engine cradle at the point where the lower control arm attaches to it.

  Full campaign details →

• 98V184000Aug 6, 1998722,600 vehicles potentially affected
  Fuel system, gasoline › Fuel injection system
  Covers: Chrysler NEW Yorker 1993–1997, Eagle Vision 1993–1997, Dodge Intrepid 1993–1997 +3 more

  Reported issue: Vehicle description: passenger vehicles built with 3.5l engines. The fuel injection delivery system can leak fuel from some of the sealing o-rings or from hair line cracks in the thermoset fuel injection rail.

  Possible consequence: Fuel leakage in the presence of an ignition source can result in a fire.

  Remedy: Dealers will replace the fuel rail o-rings and reinforce the outlet (passenger) side fuel rail. Vehicles showing fuel leakage on the outlet fuel rail must have the outlet rail replaced which includes changing the upper and lower injector o-rings. However, if a vehicle is leaking fuel from the o-rings or from a…

  Full campaign details →

• 96V099000Jun 13, 1996321,000 vehicles potentially affected
  Service brakes, hydraulic › Antilock/traction control/electronic limited slip
  Covers: Chrysler NEW Yorker 1990–1993, Dodge Dynasty 1990–1993, Chrysler Imperial 1990–1993 +7 more

  Reported issue: The abs hydraulic control unit can experience excessive brake actuator piston seal wear causing pump-motor deterioration.

  Possible consequence: If this condition occurs, the abs function could be lost and reduced power assist would be experienced during vehicle braking increasing the potential for a vehicle accident.

  Remedy: Dealers will test the vehicle's anti-lock brake system and repair the vehicles if necessary. Also the warranty on all abs components will be extended to 10 years or 100,000 miles (except for the brake actuator piston assembly and the pump-motor assembly which will have a lifetime coverage). Owners will also be…

  Full campaign details →

NHTSA investigations

• PE93044Under body fuel leaksClosed · May 6, 1993

← All problems reported for the 1993 Chrysler NEW Yorker