2018 Ford Ecosport Technical Service Bulletins

95 technical service bulletins (TSBs) are on record for the 2018 Ford Ecosport. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10160880May 6, 2019Equipment. Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S.
• 10159489Apr 26, 2019Equipment, Electrical system. Some 2013-2019 vehicles equipped with a EVDC air conditioning (A/C) compressor may exhibit poor A/C performance/improper climate function and/or a diagnostic trouble code (DTC) P06A0 in the powertrain control module (PCM). To support the proper diagnosis of this compressor, the EVDC control valve tester has been developed and is available from Rotunda (339-EVDC100). A tester has been provided to each U.S.
• 10156887Feb 22, 2019Electrical system. Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement.
• 10155575Feb 22, 2019Electrical system. Some 2015-2017 vehicles may experience a no crank concern due to a security access key table error. When attempting to program keys or perform a parameter reset, the procedure may fail and the Integrated Diagnostic System (IDS) scan tool may display an error 232: Key Table Not Allocated. If this error message is encountered, the Body Control Module (BCM) is internally faulted and requires replacement.
• 10156885Feb 21, 2019Electrical system. Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for…
• 10155573Feb 21, 2019Electrical system. Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for…
• 10156879Feb 12, 2019Electrical system. Some 2018 EcoSport vehicles equipped with a dealer installed remote start feature and built on or before 20-Mar-2018 may exhibit an intermittent illuminated wrench indicator lamp along with DTC P166A and a See Manual message on the information display in the instrument panel cluster (IPC). This may be due to the key takeover process being initiated during the remote start session.
• 10155567Feb 12, 2019Electrical system. Some 2018 EcoSport vehicles equipped with a dealer installed remote start feature and built on or before 20-Mar-2018 may exhibit an intermittent illuminated wrench indicator lamp along with DTC P166A and a See Manual message on the information display in the instrument panel cluster (IPC). This may be due to the key takeover process being initiated during the remote start session.
• 10153970Jan 17, 2019Electrical system, Transmission and drivetrain. Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition prior to programing remove the TCU fuse for 5 minutes then reinstall. Delete all previous session files for…
• 10153969Jan 17, 2019Equipment. Some 2012-2019 Vehicles may require repairs to the Smartlink system. Smartlink is a Ford Licensed Accessory which has a warranty provided by the accessory manufacturer. Warranty replacement parts for Smartlink that are ordered through Ford are not reimbursable through the Ford Motor Company warranty system. Please see the Warranty and Policy Manual for further information on Ford Licensed Accessories.
• 10153921Jan 7, 2019Equipment, Electrical system. Some 2018-2019 Ford and Lincoln vehicles equipped with a TCU may exhibit inoperative remote features via Ford Pass/Lincoln Way mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 or no modem electronic serial number (ESN) displayed. To correct this condition, remove the TCU fuse for 5 minutes prior to programing. Delete all previous session files for the vehicle and…
• 10153951Dec 19, 2018Equipment, Electrical system. Some 2018-2019 Escape, Transit Connect and EcoSport vehicles equipped with a keyed ignition and a factory invoiced accessory (FIA) VSS may exhibit intermittent alarm activation with lights flashing and the horn sounding after a loud noise and/or shockwave near the vehicle (ex. large truck passing, garage door slamming closed). The root cause of this concern may be an incorrect shock sensor sensitivity adjustment on…
• 10153918Dec 12, 2018Electrical system, Transmission and drivetrain. Some 2018-2019 EcoSport vehicles equipped with a 2.0L Duratec engine and an automatic transmission and built on 1-Sep-2017 and through 28-Nov-2018 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0137 and/or P0141. This may be due to a faulty catalyst monitor sensor (CMS) as well as powertrain control module (PCM) software. Follow the Service Procedure steps to…
• 10153931Dec 4, 2018Seats, Equipment. Some 2013-2018 C-Max, 2013-2019 Escape/Fusion/MKZ, 2015-2018 Focus, 2015-2019 Edge/F150/MKC/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017 Super Duty, 2018-2019 EcoSport/Expedition, and 2019 Nautilus vehicles may experience seat pan looseness, lateral movement, or clunk/thump noise on turns. Follow the Service Procedure steps to correct the condition.
• 10152480Nov 21, 2018Transmission and drivetrain. Some 2018 EcoSport vehicles equipped with a 1.5L Duratorq-TDCi engine may exhibit an illuminated MIL with DTC P061B. The 2018 Powertrain Controls/Emission Diagnosis (PC/ED) Diesel Manual, Section 4 is incorrect and a powertrain control module (PCM) replacement may not be necessary for this DTC. The PC/ED is in the process of being updated. Do not replace the PCM at this time. Engineering is investigating, monitor…
• 10152478Nov 21, 2018Visibility (wipers, defrost, mirrors), Electrical system. 2018-2019 EcoSport vehicles equipped with power windows may exhibit a loss of power window functionality after multiple rapid switch operations. This may be due the power window thermal protection feature, which makes the switch inoperable for a short period. This is a normal characteristic and no repairs should be attempted. Normal switch functionality should be restored after the window motors have cooled down.
