2014 GMC Yukon XL Technical Service Bulletins

1,524 technical service bulletins (TSBs) are on record for the 2014 GMC Yukon XL. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10112795Mar 15, 2016Equipment. This informational bulletin provides information on what is needed to be prepared for TAC, caller preparedness and checklists and contacting U.S. technical Assistance and the use of strategy based diagnostics
• 10112791Mar 14, 2016Equipment. This warranty administration bulletin provides information on Courtesy Transportation and Roadside Assistance Programs
• 10112789Mar 14, 2016Visibility (wipers, defrost, mirrors). This technical bulletin provides a procedure to relearn the power folding mirriors and road test to correct a conditon of power fold away mirriors glass shakes or flutters at normal driving speeds
• 10112785Mar 10, 2016Equipment, Electrical system. This informational bulletin provides information on Original Equipment Batteries Part Number and ACDelco Replacement Battery Approved Warranty Part Numbers
• 10112783Mar 9, 2016Equipment. This engineering informational bulletin is requesting information from th field on vehicles that have the condition of a vehicle crank and no start with DTC P0011 and or P00C6 set
• 10113921Mar 8, 2016Equipment. This Preliminary Information communication advises the technician after the OnStar Canada upgrade the OnStar Vehicle Diagnostic Email report is inoperative. Please communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
• 10112779Mar 7, 2016Electrical system. This informational bulletin provides information on vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak and that this is considered a normal conditon and no repairs are necessary
• 10113914Mar 4, 2016Engine cooling. This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the coil grounds ring terminal at the engine block for the bank with the concern and repair the wire.
• 10113913Mar 4, 2016Equipment, Engine. This Preliminary Information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a Diagnostic Trouble Code P0011 or P00C6 current or history. The Camshaft Position Actuator Solenoid Valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the Camshaft Position Actuator…
• 10112773Mar 3, 2016Electrical system. This informational bulletin provides information on If the radar does not see any vehicles, structures, or objects for 15-25 minutes of driving, the system may think its blocked and display the ?Side Object Detection System Disabled? message.
• 10112771Mar 2, 2016Equipment. This informational bulletin provides information on New Vehicle Pre-Delivery Inspection (PDI) - Delivering Quality Vehicles and Generating Higher CSi Scores
• 10112770Mar 2, 2016Electrical system. This informational bulletin provides information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability
• 10112769Mar 2, 2016Equipment. This informational bulletin provides information on Battery Testing and Warranty Replacement Requirements (North America ONLY)
• 10112768Mar 2, 2016Equipment. This informational bulletin provides information on how to properly maintain vehicles in the dealer inventory
• 10112764Mar 1, 2016Equipment. This warranty informational bulletin provides a list of all the required operating procedures and explains them out to what is acceptable and not.
• 10114443Feb 27, 2016Fuel system. This Preliminary Information communication provides information to the technician about vehicles that have an inaccurate fuel gauge. Technician should drive the vehicle to duplicate the concern. The fuel gauge will have a tendency to falsely indicate a lower fuel level than what is actually present. The fuel gauge will take a few minutes to show the correct fuel level. On vehicles equipped with an automatic…
• 10116914Feb 23, 2016Tires, Wheels. This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
• 10114431Feb 23, 2016Equipment. This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
• 10116912Feb 22, 2016Equipment. This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
• 10096141Feb 18, 2016Equipment. This preliminary information communication provides information to the technician about vehicles that may have an outside air temperature inoperative. To perform an instant update of the ambient temperature sensor, press and hold the recirc button and air conditioning button on the heater-vent-air conditioning control head simultaneously. It is also possible to perform this by using a scan tool in special function…
• 10095945Feb 15, 2016Fuel system, Engine. This preliminary information communication provides information to the technician how to diagnose and repair a vehicle with an engine that runs with an intermittent crank no start with a diagnostic trouble code p0011 or p00c6 current or history. The camshaft position actuator solenoid valve may be sticking or binding causing the valve timing to be retarded. Dealer will need to cycle the camshaft position actuator…
• 10116891Feb 12, 2016Equipment. This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
• 10116890Feb 12, 2016Exterior lighting. This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
• 10096033Feb 12, 2016Engine. This preliminary information communication advises the technician before replacing the crankshaft to review the following. Dealer should complete the service information diagnostics and the cost comparison worksheet for assembly repair vs replacement. Technician will use the latest version of 09-06-04-026g to verify the ecm calibration is not an aftermarket calibration. If the customer prefers to keep the original…
• 10116888Feb 11, 2016Equipment. This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
• 10096026Feb 11, 2016Equipment. This preliminary information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
• 10116878Feb 9, 2016Electrical system, Equipment. This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
• 10095901Feb 9, 2016Engine. This preliminary information communication provides information to the technician about vehicles that may have a cold engine tick noise for 50 seconds at start up. Technician determines if the tick noise is possibly coming from the exhaust manifold, as this noise could easily be mistaken for an engine tick noise.
