2016 GMC Acadia Technical Service Bulletins

1,177 technical service bulletins (TSBs) are on record for the 2016 GMC Acadia. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…
• 10116900Feb 17, 2016Engine cooling, Equipment. This technical bulletin provides a procedure to Replace Auxiliary Evaporator, Blower Motor Assembly and Clean Case for concerns regarding A/C Inoperative, Blows Warm or Poor Performance Due to Low Refrigerant Charge, Freon Leak
• 10116891Feb 12, 2016Equipment. This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
• 10116890Feb 12, 2016Exterior lighting. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
• 10116888Feb 11, 2016Equipment. This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
• 10116886Feb 11, 2016Air bags. This informational bulletin provides information on Passenger Presence System (PPS) May Command Seat Belt Reminder Chime and Passenger Airbag Indicator On or Set DTC B101D When Electronic Devices or Conductive Objects are Placed on Front Passenger Seat
• 10096026Feb 11, 2016Equipment. This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10116878Feb 9, 2016Equipment, Electrical system. This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
• 10116874Feb 8, 2016Exterior lighting. This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
• 10116871Feb 5, 2016Equipment. This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
• 10080082Jan 29, 2016Equipment. 15663a - service update (revised special repair tool added). Relocate a wire circuit within the onstar connector. These vehicles lack a ground in the microphone return path, which results in the voice recognition becoming inoperable when the vehicle is in retained accessory (rap) or accessory power mode. In addition, the hands-free voice quality can be degraded. The onstar functions are not impacted by this…
• 10112302Jan 28, 2016Seats, Air bags. This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
• 10112299Jan 27, 2016Equipment. This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
• 10247259Jan 26, 2016Electrical system, Other or unknown. OnStar Microphone Quality Revised Service Procedure
• 10248437Jan 25, 2016Seats. Third Row Seat Crossbar Weld
• 10112288Jan 25, 2016Transmission and drivetrain. This informational buleltin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares and information on transmission fast learns
• 10252175Jan 22, 2016Equipment. XM Digital Radio Receiver.
• 10112280Jan 21, 2016Transmission and drivetrain. This technical bulletin provides a procedure to replace the 3-5-reverse clutch plates for conditions of no reverse, no third, and DTC P0716, P0717
• 10112278Jan 19, 2016Steering. This technical bulletin provides a procedure to flush and bleed the power steering system to correct a condition of power steering noise or fluid leak from power steering pump, gear or high pressure hose during extreme low temperature conditions.
• 10112277Jan 19, 2016Equipment, Electrical system. This technical bulletin provides a procedure to update your apple product to the latest software version to correct a condition of infotainment system will not return to media after bluetooth call ends
• 10075743Jan 19, 2016Engine. Summary to be provided on a future date.
• 10112272Jan 14, 2016Engine. This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
• 10246963Jan 13, 2016Equipment. Changing Turn-By-Turn Voice Response To Metric Or English Units
• 10112264Jan 7, 2016Body and structure. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
• 10112261Jan 4, 2016Equipment. This informational bulletin provides information regarding Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules
• 10250074Jan 1, 2016Transmission and drivetrain. Information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares
• 10250068Jan 1, 2016Transmission and drivetrain. No Reverse, No Third, DTC P0716, P0717
• 10250067Jan 1, 2016Equipment. Infotainment System Will Not Return to Media After Bluetooth Call Ends
• 10248436Jan 1, 2016Seats. Third Row Seat Crossbar Weld
• 10246639Jan 1, 2016Steering. Power Steering Noise or Fluid Leak from Power Steering Pump, Gear or High Pressure Hose During Extreme Low Temperature Conditions
• 10246561Jan 1, 2016Transmission and drivetrain. Information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares
• 10246555Jan 1, 2016Transmission and drivetrain. No Reverse, No Third, DTC P0716, P0717
• 10115003Dec 30, 2015Engine cooling. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have oil mixed in with the engine coolant. Technician will need to inspect the oil cooler if equipped for possible leaking into the cooling system through the radiator. If no issue found replace the engine as well as all rubber coolant hoses.
• 10114977Dec 18, 2015Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10114955Dec 9, 2015Equipment, Visibility (wipers, defrost, mirrors). This Preliminary Information communication provides information to the technician about vehicles that may have a creak, pop, tick, or itch type noise from the windshield area while driving. Technician should take the vehicle on a test drive to verify the concern. When the concern is present have a second technician use a trim tool and push on the windshield alignment pin. If the noise changes or is gone remove the…
• 10114954Dec 9, 2015Fuel system, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10201125Dec 1, 2015Forward collision avoidance, Back-over prevention (rear camera), Visibility…. Information on Inside Rear view Mirror and Camera Loose
• 10201106Dec 1, 2015Equipment. Voice recognition/Voice Command Poor or Erratic Performance
• 10201099Dec 1, 2015Equipment, Electrical system. IPC Odometer Programming Method Quick Reference Guide
• 10201098Dec 1, 2015Transmission and drivetrain, Engine. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10190535Dec 1, 2015Electrical system, Visibility (wipers, defrost, mirrors). Information on Inside Rear View Mirror and Camera Loose Some customers may comment that the inside rear view mirror or front camera is loose or that the mirror/camera mounting bracket is loose or has fallen off. If a vehicle is encountered with the above condition, do not attempt to reinstall the bracket onto the windshield. The above listed vehicles have a revised bracket design that is not serviceable. It is…
• 10190504Dec 1, 2015Equipment, Electrical system. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC.
• 10190503Dec 1, 2015Engine, Transmission and drivetrain. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10114939Dec 1, 2015Engine. This Preliminary Information communication provides information to the technician about vehicles that have a knock noise, seized engine, lower end squeak or squeal from the engine. Technician will inspect the oil control solenoids for metal debris. Also inspect for damage to the cam caps Journals and camshaft journals on the heads. The check the timing chain idler sprockets for stiffness when turning. If any of…
• 10137258Nov 30, 2015Equipment. This informational bulletin provides information for technicians on the reuse of fasteners and the proper reading of torque specifications.
• 10115143Nov 30, 2015Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10137255Nov 25, 2015Tires, Wheels. This informational bulletin provides additional information to the technician on how to check for Tire Radial Force Variations and the difference between balancing a flange and flangeless rim.
• 10115138Nov 25, 2015Equipment, Suspension. This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer…
• 10115129Nov 23, 2015Engine. This Preliminary Information communication provides information to the technician about vehicles that have a knock noise, seized engine, lower end squeak or squeal from the engine. Technician will inspect the oil control solenoids for metal debris. Also inspect for damage to the cam caps Journals and camshaft journals on the heads. The check the timing chain idler sprockets for stiffness when turning. If any of…

← All problems reported for the 2016 GMC Acadia