2011 Hyundai Genesis Technical Service Bulletins

68 technical service bulletins (TSBs) are on record for the 2011 Hyundai Genesis. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 11038692Oct 22, 2026Body and structure. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly.
• 11038456Oct 7, 2026Engine. Certain vehicles equipped with internal combustion engines may exhibit higher-than-expected engine oil consumption. This bulletin provides the inspection and repair procedures for vehicles exhibiting this condition. All internal combustion engines consume engine oil as part of normal engine operation. Oil consumption rates may vary based on mileage, operating conditions, driving habits, and maintenance history.
• 11032523Apr 10, 2026Air bags. The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag…
• 11032522Apr 10, 2026Air bags. The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during…
• 11025476Nov 6, 2025Exterior lighting. This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or…
• 10253275Apr 9, 2024Transmission and drivetrain. This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
• 10251285Feb 14, 2024Visibility (wipers, defrost, mirrors). This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass.
• 10251277Feb 2, 2024Fuel system. This bulletin outlines the basic components of the BG Fuel Test Kit and the procedure to test the quality of the fuel during vehicle diagnosis. Poor fuel quality may lead to cold engine startability issues, hesitation at idle or during acceleration, and/or poor driveability. In addition, prolonged vehicle operation with poor quality fuel may result in damage to the fuel system and formation of engine deposits.
• 10247189Oct 13, 2023Engine cooling. This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10235566Apr 24, 2023Body and structure. Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235526Apr 12, 2023Body and structure. In certain areas, a vehicle’s underbody may exhibit corrosion due to road-salt usage. As a preventative measure, a cavity wax coating is applied to the internal surfaces of underbody components and an undercoating spray is applied to exterior surfaces of specified underbody components. The service campaign describes the procedure to perform this preventative service on certain 2009-2014MY Genesis Sedan (BH)…
• 10235525Apr 12, 2023Body and structure. In some areas, a vehicle’s underbody may exhibit corrosion due to road salt usage. As a preventative measure, cavity wax coating is applied to the internal surfaces of underbody components, and an undercoating spray is applied to the bottom exterior surfaces of specified underbody components. This bulletin describes the procedure to perform this preventative service on certain Genesis Sedan (BH), Equus (VI), and…
• 10230904Jan 30, 2023Visibility (wipers, defrost, mirrors). This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or…
• 10217251Jul 28, 2022Engine cooling. Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10217310Jul 14, 2022Equipment. Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of the Gross Vehicle Weight Rating or 100 pounds. If the total added weight exceeds the lesser of the limit, a label (See Figure 1) must be added to the…
• 10217258Jul 14, 2022Tires. Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1…
• 10213727May 9, 2022Equipment, Brakes. The warranty coverage for the hydraulic electronic control unit (HECU) for certain 2009-12 Genesis (BH) and 2011-12 Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
• 10213723May 9, 2022Brakes. The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.
• 10210203Mar 24, 2022Engine cooling. The warranty coverage for the hydraulic electronic control unit (HECU) for certain Genesis (BH) and Equus (VI) vehicles for repairs and replacement has been extended to 15 years with unlimited miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owners.
• 10208866Feb 3, 2022Equipment, Brakes. The brake fluid specifications labeled on the master cylinder reservoir cap and in the vehicle owner’s manual require revision to indicate DOT 4 brake fluid only. This bulletin describes the procedure to replace the master cylinder reservoir cap and apply a sticker to the owner’s manual with the revised brake fluid specification.
• 10204249Nov 8, 2021Transmission and drivetrain. This bulletin describes the procedure to replace the 35R and 4&OD solenoids for a shift flare and/or harsh shift during the 2~3, 3~4 or 4~5 upshift.
• 10196577May 14, 2021Steering, Air bags. The warranty coverage for the clock spring has been extended to 15 years with unlimited mileage from the date of original retail delivery or date of first use, whichever occurs first. This warranty coverage applies to both the original and subsequent owners. Refer to the warranty and service parts information outlined in this bulletin whenever clock spring replacement is required.
• 10190044Mar 30, 2021Engine cooling, Equipment. This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038Mar 23, 2021Equipment, Brakes. This bulletin provides best practice recommendations when performing brake service procedures.
