2013 Honda Fit Technical Service Bulletins

57 technical service bulletins (TSBs) are on record for the 2013 Honda Fit. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10129825Feb 26, 2014Electrical system. Service bulletin - The Fit EV is designed to charge at a high rate resulting in a shorter charge time. If the connection between the charger and the charge inlet terminal is poor, the inlet temperature may increase to a point where the vehicle stops charging to protect the terminal from overheating, even if the vehicle is not fully charged.
• 10129533Feb 26, 2014Electrical system. Service bulletin - The Fit EV is designed to charge at a high rate resulting in a shorter charge time. If the connection between the charger and the charge inlet terminal is poor, the inlet temperature may increase to a point where the vehicle stops charging to protect the terminal from overheating, even if the vehicle is not fully charged.
• 10055126Feb 26, 2014Electrical system. Honda: inlet temperature can increase to a point where vehicle stops charging and protects terminal from overheating, if connection between charger and charge inlet terminal is poor and vehicle fails to fully charge. Model 2013 fit ev.
• 10129552Feb 18, 2014Fuel system. Service bulletin - The MIL comes on and DTC P0455 (EVAP system large leak) and/or DTC P0456 (EVAP system very small leak detected) is set. The fuel fill cap (gas cap) may also be loose or have a stick-slip feeling when tightened. The fuel fill cap gasket creates too much friction, preventing the cap from sealing properly.
• 10129811Feb 10, 2014Equipment. Dealer message - Today, February 7, 2014, American Honda is announcing a product update for all 2013 Fit EV vehicles. The product update addresses issues with poor connections between the vehicle?s charge inlet terminal and certain chargers that may trigger the overheat failsafe during vehicle recharging due to excessive resistance. There is no problem with the vehicle, and no risk of overheating. This product…
• 10139608Feb 7, 2014Electrical system. Dealer message - Today, February 7, 2014, American Honda is announcing a product update for all 2013 Fit EV vehicles. The product update addresses issues with poor connections between the vehicle?s charge inlet terminal and certain chargers that may trigger the overheat failsafe during vehicle recharging due to excessive resistance. There is no problem with the vehicle, and no risk of overheating. This product…
• 10054946Feb 7, 2014Electrical system. Honda: there is a poor connection between charge inlet terminal, on vehicle and chargers, that trigger overheat failsafe during recharging due to excessive resistance. Model 2013 fit ev.

← All problems reported for the 2013 Honda Fit