• 10116874Feb 8, 2016Exterior lighting. This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
• 10096054Feb 8, 2016Equipment, Transmission and drivetrain. This preliminary information communication provides information to the technician that some vehicles may have a high pitched whine noise from the vehicle noticed when driving in auto 4wd. When the transfer case control module has to move the transfer case actuator motor the higher current passing through the module causes an "electronic buzz or whine" within some of the capacitors in the module that can be heard by…
• 10116872Feb 5, 2016Equipment. This technical bulletin provides a procedure on how to remove door trim panles and replace chime speaker pigtail connectors for vehicles with the condition of intermittent loss of chime from speaker
• 10116871Feb 5, 2016Equipment. This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
• 10116863Feb 1, 2016Equipment. This informational bulletin provides information on Behavior of Non-Upgraded OnStar Equipped Vehicles Operating in Canada after Decommissioning of 2G CDMA Cellular Networks
• 10095352Jan 30, 2016Steering. This preliminary information communication provides information to the technician on how to diagnose and repair vehicles that may have a grind, pop, shudder or bind feeling/noise in the steering column when turning left or right. Technician will inspect for the lower column bearing to be out of position and the upper intermediate steering shaft to lower column shaft bolt and nut may be contacting the…
• 10112302Jan 28, 2016Seats, Air bags. This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
• 10112299Jan 27, 2016Equipment. This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
• 10112287Jan 25, 2016Steering. This preliminary informational bulletin provides a procedure to apply dielectric grease and a piece of adhesive shim stock to the steering angle sensor connector to correct a condition of service stabilitak message displayed in DIC and DTC C0455 or C0710
• 10112278Jan 19, 2016Steering. This technical bulletin provides a procedure to flush and bleed the power steering system to correct a condition of power steering noise or fluid leak from power steering pump, gear or high pressure hose during extreme low temperature conditions.
• 10112277Jan 19, 2016Equipment, Electrical system. This technical bulletin provides a procedure to update your apple product to the latest software version to correct a condition of infotainment system will not return to media after bluetooth call ends
• 10075754Jan 19, 2016Electrical system. Summary to be provided on a future date.
• 10112272Jan 14, 2016Engine. This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
• 10246963Jan 13, 2016Equipment. Changing Turn-By-Turn Voice Response To Metric Or English Units
• 10112264Jan 7, 2016Body and structure. This informational bulletin provides information on removing paint stains on the under side of protective shipping film
• 10250067Jan 1, 2016Equipment. Infotainment System Will Not Return to Media After Bluetooth Call Ends
• 10114977Dec 18, 2015Equipment. This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
• 10114954Dec 9, 2015Fuel system, Engine cooling. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442…
• 10250048Dec 1, 2015Back-over prevention (rear camera). Clunking Noise from Front of Vehicle During Turns and/or Bumps
• 10250047Dec 1, 2015Back-over prevention (rear camera). Clunking Noise from Front of Vehicle During Turns and/or Bumps
• 10246535Dec 1, 2015Suspension. Clunking Noise from Front of Vehicle During Turns and/or Bumps
• 10246534Dec 1, 2015Suspension. Clunking Noise from Front of Vehicle During Turns and/or Bumps

← All problems reported for the 2014 GMC Yukon XL