1994 Ford Bronco Recalls

NHTSA lists 3 recall campaigns for the 1994 Ford Bronco. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 05V388000Sep 7, 20054,500,000 vehicles potentially affected
  Vehicle speed control
  Covers: Ford Bronco 1994–1996, F-150 1994–2002, F-250 1994–1999 +3 more

  Reported issue: On certain pickup trucks and sport utility vehicles equipped with speed control, the speed control deactivation switch may overheat, smoke, or burn.

  Possible consequence: A fire at the switch could occur.

  Remedy: By letter dated september 12, 2005, owners were instructed to return their vehicles to their dealers to have the speed control deactivation switch disconnected. Owners who have had their speed control deactivated are being notified that parts will be available and advised to make an appointment to reconnect the speed…

  Full campaign details →

• 94V169001Sep 7, 1994835,791 vehicles potentially affected
  Parking brake › Conventional
  Covers: Ford Bronco 1992–1994, F-250 1992–1994, F-150 1992–1994 +3 more

  Reported issue: The parking brake control self-adjust pawl does not line up properly with the self-adjust rachet causing the pawl to slip over one or more teeth in the rachet.

  Possible consequence: When the above occurs, it can result in parking brake system ineffectiveness. The parking brake will not hold the vehicle, causing the vehicle to roll freely, if the transmission is not left in gear.

  Remedy: A wedge will be installed which will serve to lock the parking brake self-adjust mechanism pawl into engagement with the rachet. Also, owners will be advised to release and reapply the parking brake whenever tooth skip occurs and will be reminded to always turn off the engine and leave the vehicle in gear when the…

  Full campaign details →

• 94V018000Jan 2, 1994370,000 vehicles potentially affected
  Structure › Body › Bumpers
  Covers: Ford Bronco 1993–1994, F-150 1993–1994, F-350 1993–1994 +2 more

  Reported issue: The u-clip style nuts that retain the front bumpers to the front bumper inner arms can fracture.

  Possible consequence: If one of the u-clip nuts fractures, the bumper will loosen and rattle causing fracture of the remaining u-clip nuts, resulting in separation of the bumper from the vehicle. If the bumper were to detach from the vehicle while it is being driven, a vehicle collision could result.

  Remedy: Inspection and replacement of the four u-clip nuts and the associated bolts.

  Full campaign details →

← All problems reported for the 1994 Ford Bronco