• 10189989Mar 10, 2021Engine cooling, Equipment. This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
• 10183963Nov 30, 2020Brakes. This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
• 10183960Nov 19, 2020Wheels, Tires. This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the “Tire Balance Data Sheet” must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
• 10178175Jul 14, 2020Equipment, Exterior lighting. This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or…
• 10176182May 6, 2020Tires, Wheels. This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
• 10176178May 1, 2020Equipment. This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
• 10174808Apr 23, 2020Electrical system, Equipment. This bulletin provides information on identifying dealer stock vehicles with either: • A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. • A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
• 10174807Apr 17, 2020Equipment, Transmission and drivetrain. The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
• 10173546Mar 23, 2020Equipment. This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
• 10172142Feb 5, 2020Suspension. This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
• 10170883Jan 16, 2020Electrical system. This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
• 10169370Nov 4, 2019Lane departure, Back-over prevention (rear camera). The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the…
• 10167253Oct 14, 2019Equipment. This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
• 10160098Apr 15, 2019Electrical system, Transmission and drivetrain. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
• 10128606Jan 11, 2018Seat belts. The front seat belt assembly incorporates a seat belt anchor pretensioner fastened to the vehicle?s front seat frame. During vehicle assembly, the anchor pretensioner is fastened to the front seat frame prior to being connected to the seat belt linkage. If, during vehicle repair, the connector does not fully latch when the linkage was pressed onto the connector, the seat belt can detach from the anchor pretensioner.
• 10128604Jan 11, 2018Equipment. Hyundai Motor America is changing the Genesis sedan applicable model years to 2011-14 for service campaign T2R. Service Campaign T2R provides a service procedure to install warning labels on the front seat belt assemblies on 2011-2016 Equus vehicles and 2011-14 model year Genesis sedans.
• 10127006Dec 13, 2017Seat belts. The front seat belt assembly incorporates a seat belt anchor pretensioner fastened to the vehicle's front seat frame. During vehicle assembly, the anchor pretensioner is fastened to the front seat frame prior to being connected to the seat belt linkage. If, during vehicle repair, the connector does not fully latch when the linkage was pressed onto the connector, the seat belt can detach from the anchor pretensioner.
• 10126997Dec 13, 2017Seat belts, Equipment. Hyundai Motor America is conducting a Service Campaign to install warning labels on the driver's and/or passenger's seat belt assemblies on 2009-14 Model Year Genesis sedan and 2011-16 Equus vehicles. Service Campaign T2R provides a service procedure to install warning labels on the front seat belt assemblies.
• 10082455Aug 9, 2016Transmission and drivetrain. "the pcm or tcm contains logic to adjust solenoid duty and line pressure as needed to compensate for normal clutch wear over the life of the transaxle. This bulletin provides the procedures necessary to reset (erase) and relearn the pcm/tcm adaptive values. After the following repairs have been completed, the pcm/tcm adaptive values must be reset in order to provide optimum shift quality. If the procedure is not…
• 10082434May 18, 2016Visibility (wipers, defrost, mirrors). This bulletin provides the warranty extension and related service parts information for the windshield wiper motor in some genesis sedan (bh) and equus (vi) vehicles. The subject vehicles are equipped with a windshield wiper motor which may have been manufactured with a cover seal that was subsequently revised by the supplier.
• 10082380May 17, 2016Visibility (wipers, defrost, mirrors). "hyundai motor america is announcing a warranty extension for the windshield wiper motor on the subject vehicles to 10 years from the date of original delivery or the date of first use, or 100,000 miles, whichever occurs first. The windshield wiper motor may either function intermittently or stop functioning."
• 10059716Mar 1, 2014Equipment, Latches, locks and linkages. Summary to be provided on a future date.
• 10060572Feb 11, 2014Brakes. Summary to be provided on a future date.
• 10060587Dec 20, 2013Equipment. Summary to be provided on a future date.
• 10066785Nov 18, 2013Equipment. Summary to be provided on a future date.
• 10060578Nov 1, 2013Equipment. Summary to be provided on a future date.

← All problems reported for the 2011 Hyundai Genesis