2017 GMC Sierra Technical Service Bulletins

883 technical service bulletins (TSBs) are on record for the 2017 GMC Sierra. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10134592Oct 23, 2017Electrical system. The information in this bulletin details the proper configurations for the ignition key, fob, key tags, key rings, key ring sizes and applying a QR code sticker or barcode sticker to a key fob.
• 10123270Oct 20, 2017Equipment. This Preliminary Information communication advises the technician that the Product Quality Center has a part restriction for the 8L45 and 8L90 park actuator rod. The dealer technician is advised to call the GM Product Quality Center for further assistance.
• 10134616Oct 19, 2017Fuel system. This technical bulletin provides a procedure to replace the fuel pump to correct the MIL concerns.
• 10123268Oct 19, 2017Fuel system, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have hesitation or a stalling condition while in ambient temperatures 100 degrees or higher. Technician may find Diagnostic Trouble Codes P2635 and or P018B set. The dealer is advised to replace the in tank fuel pump module assembly to correct the condition.
• 10123267Oct 19, 2017Fuel system. This Preliminary Information communication advises the technician that the 6.6L Diesel engine Regular Production Option Code (L5P) EGR Valve Part number 12677567 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10134612Oct 17, 2017Back-over prevention (rear camera). This informational bulletin provides information to the customer about the rear camera guidelines not being present at times due to the VBM taking over the rear camera option.
• 10123259Oct 16, 2017Electrical system, Back-over prevention (rear camera). This Preliminary Information communication provides information to the technician about vehicles that are found to have a back-up alarm inoperative during the Pre-Delivery Inspection. On trucks equipped with the Back Up Alarm (RPO 8S3), the alarm will be intentionally left disconnected from the assembly plant. Technician will reroute the harness and plug it in.
• 10123254Oct 16, 2017Body and structure, Equipment. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have rattle or ticking noise that is louder inside the vehicle than outside. The noise may also sound like a lifter tick. If the noise is heard best at the fuel line and the sound will be real loud with a stethoscope. The fuel line will need to be replaced.
• 10123253Oct 16, 2017Body and structure, Equipment. This Preliminary Information communication provides the technician with weight capacity for the tailgate and cargo loops in the bed.
• 10134607Oct 13, 2017Transmission and drivetrain. This engineering informational bulletin ends the need for information from the field on vehicles that have the condition of Harsh, Delayed, and/or Improper Shifts.
• 10123252Oct 13, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency…
• 10123251Oct 13, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician on installing Regular Production Option Code 9L7 Up-fitter Auxiliary Switches. Technician will need to reference the latest version of General Motors Up-fitter Integration Bulletin 110. The information can be found at http://www.gmupfitter.com/ under the "Technical Bulletin" Tab and then "Show all bulletins."
• 10123250Oct 13, 2017Equipment. This Preliminary information communicatesContent Theft Deterrent RPO UTJ is included and only available with Remote Vehicle Start RPO BTV. If the vehicle is not equipped with Remote Vehicle Start RPO BTV the vehicle will not have Content Theft Deterrent.
• 10134610Oct 12, 2017Equipment. This informational bulletin advised the technician of a possible OnStar module configuration concern that can be changed by pressing the blue button to On Star.
• 10123239Oct 12, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that may have hesitation or a stalling condition while in ambient temperatures 100 degrees or higher. Technician may find Diagnostic Trouble Codes P2635 and or P018B set. The dealer is advised to replace the in tank fuel pump module assembly to correct the condition. Dealer directed to follow latest version of PIP5507…
• 10134593Oct 11, 2017Equipment. This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
• 10123231Oct 9, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a check engine light on. Technician may find Diagnostic Trouble Codes P0101, P0299, P0712, P11CC, P11DC, P2002, P2463, P2627, P2A00, P2459, P22B6, P200C, P200E, P0263, P0266, P0269, P0272, P0275, P0278, P0281 and/or P0284. Technician will need to follow publish Service Information diagnostics first.
• 10134602Oct 6, 2017Electrical system. This engineering information bulletin is requesting information from the field on vehicles that have the condition of Malfunction Indicator Lamp Illuminated with DTC P22FE Set.
• 10123228Oct 6, 2017Electrical system, Fuel system. This Preliminary Information communication advises the technician that the 6.6L Diesel engine Regular Production Option Code (L5P) E41Engine Control Module part number 12683624 will be placed on a parts restriction through the General Motors Technical Assistance Center. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
• 10134601Oct 5, 2017Exterior lighting. This engineering informational bulletin is requesting information from the field on vehicles that have the condition of Both Front Low Beam, High Beam, Day Time Running Lamps (DRL) and Turn Signals Inoperative.
• 10123227Oct 5, 2017Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
• 10134604Oct 4, 2017Transmission and drivetrain. This engineering informational bulletin is requesting information from the field on vehicles that have the condition of a Torque Converter Shudder.
• 10134595Oct 3, 2017Electrical system, Equipment. This informational bulletin provides information on approved warranty part numbers for original equipment batteries
• 10123222Oct 3, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10123221Oct 3, 2017Equipment. This Preliminary information communicates to the dealer technicians aprocedure to determine if the vehicle'sSCR system is healthy.
• 10123220Oct 3, 2017Equipment. This Preliminary Information communication provides information to the technician about vehicles that have a check engine light on. Technician may find Diagnostic Trouble Codes P0101, P0299, P0712, P11CC, P11DC, P20EE, P2002, P2463, P2627, P2A00, P2459, P22B6, P200C, P200E, P0263, P0266, P0269, P0272, P0275, P0278, P0281 and/or P0284. Technician will need to follow publish Service Information diagnostics first.
