2015 GMC Sierra Denali Technical Service Bulletins

1,815 technical service bulletins (TSBs) are on record for the 2015 GMC Sierra Denali. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10245741Nov 1, 2014Equipment. dealer Empowerment Labor Operations and Customer Enthusiam
• 10245289Nov 1, 2014Electronic stability control. Unwanted Stability Activation and/or C0710.
• 10135356Oct 30, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
• 10114328Oct 30, 2014Equipment. This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and now is refered to Article 3.2.9 of the 1st addition manual for details of Technician Identification and Accounting of Labor Time
• 10135355Oct 28, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the navigation voice feedback is choppy, distorted, or garbled. Technician will need to press Settings, Voice, Audio Feedback Speed, and verify speed is set to Medium.
• 10114320Oct 28, 2014Electrical system. This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
• 10135352Oct 27, 2014Equipment. This Preliminary Information communication advises the technician that the Human Machine Interface, Radio or Tuner, radio controls, Integrated Center Stack, display, and Media Disc Players are placed on restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10114317Oct 27, 2014Equipment. This preliminary bulletin provides information of whats needed to equip a vehicle with a snow plow package and what vehicles should used for plowing.
• 10114315Oct 27, 2014Equipment. This information bulletin explains how to measure for oil consumpsion and possible reasons for loss of oil.
• 10114314Oct 27, 2014Equipment. This information bulletin explains how to care and repair the spray-in bed liners.
• 10114312Oct 24, 2014Equipment. This informational bulletin explains not to put multiple keys on one key ring and how to tag a key.
• 10114309Oct 23, 2014Visibility (wipers, defrost, mirrors). This informational bulletin explains how to care for wiper blades.
• 10114305Oct 23, 2014Body and structure. This preliminary bulletin provides a procedure to install foam at the front doors to redirect the water away from the door hinges during cold conditions and to correct the customers concern of the front doors are hard to open when cold.
• 10135350Oct 22, 2014Electrical system. This Preliminary Information communication provides information to the technician about owners that want the auto door lock disabled. There is no avalible setting or Body Control Module calibration to turn off the auto door locks.
• 10135349Oct 22, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration.
• 10135342Oct 20, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135340Oct 17, 2014Electrical system, Wheels. This Preliminary Information communication provides information to the technician about vehicles that may have a repeat service 4 wheel drive message. Technician may find Diagnostic Trouble Codes C0398, C038D or C0397. Technician will need to reprogram the Transfer case control module with latest software available through tis2web.
• 10135337Oct 17, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The…
• 10114299Oct 17, 2014Equipment. This informational bulletin provides a quick guide to updating which model vehicle after replacing the IPC.
• 10114296Oct 16, 2014Equipment. This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on…
• 10135334Oct 15, 2014Engine cooling, Transmission and drivetrain. This Preliminary Information communication provides information to the technician about vehicles that may have a shudder or vibration while the transmission is engaging into drive. Technician will need to replace the 1,2,3,4 clutch piston clutch and parts.
• 10135329Oct 14, 2014Equipment. This Preliminary Information communication provides information to the technician that when the vehicle is shut off while the radio is off and the analog clock is displayed, the radio will turn back on with muted audio if the customer restarts the vehicle. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
• 10135328Oct 14, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have that the USB port is inoperative or they receive a message of ?No other media available? when pressing the Media button. Dealer should advise the customer engineering is aware of the concern and is currently working towards a resolution.
• 10135327Oct 14, 2014Equipment. This Preliminary Information communication advises the technician about vehicles that the HD turns on unwanted when tuning to radio stations using voice commands. General Motors Engineering is aware of concern and currently evaluating.
• 10135322Oct 10, 2014Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10135321Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
• 10135320Oct 10, 2014Equipment. This Preliminary Information communication provides information to the technician on the step to diagnose and repair vehicles that have A Diagnostic Trouble Code P06DD. If the technician finds Diagnostic Trouble Codes P06DA, P06DB, P06DC and Diagnostic Trouble Code P06DD not set install the scan tool and gather information. After the information is gathered call General Motors Technical Assistance Center for…
• 10114289Oct 10, 2014Tires. This informational bulletin provides additional information on how to use the proper adapters to balance HD tires.
• 10135318Oct 9, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. When it is time for the oil change, fill with the recommended amount of engine oil as specified in Service Information.
• 10114285Oct 7, 2014Equipment. This informational bulletin provides a list of parts/replacement parts for the tonneau covers.
• 10135313Oct 6, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a vibration that is felt between 1200 ? 1400 engine revolutions per minute when in active fuel management V4 mode. Technician will need to use J?38792-A Electronic Vibration Analyzer 2 or CH?51450-NVH Pico Oscilloscope Diagnostic Kit to measure the frequency of the vibration.
• 10135312Oct 6, 2014Equipment. This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blow warm. Technician will need to replace the compressor to condenser line and install the line bracket.
• 10114280Oct 6, 2014Equipment. This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
• 10135309Oct 2, 2014Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that engine oil dipstick indicates engine is over filled when performing a Pre-Delivery Inspection or after an oil and filter change. Technician will drain half a quart of oil.
• 10135308Oct 2, 2014Electrical system. This Preliminary Information communication provides information to the technician about vehicles that when starting the vehicle intermittently they have no audio except chime. Technician will need to disconnect the amplifier, turn on ignition, and verify approximately 12 volts on circuit 3999 connector X4 terminal 14. If no voltage is present, check circuit 3999 for an open and repair as needed.
• 10135304Oct 2, 2014Electrical system, Engine cooling. This Preliminary Information communication advises the technician that If it is determined the crankshaft needs to be replaced complete the Service Information diagnostics to determine if the crankshaft requires replacement. If determined the engine has bearing and crankshaft damage, the engine should be replaced along with the oil cooler. Also ensure latest version of 09-06-04-026G to verify the Engine Control…
• 10150643Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10142238Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10137817Sep 30, 2014Suspension. This technical bulletin provides a procedure to add a lubricant to the rear leaf springs to correct the customers concern of a squeaking noise from the rear suspension.
• 10142233Sep 29, 2014Electrical system. This prelimenary bulletin provides a procedure to replace the accessory a/c and d/c power control module to correct the customers concern of the the power outlet intermittently works.
• 10137812Sep 29, 2014Electrical system. This prelimenary bulletin provides a procedure to replace the accessory a/c and d/c power control module to correct the customers concern of the the power outlet intermittently works.
• 10112258Sep 29, 2014Fuel system, Equipment. This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10150640Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10142231Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10137810Sep 25, 2014Body and structure. This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
• 10112251Sep 24, 2014Engine cooling. This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10150637Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10142226Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10137805Sep 23, 2014Equipment. This informational bulletin provides information on how to use floor mats.
• 10150635Sep 19, 2014Electrical system. This technical bulletin provides a procedure on how to turn the transport mode message of and reset the battery light flashing.

← All problems reported for the 2015 GMC Sierra Denali