• 10152470Nov 8, 2018Electrical system. Some 2018 EcoSport vehicles equipped with a 1.5L Duratorq-TDCi engine may exhibit issues when attempting to complete a programmable module installation (PMI) on the PCM. This may be due to software issues on the current version of the Ford scan tool. Make sure that the latest software level of the appropriate Ford diagnostic scan tool is installed before attempting this procedure.
• 10152464Nov 1, 2018Electrical system. When connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic…
• 10148738Oct 26, 2018Electrical system, Equipment. Some 2018 EcoSport vehicles equipped with a dealer installed remote start feature may exhibit an intermittent illuminated wrench indicator lamp along with DTC P166A and a See Manual message on the information display in the instrument panel cluster (IPC). This may be due to the key takeover process being initiated during the remote start session. Reprogram the body control module (BCM) using the Ford Diagnosis and…
• 10148733Oct 23, 2018Engine, Equipment. Some 2018-2019 EcoSport vehicles equipped with keyless entry and built on or before 24-Sep-18 may exhibit a no start condition with a Key Not Detected warning message in the instrument cluster. This may be due to either one or both key fobs not being completely programmed. Both key fobs should be reprogrammed before any further diagnostics are carried out. Refer to Workshop Manual (WSM), Section 419,01C.
• 10148730Oct 19, 2018Electrical system. Some 2018 EcoSport vehicles built on or before 1-Jun-2018 may exhibit the radio switching from FM radio to AM radio without input. Reprogram the audio control module (ACM) using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 18C869 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
• 10148728Oct 15, 2018Engine cooling, Equipment. 2014-2017 Fiesta, 2015-2018 Focus, 2018-2019 Ecosport vehicles equipped with a 1.0L EcoBoost engine may exhibit coolant consumption,white smoke and/or a runs rough condition. Refer to the extended coolant pressure test in Workshop Manual (WSM), Section 303-03. If no external coolant loss is confirmed, further investigation of the integrated exhaust manifold (IEM) interface is required. Carefully inspect the…
• 10148721Oct 4, 2018Electrical system. Some 2018-2019 EcoSport vehicles equipped with SYNC may experience a partial screen display during transport mode deactivation or when a SYNC master reset is performed. This may be due to system prioritization which causes the display to revert to a default 4 display rather than matching the original size of the vehicle display. To remedy the above condition, dealers are advised to turn the ignition to OFF and then…
• 10149763Sep 19, 2018Steering. Some 2018 EcoSport vehicles equipped with a rear parking aid camera may intermittently exhibit the active reverse guideline overlays not present on the front display interface module (FDIM) when reverse gear is selected. This may be due to the steering straight ahead position not stored into the power steering control module (PSCM). Reprogram the PSCM to GN15-14C217-AE or later using the latest version of the…
• 10144925Aug 31, 2018Transmission and drivetrain. Some 2018 EcoSport vehicles equipped with AWD and built on or before 12-Apr-2018 may exhibit a ratcheting/clicking type noise from the driveshaft area when reversing under certain load conditions. This may be due to the front U-joint on the driveshaft having a high working angle. Follow the Service Procedure steps to correct the condition.
• 10144947Aug 24, 2018Steering. When connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic…
• 10144930Aug 2, 2018Electrical system. Some 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 not at the latest software level may exhibit Various Performance Related concerns such as Display Operation, Navigation, Voice Recognition, Phone Pairing, Applink, Travel Link, Slow System Response, etc. Check for SYNC software update under the OASIS Tab SYNC selection. If an update is available refer to WSM, Section 415-00 and update the APIM software.
• 10144222Jul 27, 2018Engine, Latches, locks and linkages. Some 2018 EcoSport vehicles equipped with remote start may exhibit an intermittent remote start/stall condition during the first remote start attempt. Some 2018 EcoSport vehicles equipped with perimeter plus security and intelligent access (IA) with push button start may exhibit a false security trigger upon opening the rear tailgate while the system is armed. For vehicles exhibiting either concern, contact the…
• 10143103Jun 22, 2018Equipment, Electrical system. Some 2016-2018 Ford and Lincoln vehicles with SYNC 3 may exhibit an intermittent blue or black screen. Check for SYNC software update under the OASIS Tab SYNC selection. If update is available refer to WSM, Section 415-00 and update APIM software. After Installation Complete pop-up appears, remove USB flash drive and install into IDS tool to update Ford database. Perform a complete ignition cycle by turning the key…
• 10143102Jun 22, 2018Equipment, Electrical system. Various 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then…
• 10143094Jun 18, 2018Engine cooling, Electrical system. Some 2018 EcoSport vehicles equipped with a 1.0L EcoBoost engine and built on or before 20-Apr-2018 may exhibit an illuminated MIL with DTC P261A. This may be due to connector C1450 to the auxiliary electric coolant pump that cannot be fully seated. The connector/pig tail kit CU2Z-14S411-YA can be used to resolve the concern. For claiming, use causal part 14S411 and applicable labor operations in Section 10 of the…
• 10137148Apr 27, 2018Steering, Back-over prevention (rear camera). Some 2018 EcoSport vehicles equipped with rear parking aid camera may intermittently exhibit the active reverse guideline overlays not present on the front display interface module (FDIM) when reverse gear is selected. This may be due to the steering straight ahead position not stored into the power steering control module (PSCM). Operation of the active reverse guidelines are restored after the vehicle is driven…
• 10137139Apr 19, 2018Equipment. Some 2018 EcoSport vehicles equipped with remote start may exhibit an intermittent remote start/stall condition during the first remote start attempt. The vehicle should remote start normally after the second attempt. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.
