2008 Ford F-250 Technical Service Bulletins

12 technical service bulletins (TSBs) are on record for the 2008 Ford F-250. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10179912Jan 12, 2016Steering. In monitoring our technical service inquiries and technical service bulletins from Ford, there is the potential for moderate to severe steering wheel oscillation (wobble) to occur. After extensive testing and outside feedback, the following details have been established to correct or prevent steering wheel oscillation occurrences in lifted 05-16 Ford Super Duty 4wd pickups.
• 10054755Jan 8, 2014Transmission and drivetrain. Ford: the malfunction indicator lamp (mil) on and diagnostic trouble codes (dtcs) p0713 and/or p0710 regarding torqshift transmission. Model 2008-2009 f-53 motorhome chassis, low cab forward, 2008-2010 f-250, f-350, 2008-2011 e-350, e-450, f-450, f-550, 2011 f-53 motorhome chassis, f-50 commercial stripped chassis.
• 10038950Apr 14, 2011Tires. Ford: some continental tires might have uneven wear, vibration, or the possible tread detachment. 2008-2009 f250/f350. *rm updated 8/3/11.
• 10038949Apr 1, 2011Engine cooling. Ford: 2005-2011 f250/f350. The fuel fill nozzle may automatically shut off too early.
• 10039053Mar 1, 2011Transmission and drivetrain, Electrical system, Engine cooling, Brakes. Ford: if there is an intermittent lack of power, surge, or hesitation while driving the brakes will override acceleration.
• 10034712Sep 23, 2010Engine cooling, Transmission and drivetrain, Electrical system. Ford service campaign: see document search button for owner letter. Catalyst y pipe warranty extension.. In some of the affected vehicles, certain vehicle operating conditions can cause the catalyst substrate to crack or melt. This can cause symptoms including but not limited to audible noise from the catalyst y pipe and/or malfunction indicator lamp illumination. Csc letter was received.
• 10034631Jul 1, 2010Engine cooling. Ford: supply/return lines installation at high pressure pump-revised washer for trucks equipped with 6.4l engines. When installing supply or return lines at high pressure pump on diesel engines, do not use the bonded style washer (w302870), use only the hybrid style washer (w303659).
• 10034628Jul 1, 2010Engine cooling, Fuel system. Ford: some trucks with 6.4l engine will run rough, smokes, or no start due to gasoline or alcohol in the fuel. Gasoline/alcohol lack the lubricity of diesel fuel and will cause fuel system failure.
• 10029024Feb 19, 2009Engine cooling, Fuel system. Ford service campaign: see document search button for owner letter. Vehicles fuel injector o rings can prematurely wear. As a result, fuel may leak into crankcase causing oil level to rise. High oil levels can cause drivability concerns and ultimately lead to engine damage. Csc letter was received. *pe updated 12/08/09. Csc letter was rec'd.
• 10024824Mar 1, 2008Fuel system. Slow fuel fill--mil on with dtc p0191.
• 10021591Jun 8, 2007Fuel system. SLOW FUEL FILL.
• 10022240Apr 1, 2007Electrical system. Instrument panel lights dim - spdjb must learn resistance values of dimmer.

← All problems reported for the 2008 Ford F-250