• 10123219Oct 2, 2017Electrical system. This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages “ Brake Pedal Override Feature “, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set.
• 10123216Oct 2, 2017Electrical system. This Preliminary Information communication provides information to the technician the steps to diagnose and repair the concern of the display is showing 32° F (0° C) after a battery or reprogramming a module. The outside temperature will begin to update if driven above 20 mph for at least 5 minutes. If the vehicle speed drops below 20 mph, the timer will reset and the display will stop updating.
• 10123215Oct 2, 2017Electrical system, Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have a radio backlighting will stay on even after the ignition has been turned off and the key has been removed for several minutes, eventually the battery will drain. Technician may find following fuses F23DL F22DL F30DL F31DL F32DL with the ignition key in the off position to have voltage. Technician should…
• 10123213Oct 2, 2017Suspension. This Preliminary Information communication provides information to the technician about vehicles that have a creak, click, pop, and or crack type noise from the front suspension or front frame area while making tight turns. Technician will need to loosen and then re-torque the four front frame cross member nuts and bolts.
• 10123212Oct 2, 2017Fuel system. This Preliminary Information communication advises the technician that the 6.6L Diesel Engine exchange program will be in effect for 2017 and 2018 model yearsthrough the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
• 10123210Oct 2, 2017Engine cooling. This Preliminary information communicates that the 2017 Chevrolet Silverado and GMC Sierra with the 6.6 L5P engines Turbocharger and Actuator parts restriction has ended.
• 10123209Oct 2, 2017Equipment. This Preliminary information communicates a customer concern ofIPC gauges inoperative or fluctuate, No Start,No Crank,SIR Light / Service Airbag Message, Service Suspension Message,Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback,HVAC controls inoperative.
• 10159594Sep 29, 2017Engine. This technical bulletin provides a procedure to reprogram the ECM and TCM to the latest calibrations to correct the concerns.
• 10157036Sep 26, 2017Engine, Electrical system. This Preliminary information communicates to dealer technicians to update the GPCM calibration if glowplug DTCs are found.
• 10157034Sep 25, 2017Body and structure, Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an EZ Lift and Lower tailgate opens too quickly. Technician will ensure nothing was added to the tailgate. If the tailgate opens within approximately 2-6 seconds, no repairs should be made. Technician should inspect the right tailgate bushing if the tailgate opens too quickly.
• 10157033Sep 25, 2017Engine cooling, Equipment, Electrical system. This Preliminary Information communication provides information to the technician of additional information when diagnosing a service driver assist message with a diagnostic trouble code B172E and or a B172F. The haptic seat motor has a pigtail lead coming off of it. In many cases the wiring pigtail near the haptic seat motor has broken and will require replacement.
• 10157031Sep 25, 2017Equipment, Engine. This Preliminary information communicatesA vehicle may have a concern of engine noise and/or a misfire. This may be caused by a broken rocker arm. A broken rocker arms that could result in the valve dropping to the cylinder, causing a catastrophic failure and the engine requires replacement due to cylinder head and block damage. If a broken rocker arm is found check to see if the valve dropped into the cylinder if…
• 10157029Sep 25, 2017Electrical system, Engine. This preliminary information communicates a Diagnostic Tip for a Service Trailer Brake Message with DTC C111B C1112 C1113 C1114 advising to address any battery issues first before any in depth diagnostics are done.
• 10159570Sep 20, 2017Electrical system. This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
• 10157023Sep 20, 2017Engine, Electrical system. This Preliminary Information communication advises the technician that there have been some reports that the current engine hours are not correct and display 0.0. Technician will need to program the Instrument Panel Cluster using Service Programming System.
• 10157021Sep 20, 2017Body and structure, Wheels. This Preliminary Information communication provides information to the technician about vehicles that have raised dents or ripple appearance in the side outer panel of the cargo box around the perimeter of the wheel house opening. Technician should first access the rear of the inner wheelhouse area through the tail lamp cavity and the front of the wheelhouse from under the vehicle, and coat the inner hem of the…
• 10157020Sep 20, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2.
• 10157018Sep 20, 2017Fuel system, Tires, Equipment, Electrical system. This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
• 10157014Sep 18, 2017Fuel system, Engine. This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel…
• 10157013Sep 18, 2017Engine, Electrical system. This Preliminary Information communication provides information to the technician about vehicles that have a check engine light on. Technician may find Diagnostic Trouble Code P026A. The owner's manual advises not to drive above 45 MPH with a snowplow installed. However, GM Engineering is aware of the concern and is investigating.
• 10157012Sep 18, 2017Suspension, Equipment. This Preliminary Information communication provides information to the technician with the steps to diagnosis and repair vehicles with various handling, vehicle dynamics concerns, noises from the suspension or underbody, or issues related to damaged suspension components. Before any in-depth diagnostics are performed, be aware that various issues could occur if the vehicle has been modified and inform the customer…
• 10157010Sep 15, 2017Equipment, Electrical system. This Preliminary Information communication provides information to the technician about customers that may request the factory Integrated Trailer Brake Controller Regular Production Option Code (JL1) be installed on their Full-Size Pickup or SUV when the vehicle was not ordered with the option. Dealer should advise the customer it cannot be added to the vehicle.
• 10157009Sep 15, 2017Electronic stability control. This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in-depth diagnostics are performed.
• 10159575Sep 14, 2017Electrical system. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.

← All problems reported for the 2017 GMC Sierra