2013 GMC Yukon Denali Technical Service Bulletins

1,542 technical service bulletins (TSBs) are on record for the 2013 GMC Yukon Denali. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10112771Mar 2, 2016Equipment. This informational bulletin provides information on New Vehicle Pre-Delivery Inspection (PDI) - Delivering Quality Vehicles and Generating Higher CSi Scores
• 10112770Mar 2, 2016Electrical system. This informational bulletin provides information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability
• 10112769Mar 2, 2016Equipment. This informational bulletin provides information on Battery Testing and Warranty Replacement Requirements (North America ONLY)
• 10112768Mar 2, 2016Equipment. This informational bulletin provides information on how to properly maintain vehicles in the dealer inventory
• 10113889Mar 1, 2016Equipment. This Preliminary Information communication provides the technician with a list of modules to check for communication with the scan tool, if the navigation radio does not display the current Hybrid mode. Dealer will use a scan tool to check communication with Accessory Direct current Power Control Module, Air Condition control module, Drive Motor Generator Power Inverter Module, Engine Control Module, Battery Energy…
• 10113888Mar 1, 2016Engine. This Preliminary Information communication provides steps the technician will uses to diagnose and repair vehicles that have low oil pressure after an oil change with the engine Regular Production Option Code L20, L77, L94, L96, L99, L9H, LC8, LC9, LH9, LMF, LMG, LY6, or LZ1. Vehicle may have Service Engine Soon lamp with Diagnostic Trouble Code P0521 or Low Oil Pressure message on the instrument panel. Dealer will…
• 10113887Mar 1, 2016Brakes, Electrical system. This Preliminary Information communication provides the technician with the additional steps that are needed to help perform a successful brake bleed on the 2-Mode Hybrid with Regular Production Option Code HP2. With a battery maintainer installed on the vehicle use brake pressure bleeder that maintains 30 psi for the entire bleed procedure.
• 10112764Mar 1, 2016Equipment. This warranty informational bulletin provides a list of all the required operating procedures and explains them out to what is acceptable and not.
• 10114443Feb 27, 2016Fuel system. This Preliminary Information communication provides information to the technician about vehicles that have an inaccurate fuel gauge. Technician should drive the vehicle to duplicate the concern. The fuel gauge will have a tendency to falsely indicate a lower fuel level than what is actually present. The fuel gauge will take a few minutes to show the correct fuel level. On vehicles equipped with an automatic…
• 10116914Feb 23, 2016Tires, Wheels. This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
• 10114431Feb 23, 2016Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…
• 10116891Feb 12, 2016Equipment. This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
• 10116890Feb 12, 2016Exterior lighting. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
• 10116888Feb 11, 2016Equipment. This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
• 10096026Feb 11, 2016Equipment. This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10116878Feb 9, 2016Electrical system, Equipment. This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
• 10095901Feb 9, 2016Engine. This preliminary information communication provides information to the technician about vehicles that may have a cold engine tick noise for 50 seconds at start up. Technician determines if the tick noise is possibly coming from the exhaust manifold, as this noise could easily be mistaken for an engine tick noise.
• 10116874Feb 8, 2016Exterior lighting. This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
• 10116871Feb 5, 2016Equipment. This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
• 10116863Feb 1, 2016Equipment. This informational bulletin provides information on Behavior of Non-Upgraded OnStar Equipped Vehicles Operating in Canada after Decommissioning of 2G CDMA Cellular Networks
• 10095613Feb 1, 2016Equipment, Electrical system, Transmission and drivetrain. This preliminary information communication provides information to the technician on the steps for diagnosing and repairing vehicles with diagnostic trouble code p0c2b with or without p2797. Technician should not replace the auxiliary transmission fluid pump. Technician will follow published diagnosis inspect the wiring between the hpcm and the auxiliary transmission fluid pump control module.
• 10112302Jan 28, 2016Seats, Air bags. This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
• 10112299Jan 27, 2016Equipment. This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
• 10112287Jan 25, 2016Steering. This preliminary informational bulletin provides a procedure to apply dielectric grease and a piece of adhesive shim stock to the steering angle sensor connector to correct a condition of service stabilitak message displayed in DIC and DTC C0455 or C0710
• 10112278Jan 19, 2016Steering. This technical bulletin provides a procedure to flush and bleed the power steering system to correct a condition of power steering noise or fluid leak from power steering pump, gear or high pressure hose during extreme low temperature conditions.
• 10112277Jan 19, 2016Equipment, Electrical system. This technical bulletin provides a procedure to update your apple product to the latest software version to correct a condition of infotainment system will not return to media after bluetooth call ends
• 10112272Jan 14, 2016Engine. This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
• 10246963Jan 13, 2016Equipment. Changing Turn-By-Turn Voice Response To Metric Or English Units
• 10112264Jan 7, 2016Body and structure. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
• 10250067Jan 1, 2016Equipment. Infotainment System Will Not Return to Media After Bluetooth Call Ends
• 10114977Dec 18, 2015Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10114954Dec 9, 2015Fuel system, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10201115Dec 1, 2015Equipment, Other or unknown. OnStar Voice Fallback Number Update
• 10201098Dec 1, 2015Transmission and drivetrain, Engine. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10190503Dec 1, 2015Engine, Transmission and drivetrain. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
• 10190383Dec 1, 2015Fuel system, Other or unknown. Fuel Odor During Fuel Filling or During Idle, Possible P0442 or P0455 DTCs Set Some customers may comment on a strong fuel odor during fuel filling or during vehicle idle. Cause This may be caused by the fracture or breaking of the gasoline filler neck recirculation line connector Correction If you encounter a vehicle with the above concern, complete the following procedure: 1. Raise the vehicle and visually…
• 10137258Nov 30, 2015Equipment. This informational bulletin provides information for technicians on the reuse of fasteners and the proper reading of torque specifications.
• 10115143Nov 30, 2015Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10137255Nov 25, 2015Tires, Wheels. This informational bulletin provides additional information to the technician on how to check for Tire Radial Force Variations and the difference between balancing a flange and flangeless rim.
• 10115138Nov 25, 2015Equipment, Suspension. This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer…
• 10137250Nov 23, 2015Equipment. This preliminary informational bulletin provides repair information to correct a customer concern of poor radio hands-free voice recognition performance or sound quality after OnStar upgrade.
• 10115128Nov 23, 2015Equipment. This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
• 10137249Nov 20, 2015Equipment. This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
• 10137246Nov 20, 2015Equipment. This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
• 10137237Nov 12, 2015Electrical system. This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
• 10126401Oct 30, 2015Body and structure. This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
• 10126395Oct 27, 2015Engine cooling. This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
• 10126393Oct 26, 2015Equipment. This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).

← All problems reported for the 2013 GMC Yukon Denali