1988 Jeep Wrangler Recalls

NHTSA lists 3 recall campaigns for the 1988 Jeep Wrangler. A recall applies only to vehicles built within the affected range, so check your own VIN at nhtsa.gov/recalls. Repairs for recalls are free at a franchised dealer.

• 94V106000Jun 9, 1994230,000 vehicles potentially affected
  Fuel system, gasoline › Delivery › Fuel pump
  Covers: Jeep Wrangler 1987–1994

  Reported issue: Vehicle description: multipurpose passenger vehicles equipped with plastic fuel tanks. The fuel tank sending unit gasket can crack causing fuel and fuel vapor leaks.

  Possible consequence: Fuel and fuel vapor leaked from the fuel tank can result in fire when exposed to a source of ignition.

  Remedy: Replace the fuel tank sending unit gasket.

  Full campaign details →

• 92V148000Oct 14, 1992280,000 vehicles potentially affected
  Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings
  Covers: Jeep Wrangler 1987–1992

  Reported issue: On 1987 through early 1990 models, both front brake hoses can wear due to direct contact with the wheel opening splash shields. On the late 1990 through 1992 models, periodic rubbing contact of the left front brake hose can occur due to movement of the splash shield in certain vehicle operating conditions.

  Possible consequence: Either condition can cause loss of front brake systemfunctions, resulting in increased stopping distances and an increased risk ofvehicle accident.

  Remedy: The 1987 to 1990 model vehicles will have both splash shields replaced and both front brake hoses replaced as necessary. All affected late 1990 through 1992 model year vehicles will have additional fasteners installed to further secure the left side splash shield. Also, the left front brake hose will be inspected and…

  Full campaign details →

• 88V155000Sep 29, 198875,000 vehicles potentially affected
  Visibility › Windshield wiper/washer › Linkages
  Covers: Jeep Wrangler 1987–1988

  Reported issue: Windshield frame metal may crack at the wiper arm pivot mountings due to metal stress during wiper operation.

  Possible consequence: This can cause dislocation and binding of the wipersystem linkage which, in inclement weather, could affect driver visibility andresult in an accident.

  Remedy: Retrofit with a windshield frame reinforcement at the wiper pivot locations and redesigned linkage components to reduce stress at the pivot mountings.

  Full campaign details →

NHTSA investigations

• RQ97016FUEL LEAKAGEClosed · Oct 27, 1997
• PE95020Seat back failureClosed · Mar 27, 1995
• EA94031Seat belt buckle failureClosed · Aug 30, 1994
• PE94037Seat belt buckle failureClosed · Apr 26, 1994
• EA93031Sending unit gasket failsClosed · Dec 15, 1993
• PE92075Exhaust system firesClosed · Sep 9, 1992
• EA92014Fuel tank/exhaust interferClosed · May 22, 1992
• PE92016Fuel tank/exhaust interferClosed · Feb 5, 1992

← All problems reported for the 1988 Jeep Wrangler