2017 Ford Transit Connect Brakes Problems

“The brakes on my car would not release. After trying to repair we determined it was due to the abs module. Since the module has to be programed by a dealer to communicate with the ecm, I stopped and turned the car over to a Ford dealer. My car was built just outside a documented recall on the abs module. I told ford thir but they did not cover the repair. It is obvious another bad part got thru and my vehicle should be included. I wrote to the ntsb before, but never heard back. When ford replaced the abs module, I keep the bad part incase someone need to inspect the failed part.”

“On Friday the 22nd of April I was on the interstate and the vehicle began to slow down and make a scrubbing/grinding noise. I took the exit and by the time I reached the crossroad the vehicle would barely move. The brakes were almost completely locked. There was no warning and no diagnostic light was on. Luckily I was able to get off on the shoulder of the road so no one was in danger. The next day the dealer said my brake hoses had deteriorated but after replacing them the problem persisted. They now say the 'hydraulic control module' has failed. …”

“The contact owns a 2017 Ford Transit Connect. The contact stated that while driving at approximately 50 MPH, the front driver’s side brakes malfunctioned, and the front driver’s side wheel failed to properly rotate. The contact later examined the vehicle and discovered that the front driver’s side brake pad had become stuck to the brake rotor. The vehicle was later examined by an independent mechanic who diagnosed that the ABS Control Module and Hydraulic Control Unit had failed and needed to be replaced. The vehicle was not yet repaired. …”

“The contact owns a 2017 Ford Transit. The contact stated while driving 20 MPH in the rain, the vehicle in front of him made a sudden stop. The contact depressed the brake pedal, but the vehicle failed to respond, causing the vehicle to crash into the rear of the other occupied vehicle. There were no injuries sustained. A police report was filed. The vehicle was towed to an independent mechanic, where it was diagnosed that the ABS and the hydraulic control unit (HCU) had failed, which caused the brakes failure. The mechanic replaced the ABS module and the hydraulic control unit (HCU). …”

“HCU (hydraulic control unit) failure, causing brakes to apply without depression of the brake pedal. This occurred both at residential speeds and highway speeds. This caused brakes to over heat excessively and to dangerous levels without system warning. Failure diagnosed by ford dealership technician. Units were recalled on the 2016 Ford Transit Connects for failure unspecified and unknown if there is a relation to this issue as units were only 1 production year apart.”