2020 Ford Escape Hybrid Technical Service Bulletins

18 technical service bulletins (TSBs) are on record for the 2020 Ford Escape Hybrid. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11029931Mar 6, 2026Engine. Some 2020-2026 Escape and 2022-2026 Maverick 2.5L Duratec hybrid vehicles may require various repairs on the exhaust system. This may require removal of the exhaust heat exchanger. WSM, Section 309-00 Exhaust System > 2.5L Duratec hybrid > Removal and Installation > Exhaust Heat Exchanger has been revised to eliminate the need to remove the muffler assembly. The procedure steps and labor times have been updated to…
• 10252555Mar 19, 2024Transmission and drivetrain. This article supersedes TSB 23-2244 to add 2024 model year. Some 2020-2024 Escape hybrid vehicles equipped with a 2.5L (FHEV) full hybrid electric vehicle powertrain and 4-wheel drive (4WD) may exhibit a grinding or rubbing noise while braking at or below 10 mph (16 km/h) from the front of the vehicle. This may be due to an inadequate gap between the driveshaft and the heat shield.
• 10250298Feb 1, 2024Electrical system. 2020-2023 Escape/Explorer, 2021-2023 F-150 and 2022-2023 Maverick vehicles equipped with a full hybrid electric vehicle (FHEV) powertrain may exhibit a cable connection error screen from the Midtronics xRC-3363 High Voltage Battery Rescue Charger. The xRC-3363 will prompt the technician to verify the low voltage connections, when no actual fault is present. This may be due to the software level of the Midtronics…
• 10249424Jan 24, 2024Engine cooling, Electrical system. Some 2020-2023 Escape, 2021-2023 Corsair vehicles equipped with 2.5L engine full hybrid electric vehicle (FHEV) and plug-in hybrid electric vehicle (PHEV) powertrain and 2022-2023 Maverick vehicles equipped with 2.5L engine FHEV powertrain may exhibit a condition where the 12V battery voltage is low or discharged with diagnostic trouble code (DTC) U3003:62 stored in the direct current/direct current (DC/DC)…
• 10244876Oct 27, 2023Hybrid propulsion system, Engine cooling. Some 2020-2023 Escape/2021-2023 Corsair equipped with 2.5L engine full hybrid electric vehicle (FHEV) and plug-in hybrid electric vehicle (PHEV) powertrain and 2022-2023 Maverick vehicles equipped with 2.5L engine FHEV powertrain may exhibit a condition where the 12V battery voltage is low or discharged with diagnostic trouble code (DTC) U3003:62 stored in the direct current/direct current converter control module…
• 10244798Oct 27, 2023Transmission and drivetrain, Engine cooling. Some 2021-2023 Bronco Sport vehicles equipped with a 1.5L engine built on or before 30-Nov-2022, 2021-2023 Bronco Sport vehicles equipped with a 2.0L engine built on or before 28-Feb-2022 or 2020-2022 Escape/Corsair non-plug in hybrid electric vehicle (PHEV) vehicles built on or before 30-Apr-2022 may exhibit a chatter/shudder during low speed turning events. This may be due to contamination of the rear drive unit…
• 10240573Aug 2, 2023Transmission and drivetrain. Some 2020-2023 Escape hybrid vehicles equipped with a 2.5L (FHEV) full hybrid electric vehicle powertrain and 4-wheel drive (4WD) may exhibit a grinding or rubbing noise while braking at or below 10 mph (16 km/h) from the front of the vehicle. This may be due to an inadequate gap between the driveshaft and the heat shield. To correct this condition, follow the Service Procedure to diagnose and position the heat…
• 10240743Jun 8, 2023Equipment. The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
• 10236028May 4, 2023Electrical system. Some 2020-2023 Escape/Corsair equipped with 2.5L engine full hybrid electric vehicle (FHEV) and plug-in hybrid electric vehicle (PHEV) powertrain and 2022-2023 Maverick vehicles equipped with 2.5L engine FHEV powertrain may exhibit a condition where the 12V battery voltage is low or discharged with diagnostic trouble code (DTC) U3003:62 stored in the direct current/direct current converter control module (DC/DC).
