Skip to content
SeatsPart report

1989 Ford Taurus Seats Problems

Complaints
8about this part
Share
1%of 562 total for the year
Median mileage
—not reported
Trend
Not enough dataFewer than 15 complaints, too few for a reliable trend.

NHTSA recorded 8 complaints about the seats of the 1989 Ford Taurus, 1% of the 562 complaints for this model year. 1 of these say a crash was involved and 2 a fire, according to the filers. 1 recall campaign on record is filed under a similar system.

Fewer than 15 complaints name this part, so treat the figures as a rough indication only.

Example complaints

Selected from NHTSA records; personal details are removed. They are consumer reports, not findings.

“When the seat brackets failed I had just sat down in the vehicle I notified the Ford moter company of this problem and all that they said was there was nothing that they could do about the problem. This serves a serious risk formy self and my family and I can not afford to fix tis problem on my own.”

NHTSA complaint #751794, filed 2001-09

“The driver's seat caught on fire when the seat adjustment switch stuck in the 'rear-direction' position. The electric motor apparently overheated and caused the foam to catch fire. The authorized Ford dealer wasn't smart enough to figure out the cause of the fire, but the upholsterer was, because he called me and asked if I wanted the old switch put back on the new seat. I said no. I still have the entire seat assembly, including the switch. Ford never responded to my letter. I don't have the exact date on hand, but this incident occurred about 3.5 years ago. Thank you. Thomas g. Ruf.”

NHTSA complaint #722411, filed 2000-05

“While driving power bucket seat somehow detached from frame/floor? Seat is wobbling around, making it difficult to drive vehicle due to a mounting bracket failure. Please describe details.”

NHTSA complaint #8017774, filed 2002-09

“The drivers seat mounting lug broke, causing the seat to flop backward at every start. The piece is a small stamped metal bracket that holds the seat frame to the floor. The break is about 2 inch long. Half the break is shiny and half is rusty, indicating that the part may have been partially broken when it was installed. The service mgr says he has never seen this part broken, but Ford had a replacement for this obscure part available locally. There are several breaks in the seat mounting assembly. Total costs for parts alone $435 + $145!”

NHTSA complaint #710521, filed 1999-08

Related recalls

Seats: other model years

YearComplaintsShare of year
201611%
201531%
201410%
201320%
201223%
201163%
201073%
200912%
200832%
200711%
200610%
200441%
200330%
200230%
200150%
200081%
199951%
199871%
199730%
199651%
199530%
199440%
1993121%
199220%
199130%
199010%
198981%
1988124%
1987145%
198666%

Other parts of the 1989 Ford Taurus

Seat belts
142 complaints
Electrical system
118 complaints
Engine cooling
97 complaints
Body and structure
66 complaints
Steering
53 complaints
Transmission and drivetrain
52 complaints
Brakes
35 complaints
Fuel system
28 complaints
Vehicle speed control
23 complaints
Suspension
15 complaints
Visibility (wipers, defrost, mirrors)
14 complaints
Tires
11 complaints

← All problems reported for the 1989 Ford Taurus

About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 30, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate.

To check a specific vehicle for open recalls, use its VIN at nhtsa.gov/recalls. Methodology