2018 Hyundai Elantra GT Technical Service Bulletins

117 technical service bulletins (TSBs) are on record for the 2018 Hyundai Elantra GT. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10211666Apr 28, 2022Engine cooling. Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10211664Apr 28, 2022Engine cooling. Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair…
• 10211662Apr 28, 2022Engine cooling. Certain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10211680Apr 8, 2022Steering. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211678Apr 8, 2022Steering. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10210206Mar 10, 2022Electrical system, Engine cooling. Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
• 10210205Mar 8, 2022Electrical system, Engine cooling. Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In…
• 10207803Jan 3, 2022Engine cooling, Electrical system. Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In…
• 10206366Dec 21, 2021Engine cooling. Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair…
• 10203272Oct 1, 2021Steering. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
• 10201468Aug 19, 2021Transmission and drivetrain. Certain vehicles (listed below) equipped with 7-speed Dual Clutch Transmission (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing and replacing the Double Clutch, including a Transmission Control Unit (TCU) software update.
• 10190044Mar 30, 2021Equipment, Engine cooling. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038Mar 23, 2021Equipment, Brakes. This bulletin provides best practice recommendations when performing brake service procedures.
• 10189989Mar 10, 2021Engine cooling, Equipment. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
• 10183963Nov 30, 2020Brakes. This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
• 10183960Nov 19, 2020Tires, Wheels. This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
• 10180985Sep 9, 2020Steering, Equipment. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10180981Sep 9, 2020Steering, Equipment. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10181000Sep 2, 2020Engine cooling. This bulletin provides information related to an ECM (Engine Control Module) software update for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic revision. There are no drivability symptoms associated with DTC P0128.
• 10179246Aug 10, 2020Electrical system, Steering. Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
• 10179244Aug 10, 2020Electrical system, Steering. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10178175Jul 14, 2020Equipment, Exterior lighting. This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or…
• 10176195May 21, 2020Transmission and drivetrain. If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 3.  Check Engine light on  DTC P0880/P088000 - TCM Power signal error open/short  Transmission stuck in 4th gear fail-safe  Harsh shift into Drive and Reverse
• 10176182May 6, 2020Wheels, Tires. This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
• 10176178May 1, 2020Equipment. This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
• 10174808Apr 23, 2020Equipment, Electrical system. This bulletin provides information on identifying dealer stock vehicles with either: • A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. • A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
• 10174807Apr 17, 2020Equipment, Transmission and drivetrain. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
• 10174800Apr 9, 2020Equipment, Transmission and drivetrain. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the oil pressure harness.
• 10173549Mar 25, 2020Brakes. If you are servicing an applicable vehicle with a (Check Engine Light on) and one or more of the DTC listed below, follow the repair procedure and replace the input/output speed sensor and oil pressure harness.
• 10173546Mar 23, 2020Equipment. This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
• 10173545Mar 18, 2020Electrical system. This bulletin describes the mandatory procedure to submit battery test data electronically for battery warranty claims by running the GDS Battery Claim App. The App must be run right after an incident battery is removed from the vehicle or after a battery charge is completed which qualifies for a warranty. It must be run at any time between RO open and close dates.
• 10172225Feb 20, 2020Equipment, Transmission and drivetrain, Electrical system. If you are servicing an applicable vehicle with a “Check Engine” light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
• 10172142Feb 5, 2020Suspension. This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
• 10172140Feb 4, 2020Engine cooling. Some 2018-2019MY Elantra (AD) and Elantra GT (PD) 2.0L vehicles may have a weakened weld near where the center muffler is attached to the exhaust pipe. This condition may cause the center exhaust pipe of the muffler to exhibit an exhaust leak and/or exhaust noise. Follow the procedure outlined in this bulletin to replace the center muffler assembly to correct this condition.
• 10170883Jan 16, 2020Electrical system. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
• 10170896Jan 3, 2020Steering. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10170899Jan 2, 2020Transmission and drivetrain. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
• 10170511Dec 17, 2019Equipment, Transmission and drivetrain. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so…
• 10169380Nov 15, 2019Electrical system. If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch range/performance ?P0707 - Range switch - open circuit ?P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ?Malfunction Indicator Light (MIL) illuminated ?4th gear fail-safe ?No gear…
• 10169379Nov 15, 2019Electrical system, Engine cooling. This bulletin provides information related to an ECM (Engine Control Module) software update for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic revision. There are no drivability symptoms associated with DTC P0128.
• 10169378Nov 15, 2019Engine cooling, Electrical system. Hyundai has launched a Service Campaign to update the ECM (Engine Control Module) software for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic improvement.
• 10169370Nov 4, 2019Back-over prevention (rear camera), Lane departure. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the…
• 10167253Oct 14, 2019Equipment. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
• 10165456Aug 12, 2019Equipment, Electrical system. If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
• 10163279Jun 4, 2019Transmission and drivetrain. This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
• 10161750May 8, 2019Transmission and drivetrain. This bulletin provides a procedure to transfer pressure data to the ECU/TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
• 10160156Apr 30, 2019Electrical system, Engine cooling. Hyundai has launched a Service Campaign to update the ECM (Engine Control Module) software for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic improvement.
• 10160155Apr 30, 2019Electrical system. Hyundai Motor America is conducting a Service Campaign to update the ECM software on certain 2018 Model Year Elantra GT and 2019 Veloster vehicles equipped with 1.6L turbo engines. Service Campaign T3T provides a procedure to update the ECM software.
• 10160154Apr 30, 2019Engine cooling. This bulletin provides information related to an ECM (Engine Control Module) software update for DTC P0128: Coolant Thermostat (Coolant Temp below Thermostat Regulating Temperature) logic revision.
• 10160106Apr 22, 2019Steering. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.

← All problems reported for the 2018 Hyundai Elantra GT