• 10211707May 4, 2022Engine cooling. Some 2020-2022 Escape vehicles equipped with a 2.5L full hybrid electric vehicle (FHEV) powertrain built on or before 30-Mar-2022 may exhibit an idle surge and/or rough idle with high temperature in the catalytic converter and/or sulfur odor in the cab. This condition occurs when the high voltage battery is being charged by the engine at cold start and the state of charge (SOC) increases to the top of the charge…
• 10211708May 2, 2022Transmission and drivetrain. Some Escape 2020-2022 plug-in hybrid electric vehicle (PHEV) and 2021-2022 Corsair PHEV may exhibit a 12-volt battery discharged while the vehicle is plugged in during the high voltage battery charging and/or inoperative level 2 charger (220/240 volts) at customers residence but charging performance operates as intended at a dealership or other locations.
• 10210497Apr 25, 2022Electrical system, Transmission and drivetrain, Equipment. Some 2020-2021 Escape and 2021 Corsair vehicles equipped with a 2.5L full hybrid electric vehicle (FHEV) or 2.5L plug-in hybrid electric vehicle (PHEV) powertrain may exhibit a no crank/no start condition due to the passive anti-theft system (PATS) immobilizer being enabled. This may be more prevalent after a vehicle service/repair.
• 10210387Apr 12, 2022Engine cooling, Equipment. Some 2020-2022 Escape plug-in hybrid electric vehicle (PHEV) and 2021-2022 Corsair PHEV vehicles built on or before 3-Mar-2022 may exhibit an illuminated malfunction indicator lamp (MIL) and/or engine coolant over temperature warning message with Diagnostic Trouble Code (DTC) P2183 stored in the powertrain control module (PCM). DTC P26C1 may also be present due to DTC P2183 setting.
• 10200759Aug 17, 2021Electrical system. Some 2020 and 2021 Escape Hybrid vehicles built on or before 19-Jul-2021 may exhibit a rattle/buzz originating in the right rear quarter area. This may be due to the pedestrian alert control module (PACM) internal connector vibrating against the metal housing when subjected to audio frequencies between 50 and 60 Hz. To correct the condition, follow the Service Procedure to insulate the connector.
• 10194409May 4, 2021Equipment. Some 2020 Escape vehicles may exhibit a concern where the LH vents are warmer than the RH vents during A/C operation also may be intermittent. This may be caused by a partial restriction in the rubber portion of the 19A834 A/C line, found in WSM Section 412, Removal and Installation, Condenser Outlet Line. The evap temp sensor PID will generally read too warm due to its location toward the left hand end of the…
• 10191178Apr 19, 2021Electrical system. Some 2020-2021 Escape hybrid electric vehicles (HEV) built on or before 29-Mar-2021 may experience a lack of power, crank/no start, and Stop Safely Now message with diagnostic trouble codes (DTC) P2282, P0106 and/or P1A0C stored in the powertrain control module (PCM) in temperatures below 32’F/0’C. This may be due to various software parameters within the PCM and condensation buildup in the intake…
• 10189787Mar 19, 2021Electrical system. Some 2020 Escape hybrid electric vehicles (HEV) built on or before 4-Dec-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1A0C stored in the powertrain control module (PCM) and exhibit a Stop Safely Now message in the instrument panel cluster (IPC). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the…
• 10189558Mar 9, 2021Engine cooling. Some 2020-2021 Escape hybrid vehicles may experience an illuminated (MIL) and DTC P0106 and/or P2282 while operating at or below freezing and covering daily distances of about 60 miles (100 Km). Remove the throttle body per Workshop Manual (WSM) Section 303-04C and inspect the inside of the intake manifold for water/ice. If present, thaw the vehicle and remove liquid using a suction gun/large syringe and tubing.

← All problems reported for the 2020 Ford Escape Hybrid