2018 Honda Ridgeline Technical Service Bulletins

113 technical service bulletins (TSBs) are on record for the 2018 Honda Ridgeline. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10152746Jan 11, 2019Latches, locks and linkages, Body and structure. Dealer message - American Honda (AHM) is investigating certain 2018-2019 Ridgelines with a customer complaint of the tailgate not opening from the side. To fully understand the cause of this condition, AHM would like to inspect the vehicle prior to you attempting a repair of any kind.
• 10145428Oct 4, 2018Equipment. Service bulletin - The A/C does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained. There is poor O-ring compression against the receiver/dryer barrel wall.
• 10145389Sep 18, 2018Body and structure. Service bulletin - The hood flutters or vibrates at highway speeds. Adjust the hood edge cushions to slightly touch the hood while still maintaining proper hood alignment. Inspect the adhesive between the hood skin and the support structure. Apply 3M ULTRAPRO Autobody sealant between hood skin and support structure if needed.
• 10144790Aug 25, 2018Equipment. Service bulletin - The A/C does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained. There is poor O-ring compression against the receiver/dryer barrel wall.
• 10143359Jul 20, 2018Engine, Fuel system. Service bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
• 10143229Jul 20, 2018Fuel system. Service bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
• 10141167Jun 7, 2018Body and structure. Service bulletin - The roof molding front end caps become loose and lift away from roof panel. The roof molding front end caps are not held on securely.
• 10139552May 18, 2018Body and structure, Equipment. Service bulletin - The roof molding front end caps become loose and lift away from roof panel. The roof molding front end caps are not held on securely.
• 10142615May 9, 2018Fuel system. Service bulletin - The customer is unable to insert the fuel nozzle into the filler neck and fuel the vehicle in cold weather. Water or moisture has entered the fueling area and frozen the capless fuel shutter set in the fuel filler neck.
• 10136413Apr 26, 2018Fuel system, Engine. Service bulletin - There is a chirping coming from the engine area with the engine warmed up. The high pressure fuel pump is making a chirp.
• 10135066Apr 16, 2018Transmission and drivetrain. Service bulletin - When adjusting the driver's seat height or tilt, the power seat does not move or moves just a small amount and clicks loudly during operation. The vertical transmission assembly (VTA) unit has a stripped internal gear.
• 10133020Mar 16, 2018Fuel system. Service bulletin - The customer is unable to insert the fuel nozzle into the filler neck and fuel the vehicle in cold weather. Water or moisture has entered the fueling area and frozen the capless fuel shutter set in the fuel filler neck.
• 10115757Aug 3, 2017Steering. Service news article - To prevent damage during shipping, leather-wrapped steering wheels come with a protective plastic covering. The easiest way to remove it during PDI is to grab the covering with both hands near the top of the steering wheel and pull it toward you, like you see here. The covering comes right off.

← All problems reported for the 2018 Honda Ridgeline