• 10137136Apr 17, 2018Electrical system. Some 2018 EcoSport vehicles may exhibit a "Maintenance Set Date" message displayed on the IPC after the battery or IPC has been disconnected and reconnected. This message indicates that the vehicle clock/time needs to be adjusted. Proceed through SYNC and set the clock/time manually. If the clock/time shown is correct, change it to one minute after the current time and after a key cycle set the clock/time back to…
• 10137113Mar 30, 2018Equipment. Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems.
• 10137102Mar 21, 2018Equipment. Some 2016-2018 Ford and Lincoln vehicles equipped with SYNC 3 and connected to an iPhone recently upgraded to iOS 11.2.5 may exhibit functional concerns where USB audio playback and App Link will not operate. This may also include, under certain conditions, no Bluetooth streaming. Apple has released iOS 11.2.6 to address this concern. Advise the customer to update the device to iOS 11.2.6 and re-evaluate before…
• 10137071Mar 19, 2018Transmission and drivetrain. Some 2018 EcoSport vehicles equipped with a 2.0L Duratec engine built on 21-Sep-2017 and through 8-Nov-2017 may exhibit an illuminated MIL with diagnostic trouble code (DTC) P0125 at ambient temperatures between -6-0°C (20-32°F). Reprogram the powertrain control module (PCM) using the latest Ford Diagnosis aand Repair System (FDRS). Make sure you are connected to the internet when entering module programming to…
• 10137092Mar 14, 2018Electrical system. Some 2018 EcoSport vehicles equipped with a dealer installed remote start feature may exhibit an intermittent illuminated wrench indicator lamp along with DTC P166A and a See Manual message on the information display in the instrument panel cluster (IPC). This may be due to the key takeover process being initiated during the remote start session. Reprogram the body control module (BCM) using the Ford Diagnosis and…
• 10137086Mar 8, 2018Electrical system, Fuel system. Some 2018 EcoSport vehicles equipped with a 2.0L Duratec engine may exhibit an illuminated MIL and/or a wrench lamp with diagnostic trouble codes (DTCs) P025A, P0103 and U0109 all present. Inspect for loose connections or pin pushouts at fuse F47, F11 and fuel pump relay located in the battery junction box (BJB). Inspect ground point G300 under front seat for correct torque. If no faults are found in this area…
• 10188854Mar 1, 2018Electrical system. When using remote start through SYNC connect or with FIA, the powertrain malfunction lamp will illuminate.
• 10136596Feb 14, 2018Electrical system. Some 2018 EcoSport vehicles equipped with a Factory Invoiced Accessories (FIA)remote start feature or SYNC connect may exhibit an intermittent illuminated wrench indicator lamp along with diagnostic trouble code (DTC) P166A and a See Manual message on the information display in the instrument panel cluster (IPC). This may be due to the key takeover process being initiated during the remote start session. This DTC…
• 10136592Feb 9, 2018Electrical system. When connecting the Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) or Ford Diagnosis and Repair System (FDRS) to the DLC located on the driver side under the steering column at the GWM, make sure that the ignition is off before connecting the VCM. If the ignition is on or the engine is running during the connection, it can result in various warning lights being illuminated with diagnostic…
• 10140329Jan 24, 2018Equipment, Body and structure. For 2018 EcoSport vehicles without tailgate mounted spare tire, the four M4 (4.8x20mm) screws provided inside the loose items plastic bag are not suitable to attach the license plate to the tailgate. The license plate attachment to tailgate will require two M6 (6.3x16mm) screws which are not shipped with the vehicles. For these vehicles, use M6 screws, part number N807572-S439 (two required).
• 10138530Jan 24, 2018Body and structure. For 2018 EcoSport vehicles without tailgate mounted spare tire, the four M4 (4.8x20mm) screws provided inside the loose items plastic bag are not suitable to attach the license plate to the tailgate. The license plate attachment to tailgate will require two M6 (6.3x16mm) screws which are not shipped with the vehicles. For these vehicles, use M6 screws, part number N807572-S439 (two required).
• 10127415Nov 14, 2017Electrical system. Some 2018 EcoSport vehicles equipped with a Ford Accessory remote start feature may exhibit an illuminated wrench indicator along with a See Manual message on the information display in the IPC. This may be due to the key takeover process being initiated during the remote start session. Do not attempt any repairs at this time. Engineering is investigating, monitor OASIS for updates.

← All problems reported for the 2018 Ford Ecosport