2014 Hyundai Genesis Coupe Technical Service Bulletins

78 technical service bulletins (TSBs) are on record for the 2014 Hyundai Genesis Coupe. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10172142Feb 5, 2020Suspension. This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
• 10170883Jan 16, 2020Electrical system. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
• 10170511Dec 17, 2019Equipment, Transmission and drivetrain. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so…
• 10169370Nov 4, 2019Back-over prevention (rear camera), Lane departure. The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the…
• 10167253Oct 14, 2019Equipment. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
• 10167733Oct 7, 2019Engine. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
• 10167235Oct 7, 2019Transmission and drivetrain. This bulletin provides information regarding the changes in the timing chain and the crankshaft sprockets on certain Azera (HG), Santa Fe/Santa Fe XL (NC), Genesis (BH/DH), Genesis Coupe (BK), and G90 (HI) vehicles equipped with Lambda 3.3L / 3.8L GDI engines.
• 10163286Jun 12, 2019Transmission and drivetrain. This bulletin provides a procedure to diagnose an 8-speed automatic transaxle with a harsh and/or delayed shift using GDS.
• 10161753May 30, 2019Electrical system. This bulletin provides information related to clearing all Diagnostic codes for vehicles equipped with the Blue Link system (Gen 1).
• 10161685May 6, 2019Transmission and drivetrain. The procedure describes the procedure to check the ATF level for 8-speed Rear-Wheel-Drive vehicles.
• 10160100Apr 15, 2019Transmission and drivetrain, Engine. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E-module.
• 10160098Apr 15, 2019Electrical system, Transmission and drivetrain. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
• 10160097Apr 15, 2019Transmission and drivetrain, Equipment. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
• 10158803Mar 13, 2019Visibility (wipers, defrost, mirrors). This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
• 10158797Mar 7, 2019Engine. If you are servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E-module.
• 10110919Feb 2, 2017Transmission and drivetrain. The following vehicles are equipped with an 8-speed automatic transmission. The ATF level can be checked by the procedure shown below.
• 10089506Dec 6, 2016Transmission and drivetrain, Vehicle speed control, Equipment. Do not replace the transmission for the dtc listed. Instead, follow the repair procedure and replace the e-module.
• 10089623Nov 4, 2016Transmission and drivetrain. "update the warranty information. Description: do not replace the transmission for the dtc listed below. Instead, follow the repair procedure and replace the e-module."
• 10088664Oct 20, 2016Air bags, Seats. The hyundai genesis coupe is equipped with an occupant classification system (ocs) to determine if the front passenger seat is occupied, and if so, detect the presence of a child restraint system or small statured occupant. In certain cases, the front passenger airbag is deactivated to help prevent airbag-related injuries to the front passenger.
• 10089604Oct 18, 2016Transmission and drivetrain. "automatic transmission solenoid & sensor replacement for dtc p0741, p0743, p0748, p0753, p0758, p075a, p0763, p0768, p0773, p2709 & p0841"
• 10082461Sep 9, 2016Transmission and drivetrain. This bulletin provides a procedure to transfer pressure data to the tcm using gds mobile. This procedure is necessary to reduce the tcm learning time and improve the shift quality.
• 10082455Aug 9, 2016Transmission and drivetrain. "the pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm adaptive values. After the following repairs have been completed, the pcm/tcm adaptive values must be reset in order to provide optimum shift quality. If the procedure is not…
• 10060627Nov 1, 2014Electrical system. Summary to be provided on a future date.
• 10060969Oct 1, 2014Electrical system. Summary to be provided on a future date.
• 10060591Jul 8, 2014Electrical system. Summary to be provided on a future date.
• 10059667May 1, 2014Equipment, Transmission and drivetrain. Summary to be provided on a future date.
• 10061239Apr 1, 2014Electrical system. Summary to be provided on a future date.
• 10060624Mar 1, 2014Back-over prevention (rear camera). Summary to be provided on a future date.

← All problems reported for the 2014 Hyundai Genesis Coupe