Itasca Navion Problems by Model Year
NHTSA recorded 14 consumer complaints across the 2 model years of the Itasca Navion (2006–2007) that have at least 5 complaints. 2006 has the most, with 9. Across all years, the part named most often is engine cooling (8 mentions). Pick a model year below to see its parts, mileage, recalls and service bulletins.
All Navion model years
Years with fewer than 5 complaints are not listed. The score compares years of the same model, allowing for the era and for how long each year has collected complaints: 50 is a typical year, lower means fewer complaints. It is not adjusted for sales volume.
| Year | Complaints | Median mi | Recalls | TSBs | Score (50 = typical) | Trend |
|---|---|---|---|---|---|---|
| 2007 | 5 | 15,394 | 1 | 0 | — | Not enough data |
| 2006 | 9 | 4,500 | 4 | 0 | — | Not enough data |
Parts named most often, all years
Counts add up complaint mentions across the listed years. A complaint can name several parts.
- Engine cooling8 50%
- Latches, locks and linkages3 19%
- Transmission and drivetrain1 6.3%
- Steering1 6.3%
- Fuel system1 6.3%
- Electrical system1 6.3%
- Brakes1 6.3%
Example complaints
One per model year, chosen for length and detail. Personal details are removed. They are consumer reports, not findings.
2006: “I responded to a recall notice (s91) ABS brake light indicator light malfunction. I was advised that this is done as a software update to the computer on my sprinter motor home. The work was done by arrigo dodge.. However, the next time I used the motor home, the ABS break system failed (while evacuating hurricane irma) thus causing the motor home to get stuck in 2nd gear with no ABS brakes.. The total bill for parts and labor was $5,054.26. The grand total was $7678.49 after all other expenses. At this time, the motor home does not have a working ABS brake system which is a safety issue. …”
NHTSA complaint #11073252, filed 2018-02, 50,000 miles2007: “While driving on the expressway in my 2007 Itasca Navion, the turbo resonator failed. That caused the speed to drop quickly to 40 MPH. I nearly avoided an accident with a truck that was behind me. The part is made of plastic and is in a hot environment. The seams separate and causes the vehicle to go into limp home mode. This defect has been discussed widely in several internet forums. The part was replaced by a dodge sprinter dealer and the parts man said that they have replaced many of them.”
NHTSA complaint #10196795, filed 2007-07, 401 milesOther Itasca models
22 complaintsItasca Suncruiser
11 complaintsItasca Horizon
6 complaintsItasca Sundancer
5 complaints
About this data. Data from NHTSA (ODI) complaints, recalls, TSBs and investigations, updated Oct 29, 2026. Complaints are unverified consumer reports and may be duplicated or inaccurate. Methodology