2019 Hyundai Ioniq Plug-In Hybrid Technical Service Bulletins

66 technical service bulletins (TSBs) are on record for the 2019 Hyundai Ioniq Plug-In Hybrid. TSBs are notes manufacturers send to dealers about repair procedures for issues seen in the field. They are not recalls and do not by themselves mean a vehicle has a fault.

• 10163863Jul 10, 2019Electrical system, Equipment. This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Intl. (KBI).
• 10161751May 16, 2019Forward collision avoidance, Lane departure. This bulletin provides information for troubleshooting of the Blind-Spot Collision Warning (BCW/BSD) system whenever it exhibits Diagnostic Trouble Code (DTC) C120B/D or C160A.
• 10160148Apr 23, 2019Electrical system. The following summarizes the service procedures for Lithium Battery replacement:
• 10160106Apr 22, 2019Steering. This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
• 10160102Apr 19, 2019Engine, Engine cooling. This bulletin provides additional service diagnostic information and repair procedures related to electric A/C compressors equipped in hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles.
• 10160098Apr 15, 2019Electrical system, Transmission and drivetrain. This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
• 10154670Feb 6, 2019Electrical system, Equipment. The D-Audio lite head home screen on certain 2018 Tucson (TL) and 2018-19 Ioniq Plug-in Hybrid (AE PHEV) vehicles may remain blank. A D-Audio Software Update provided through a USB stick has been made available to correct this issue.
• 10154669Feb 6, 2019Electrical system. This bulletin describes the procedure to update the D-Audio lite head unit on certain Tucson (TL) and Ioniq Plug-in Hybrid (AE PHEV) to correct the home screen remaining blank.
• 10154668Feb 6, 2019Electrical system. Hyundai Motor America is conducting Service Campaign T3R to update the D-Audio lite head unit software on certain 2018 Model Year Tucson and 2018-19 Ioniq Plug-In Hybrid vehicles. Service Campaign T3R provides a service procedure to update the D-Audio lite software for home screen remaining blank.
• 10152891Jan 30, 2019Electrical system. This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Inc. (KBI).
• 10152867Dec 20, 2018Electrical system. This bulletin provides information related to an ECM (Engine Control Module) ECU software update for OBD (On Board Diagnostics) logic improvement. The Freeze Frame Data has been updated for multiple DTC.
• 10152866Dec 20, 2018Electrical system. Hyundai Motor America is conducting a Service Campaign to update the ECM software on certain Dealer Stock 2019 Model Year Ioniq Hybrid and Plug-In vehicles. Service Campaign T3P provides a procedure to update the ECM software.
• 10152856Dec 6, 2018Electrical system. This bulletin provides the procedures for calibrating Ioniq Hybrid sensors using GDS whenever the components listed below are replaced or the DTC listed are stored.
• 10151892Nov 2, 2018Latches, locks and linkages, Electrical system. Some Ioniq EV (AE EV) and Ioniq Plug-in Hybrid (AE PHEV) vehicles may experience a charging connector lock/unlock actuator malfunction, which may cause: The charging connector to not remain locked when the charger is inserted into the charging port. And/or the charging connector to be unable removed from the vehicle charging port. This bulletin provides part replacement instruction and information on the…
• 10147417Oct 24, 2018Electrical system. This bulletin describes the procedure to update the ESCAHB (Electronic Stability Control Active Hydraulic Braking) software on 2019 model year Ioniq Hybrid/Plug-in Hybrid (AE HEV/PHEV) vehicles to revise the sensitivity of the brake pedal application.
• 10147416Oct 24, 2018Electrical system. Hyundai Motor America is conducting Service Campaign to update the ESCAHB(electronic stability control active hydraulic braking) software on certain dealer stock 2019 Ioniq Hybrid and Plug-In Hybrid vehicles. Service Campaign T3H provides a service procedure to update the ESCAHB software.

← All problems reported for the 2019 Hyundai Ioniq Plug-In Hybrid